Sort By
Telecom Equipment Testing for MTCTE Compliance Telecom equipment testing services evaluate electrical, RF and EMC characteristics to meet MTCTE compliance requirements. This service is targeted at product teams, QA and regulatory functions that must demonstrate device conformance to telecom-specific safety and performance criteria before deployment. Testing & Calibration Capability Overview RF performance testing, EMC/EMI assessments and electrical safety verification. Instrumentation: spectrum analyzers, network analyzers, and EMC chambers used for measurement. Test conditions: conducted and radiated emissions, immunity tests and protocol-level checks. Reporting: consolidated test reports with measured parameters and compliance commentary. Sample handling: detailed configuration and firmware state logs accompany each device test. Booking & Turnaround Details Service Format: In-lab testing with pre-test setup and functional verification. Turnaround Time: Typically 7â12 working days for complete RF and EMC suites; extended for complex multi-band devices. Sample Requirement: Multiple units and a test-ready firmware image are recommended for full verification. Pricing Basis: Quoted per test suite, depending on bands and immunity levels required. Quality Assurance: Calibration logs and method statements are provided with reports.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Wood, Paper & Pulp Testing for Export Products Wood, paper and pulp testing services provide mechanical, chemical and moisture analysis to support product quality and export compliance. Laboratories deliver data on tensile strength, burst, grammage, moisture content and pulp chemistry to help exporters and procurement teams meet buyer specifications and shipment requirements. Scope of Testing, Calibration & Accreditation Mechanical tests: tensile, tear, and burst strength for paper products. Pulp analysis: Kappa number, residual lignin and bleaching chemical residues. Moisture and dimensional stability checks for wood-based panels. Reporting: data tables and interpretation aligned to buyer specifications. Traceability: method logs and calibration records accompany results. Turnaround Time & Commercial Terms Service Format: In-lab testing with sample acceptance and conditioning protocols. Turnaround Time: Typically 5â10 working days depending on test suite and sample conditioning. Sample Requirement: Representative lots or panels as per the test method requirements. Pricing Basis: Quoted per-parameter and by sample volume; export bundling options available. Quality Assurance: Measurement uncertainty statements and calibration evidence provided with reports.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Textile Testing for Apparel & Home Textile Buyers Textile testing services evaluate fiber composition, mechanical strength, colorfastness and safety attributes for apparel and home textiles. The laboratory provides analytical and physical test suites used by product teams, sourcing and QA to verify supplier claims and ensure product performance under use conditions. Scope of Testing, Calibration & Accreditation Fiber identification, composition analysis and blend verification. Mechanical tests: tensile, tear, and seam strength per standard methods. Colorfastness: wash, rub and light fastness tests to assess performance. Safety checks: restricted substance screening and flammability tests where applicable. Clear reporting with test data and compliance interpretation for procurement. Turnaround Time & Commercial Terms Service Format: In-lab sample testing for fabric swatches, cut panels and finished products. Turnaround Time: Typically 5â9 working days for routine suites; extended timelines for specialised or batch-wide testing. Sample Requirement: Swatches or finished samples as per standard sampling protocols; quantity depends on the tests requested. Pricing Basis: Quoted per-parameter and by sample count; package rates for routine QC available. Quality Assurance: Method summaries and measurement uncertainty notes accompany reports.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Toy Safety Testing for Manufacturers & Importers Toy safety testing evaluates mechanical, physical, chemical and flammability hazards to ensure products meet applicable safety standards. The laboratory service helps manufacturers, importers and QA teams confirm compliance with regional toy safety requirements and supports documentation for market access. Scope of Testing, Calibration & Accreditation Mechanical and physical tests for choking, sharp edges, and small parts where applicable. Chemical screening for restricted substances and migration tests where required. Flammability and thermal tests for relevant toy classes and materials. Performance tests for moving parts and durability under simulated use conditions. Detailed reporting for procurement and regulatory filing. Booking & Turnaround Details Service Format: In-lab testing with method-driven sampling and functional verification. Turnaround Time: Typically 7â12 working days for comprehensive safety suites. Sample Requirement: Production samples representative of finished goods including packaging. Pricing Basis: Per-test and per-sample pricing depending on complexity and number of safety modules required. Quality Assurance: Method statements and result interpretation provided to support procurement decisions.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Sanitaryware Testing for WC & Plumbing Products Sanitaryware testing services evaluate dimensional accuracy, hydraulic performance and durability of WC and plumbing fixtures. The service is used by procurement, specification and QA teams to verify product fit, flow rates, sealing and long-term performance under operating conditions. Service Scope & Accreditation Details Dimensional verification, flow rate, trap seal and flush performance testing. Durability cycles for mechanical parts such as flush valves and hinges. Material and surface integrity checks for glazing and finish. Detailed test reports supporting procurement acceptance and installation planning. Traceability through method logs and measurement records. Booking & Turnaround Details Service Format: In-lab testing of fixtures and component assemblies; on-site inspection available for installed products. Turnaround Time: Typically 5â10 working days for standard suites; longer for expansive durability cycles. Sample Requirement: Production samples or representative assemblies per test program. Pricing Basis: Quoted per-test and by sample handling needs; bundled packages for vendor qualification are available. Quality Assurance: Calibration records and method details accompany each report.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Soaps & Detergents Testing for FMCG Brands Soaps and detergents testing provides analytical and performance evaluation services for formulation, stability, and safety of consumer cleaning products. This testing service supports QA, regulatory and product development teams by quantifying active content, pH, foam performance, and stability under storage conditions. Scope of Testing, Calibration & Accreditation Applicable tests: active matter content, pH, viscosity, foam stability, and microbial limits where required. Performance testing: wash-efficiency and fabric compatibility assessments per method protocols. Stability: accelerated ageing and storage-condition monitoring to predict shelf life. Reporting: batch-level results, method descriptions, and pass/fail criteria for product release. Traceability: sample logs and controlled method records for procurement audits. Turnaround Time & Commercial Terms Service Format: In-lab sample testing with standard turnaround tiers. Turnaround Time: Typically 5â9 working days depending on test battery and microbial analyses. Sample Requirement: Representative production samples or retained lab samples per test method. Pricing Basis: Quoted per-parameter and by sample volume; consolidated packages for routine QC are available. Quality Assurance: Method statements and result variance reporting to support procurement decisions.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Tyre & Tube Testing for Automotive Suppliers Tyre and tube testing services assess mechanical durability, pressure retention, and thermal behaviour to ensure safety and performance for automotive applications. The laboratory service supports supplier qualification, product development, and batch release by providing data on endurance, wear and sealing integrity. Service Scope & Accreditation Details Endurance and fatigue testing under controlled load cycles. Pressure retention and leakage assessments for tube assemblies. Tread wear, rolling resistance and high-speed stability evaluations. Thermal ageing and ozone resistance checks for compound validation. Detailed reporting with test curves and pass/fail interpretation for procurement. Booking & Turnaround Details Service Format: In-lab mechanical and thermal testing with instrumented fixtures. Turnaround Time: Typically 7â14 working days depending on endurance cycles and test program complexity. Sample Requirement: Multiple specimens per test type, often several assemblies for endurance cycles. Pricing Basis: Quoted per-test and per-cycle basis; comprehensive test programs are priced as packages. Quality Assurance: Instrument calibration and cycle traceability are included with final reports.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Rubber & Polymer Testing for Industrial Products Rubber and polymer testing services evaluate mechanical, thermal and chemical performance of elastomers and polymer components. The laboratory service helps procurement, R&D and QA teams confirm material grade, validate supplier claims, and assess suitability for end-use conditions. Testing & Calibration Capability Overview Tensile and elongation testing using universal testing machines for strength and elongation metrics. Hardness measurement (Shore A/D) and compression set evaluations per relevant test methods. Thermal analysis (DSC/TGA) for service temperature and degradation profiling. Chemical resistance and extraction testing for formulation validation. Detailed test reports with measured values and pass/fail guidance for procurement. Engagement Terms & Scheduling Service Format: In-lab testing for samples and components; limited on-site sampling support available. Turnaround Time: Typically 5â8 working days for standard mechanical and thermal suites; extended timelines for complex combinational testing. Sample Requirement: Typical 2â5 specimens depending on test method; larger panels may be required for compositional analysis. Pricing Basis: Priced per-parameter and sample prep; combined test packages available for full qualification. Quality Assurance: Method statements and measurement uncertainty are provided to support procurement decisions.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
power supply testing service for inverters & stabilizers This power supply testing service helps electrical design, QA and procurement teams evaluate inverter efficiency, standby losses, waveform quality and voltage regulation under load. Tests support product development, type testing and pre-shipment verification. Testing & Calibration Capability Overview Efficiency and load-response characterization across rated ranges. Harmonics and waveform quality analysis using power analyzers. Thermal cycling and protection device verification. Safety and dielectric tests per applicable electrical method families. Engagement Terms & Scheduling Service Format: In-lab testing with environmental conditioning where required. Turnaround Time: Typically 5â10 working days depending on test complexity. Sample Requirement: Fully assembled units with input/output connections and rated load specifications. Pricing Basis: Per-test and per-unit; safety and EMC testing may require extended scheduling.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Mobile SAR Testing for Handsets and Wireless Devices Mobile SAR testing measures radiofrequency energy absorption from handsets and wearable wireless devices to ensure compliance with human exposure limits. The laboratory service provides test setups and measurement procedures that quantify Specific Absorption Rate (SAR) under representative usage conditions for procurement and certification workflows. Testing & Calibration Capability Overview Applicable standards and measurement protocols for SAR assessment. Measurement equipment: SAR phantom models, probe systems and network analyzers. Test conditions: body-worn and head models across multiple frequency bands. Reporting: measured SAR values, scan maps and compliance verdicts aligned to applicable exposure limits. Sample handling: device firmware state, power control and positioning logs are recorded. Engagement Terms & Scheduling Service Format: In-lab SAR measurement with pre-test setup verification and firmware control. Turnaround Time: Typically 7â10 working days for full-band SAR suites; multi-band or repeat testing may require longer. Sample Requirement: Multiple production samples or engineering prototypes per measurement campaign. Pricing Basis: Pricing per campaign driven by number of frequency bands and positioning variants. Quality Assurance: Measurement uncertainty and calibration records accompany final reports.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
rf testing service for wireless and telecom devices This RF testing service supports product, RF engineering and regulatory teams validating transmitter power, spectrum occupancy, receiver sensitivity and coexistence for wireless devices. The service provides measured performance data for design tuning and approval workflows. Testing & Calibration Capability Overview Transmitter power and spectral mask verification using spectrum analyzers. Receiver sensitivity and selectivity testing with signal generators and shielded enclosures. OTA and conducted measurements for antenna and RF front-end evaluation. EMI/EMC pre-compliance assessments to anticipate certification risks. Engagement Terms & Scheduling Service Format: In-lab RF test chambers and conducted test setups. Turnaround Time: Typical RF characterization 3â7 working days; full compliance campaigns require scheduling. Sample Requirement: Prototype or production units with power and interface access. Pricing Basis: Per-test parameter, chamber time and measurement complexity.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
medical device testing service for regulatory compliance This medical device testing service helps regulatory, R&D and QA teams validate device safety and performance against applicable test methods. The service focuses on functional performance, biocompatibility screening and documentation needed for regulatory submissions and internal risk mitigation. Scope of Testing, Calibration & Accreditation Functional performance tests, electrical safety checks and environmental conditioning tests. Biocompatibility screening and material analysis where applicable to device contact components. Environmental and accelerated ageing tests to assess lifecycle behaviour. Traceable reporting with method references and clear pass/fail criteria. Turnaround Time & Commercial Terms Service Format: In-lab testing with scoped support for regulatory dossier preparation. Turnaround Time: Typical single-parameter tests 5â10 working days; combined test programs require scheduling. Sample Requirement: Representative units and material samples; packaging and handling instructions must be followed. Pricing Basis: Priced per parameter and by the number of samples tested; method complexity affects cost.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
plastic product testing service for packaging and OEM goods This plastic testing service is for packaging, quality and product teams validating polymer performance and regulatory fit. Tests include tensile and impact properties, barrier and permeability tests, chemical migration and aging studies to ensure fit-for-purpose behavior. Testing & Calibration Capability Overview Mechanical testing: tensile, flexural and impact assessments. Chemical resistance and migration screening for food-contact applications. Barrier and permeability testing for packaging performance. Aging and environmental stress tests to assess lifecycle behaviour. Engagement Terms & Scheduling Service Format: In-lab product and material testing with sample preparation guidance. Turnaround Time: Typically 5â10 working days depending on the test suite. Sample Requirement: Representative parts or film samples; number depends on test matrix. Pricing Basis: Per-test and per-sample; migration and chemical analyses priced separately.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
pump and motor testing service for water supply products This pump and motor testing service supports water utilities, OEMs and project engineers with performance validation, hydraulic curve generation and endurance testing. Results inform selection, system design and acceptance testing for supply projects. Testing & Calibration Capability Overview Hydraulic performance testing across duty points with flow and head measurement. Motor electrical efficiency, vibration and alignment checks. Endurance and cavitation susceptibility assessments. Reporting with characteristic curves and operational recommendations. Engagement Terms & Scheduling Service Format: In-lab and test-rig evaluation; mobile test rigs for on-site acceptance where feasible. Turnaround Time: Typically 5â14 working days depending on duty-cycle testing required. Sample Requirement: Fully assembled pump units with motor coupling and connection points. Pricing Basis: Per-test program and duration; on-site testing carries travel and rig fees.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
solid fuel testing service for petroleum, coal & coke This solid fuel testing service assists procurement, process and energy teams with fuel characterisation for combustion performance and emissions planning. Tests include calorific value, proximate and ultimate analysis, ash fusion and sulfur content to guide fuel selection and burner tuning. Testing & Calibration Capability Overview Gross and net calorific value by bomb calorimetry. Proximate and ultimate analysis for moisture, volatile matter, fixed carbon and sulfur. Ash characterization and fusion point analysis for slagging predictions. Reporting with method references and implications for combustion systems. Engagement Terms & Scheduling Service Format: In-lab analysis with sample preparation per fuel type. Turnaround Time: Typically 3â7 working days for standard test packages. Sample Requirement: Representative lot samples following standard sampling protocols. Pricing Basis: Per-parameter and per-sample; composite fuel packages offered for procurement assessments.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
metal and alloy testing service for engineering materials This metal and alloy testing service supports metallurgical engineers, procurement and QA teams evaluating raw materials and finished parts. The service covers tensile and hardness testing, chemical composition by spectrometry, microstructure analysis and failure investigation. Testing & Calibration Capability Overview Tensile, yield and elongation tests on universal testing machines. Hardness testing (Rockwell, Vickers) and impact toughness testing. Optical and SEM metallography for grain structure and inclusion analysis. Chemical analysis by OES or XRF for alloy verification. Engagement Terms & Scheduling Service Format: In-lab testing for material certification and failure analysis. Turnaround Time: Typical mechanical test battery 4â10 working days. Sample Requirement: Representative specimens or coupons as per test standard. Pricing Basis: Per-test and per-sample; microstructure and advanced analysis priced separately.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
wire and cable testing service for electrical products Wire and cable testing services for procurement teams validating conductor integrity, insulation resistance and performance under environmental stress. The service supports material acceptance and supplier qualification programs. What This Service Covers Tests include conductor resistance, insulation resistance, dielectric strength and elongation. Instrumentation: VLF testers, hipot, tensile testers and thermal chambers. Products covered: single-core, multi-core, shielded and instrument cables. Deliverables: Traceable test reports and method annexes. Service Format & Turnaround Service Format: In-lab sample testing with optional on-site sampling. Turnaround Time: Typically 5â9 working days depending on tests. Sample Requirement: Representative sample lengths as per method; usually 2â3 samples. Pricing Basis: Priced per test suite and sample length/volume.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
food & agriculture testing service for export quality assurance Microbiological and chemical testing for food and agricultural products to support export readiness and procurement quality checks. The service verifies contaminants, pesticide residues and compositional parameters relevant to importing markets. Scope of Testing, Calibration & Accreditation Analyses include pesticide residue screening, heavy metal testing and microbiological assays. Instrumentation: GC-MS, HPLC, ICP-OES and microbiology lab setups. Samples: grains, spices, processed food and agricultural produce. Deliverables: Traceable COA and method annex for export documentation. Turnaround Time & Commercial Terms Service Format: In-lab testing and sample handling per export documentation needs. Turnaround Time: Typically 5â10 working days for most chemical and microbiological tests. Sample Requirement: Generally 2â3 representative samples per lot for a complete panel. Pricing Basis: Priced per parameter set, sample matrix and required documentation.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
environmental climate testing service for equipment reliability Chamber-based environmental testing to validate equipment performance under temperature, humidity and vibration stresses. The service supports product validation, reliability engineering and vendor qualification activities. What This Service Covers Thermal cycling, humidity soak, vibration and combined-environment tests. Instrumentation: thermal/humidity chambers, vibration shakers and environmental simulators. Products covered: electronic assemblies, control panels and packaged equipment. Deliverables: Environmental test report with observed failure modes and recommendations. Service Format & Turnaround Service Format: In-lab chamber testing and combined-environment simulations. Turnaround Time: Typically 7â14 working days depending on cycle length and conditioning time. Sample Requirement: 1â3 units based on test severity and instrumentation constraints. Pricing Basis: Priced by cycle duration, environmental severity and instrumentation use.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
wiring accessories testing service for electrical components Testing services for wiring accessories aimed at procurement and QA teams validating switches, sockets and connectors. The service focuses on contact resistance, dielectric strength and mechanical life testing for component acceptance. Testing & Calibration Capability Overview Applicable tests: dielectric withstand, contact resistance, mechanical endurance and flammability. Instrumentation: hipot testers, contact resistance meters, endurance cycling rigs and UL/IEC-style test jigs. Products covered: switches, sockets, plugs, connectors and modular accessories. Deliverables: Method-referenced test report and failure analysis. Engagement Terms & Scheduling Service Format: In-lab component and sample testing. Turnaround Time: Typically 5â8 working days for standard electrical tests. Sample Requirement: Representative sample sets, commonly 5â10 pieces for endurance testing. Pricing Basis: Priced by test matrix and sample volume.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
refractory testing service for industrial materials This refractory testing service supports QA/QC teams and material engineers evaluating high-temperature linings, castables and bricks used in industrial furnaces. The scope covers chemical composition, high-temperature strength, thermal spalling, bulk density and apparent porosity to inform selection and failure analysis. Scope of Testing, Calibration & Accreditation Chemical analysis by XRF and wet chemistry for phase and oxide composition. High-temperature compressive and modulus tests to relevant IS/ASTM methods. Thermal shock and spalling evaluation using controlled heating cycles. Density, porosity and water absorption per standard volumetric methods. Traceable reporting with measurement uncertainty statements and method references. Turnaround Time & Commercial Terms Service Format: In-lab testing with limited on-site sampling and inspection where required. Turnaround Time: Typically 5â7 working days for standard suites. Complex type testing may require longer. Sample Requirement: Representative samples or cores; typical 2â5 specimens per test battery. Pricing Basis: Priced per test parameter and sample set; complexity and TAT affect costing.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
energy meter testing service for smart meter suppliers Functional and accuracy testing for energy meters and smart metering devices used by meter manufacturers, utilities and procurement teams. The service verifies measurement accuracy, communication integrity and endurance under electrical stress. What This Service Covers Tests include accuracy across load points, transient response, and communication protocol verification. Instrumentation: reference meter standards, programmable load banks and protocol analyzers. Products covered: single-phase and three-phase meters, smart metering modules. Deliverables: Accuracy report with calibration traceability and test logs. Service Format & Turnaround Service Format: In-lab bench testing with protocol verification. Turnaround Time: Typically 7â12 working days depending on test complexity. Sample Requirement: 1â3 units per model for accuracy and endurance testing. Pricing Basis: Priced by accuracy class tests, communication validation and endurance cycles.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
gas appliance testing service for stoves, cookers and heaters Safety and performance testing for LPG and gas-fired appliances used by product engineers and compliance officers. The service evaluates leakage, combustion performance and pressure safety for market entry and vendor qualification. Service Scope & Accreditation Details Tests include leakage, pressure integrity, burner performance and combustion analysis. Instrumentation: gas analyzers, pressure rigs and burner emission measurement equipment. Products covered: gas stoves, pressure cookers with pressure relief mechanisms, and LPG water heaters. Deliverables: Safety report with recommended corrective actions. Booking & Turnaround Details Service Format: In-lab testing and on-site inspection where required. Turnaround Time: Typically 5â9 working days depending on test scope. Sample Requirement: 1â3 units per model for safety and performance verification. Pricing Basis: Priced per test matrix and on-site effort if applicable.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
instrument calibration service for measuring equipment This calibration service addresses manufacturing QA, maintenance and instrumentation teams that require traceable calibration for pressure gauges, torque wrenches, electrical testers and dimensional gauges. The service establishes measurement traceability and quantifies uncertainty to support audits and in-house measurement programs. Testing & Calibration Capability Overview Calibration ranges for pressure, torque, temperature, and electrical parameters with traceable standards. On-site calibration options for installed instruments and in-lab calibration for higher-accuracy work. Uncertainty of measurement statements and calibration certificates suitable for QA records. Support for scheduled calibration programs and recall reminders. Engagement Terms & Scheduling Service Format: In-lab and on-site calibration, scheduled site visits for multi-instrument programs. Turnaround Time: Typically 3â7 working days depending on scope and instrument class. Sample/Equipment Requirement: Instruments with identification and maintenance history where available. Pricing Basis: Priced per instrument class, range and calibration points; additional charges for on-site travel and certification printing.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
fire extinguisher testing service for safety equipment Testing and inspection services for portable fire extinguishers and safety systems used by safety officers and procurement teams. The service validates pressure integrity, discharge performance and refill readiness. What This Service Covers Pressure testing, discharge performance, agent analysis and leak checks. Instrumentation: hydrostatic rigs, flow measurement setups and pressure gauges. Products covered: dry chemical, CO2 and foam extinguishers and refillable cylinders. Deliverables: Test report with observed performance and recommended servicing actions. Booking & Turnaround Details Service Format: In-lab performance testing and on-site inspection as required. Turnaround Time: Typically 5â9 working days depending on sample volume and tests. Sample Requirement: Usually 1â3 units per model for performance verification. Pricing Basis: Priced per unit and test matrix including agent analysis and pressure testing.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
electrical appliance safety testing for consumer and industrial products Third-party safety testing for electrical appliances to validate compliance with national and international safety standards. The service supports procurement, vendor qualification and pre-shipment checks. Service Scope & Accreditation Details Electrical safety tests: earth continuity, insulation resistance, leakage current and overload protection. Functional tests: cycle endurance, temperature rise and performance verification. Instrumentation: hipot testers, thermal chambers, programmable load banks. Deliverables: Method-referenced test report and corrective action notes. Booking & Turnaround Details Service Format: In-lab type testing and model evaluation. Turnaround Time: Typically 6â10 working days depending on tests requested. Sample Requirement: One model sample for type testing; additional units for endurance assessment. Pricing Basis: Priced per model and test matrix complexity.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
chemical testing service for industrial products This NABL-accredited chemical testing service covers industrial product quality verification and export compliance testing. The service addresses compositional analysis, contaminant screening and export-readiness checks for procurement and QA teams. Scope of Testing, Calibration & Accreditation Applicable methods: wet chemistry assays, GC, HPLC, ICP-OES where relevant. Accreditation: NABL scope and ISO/IEC 17025 methodology applied to analytical methods. Sample types accepted: bulk product, raw inputs and packaged consignments. Deliverables: Traceable test report with uncertainty statement and method references. Turnaround Time & Commercial Terms Service Format: In-lab testing and limited on-site sample collection. Turnaround Time: Typically 5â7 working days for standard single-parameter tests; multi-parameter panels take longer. Sample Requirement: Typically 2â3 representative samples per test battery. Pricing Basis: Priced per engagement by parameter count, matrix complexity, and TAT tier.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Solar PV Module Testing Service for Renewable Energy Projects This service evaluates electrical performance, environmental durability and degradation behaviour of PV modules. It is aimed at project developers, procurement teams and QA engineers validating modules for project deployment and warranty claims. Service Scope & Accreditation Details Applicable standards: module performance and reliability protocols for PV modules. Test types: IV curve performance, temperature cycling, damp heat and PID susceptibility. Instrumentation: solar simulators, environmental chambers and IV tracers. Deliverables: performance certificates, degradation reports and measurement data. Booking & Turnaround Details Service Format: In-lab module testing and conditional on-site sample intake. Turnaround Time: Typically 7-14 working days for standard electrical and environmental checks; extended for long-term degradation tests. Sample/Equipment Requirement: Provide representative modules with datasheets and serial traceability. Pricing Basis: Priced by test scope, module size and environmental sequences required. Payment Structure: Partial advance with balance on report delivery; contract options for recurring project evaluations.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
LED Luminaire Testing Service for Lighting Products This service provides photometric, electrical safety and functional testing for lamps and luminaires. It supports lighting designers, QA teams and compliance officers preparing regulatory filings and performance claims. Testing & Calibration Capability Overview Applicable standards: photometry, lumen maintenance, safety and thermal tests aligned to IS/IEC references. Sample types accepted: integrated luminaires, retrofit lamps and modules. Key measures: luminous flux, efficacy, color metrics, temperature rise and electrical safety. Deliverables: photometric files, test reports and safety verification documents. Engagement Terms & Scheduling Service Format: In-lab photometric measurements and safety testing. Turnaround Time: Typically 5-8 working days for standard photometric and safety batteries. Sample/Equipment Requirement: Submit representative production units with rated power and driver details. Pricing Basis: Priced by photometric scope, sample conditioning and number of parameters. Payment Structure: Standard partial advance with balance on report delivery.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
AYUSH Product Testing Service for Herbal & Wellness Brands This service offers microbiological, heavy metal and phytochemical testing tailored to AYUSH formulations and herbal products. It supports quality teams, regulatory compliance and product safety verification prior to market release. Testing & Calibration Capability Overview Analyses: heavy metals, pesticide residues, microbial limits and phytochemical profiling. Sample types accepted: finished formulations, raw botanicals, powders and extracts. Instrumentation: ICP-MS, HPLC, GC-MS and microbiology incubators. Deliverables: analytical reports with method notes and detection limits. Engagement Terms & Scheduling Service Format: In-lab analysis with sample receipt and chain-of-custody. Turnaround Time: Typically 5-10 working days for standard panels; extended for pesticide multi-residue screens. Sample/Equipment Requirement: Provide representative batches and labeling information. Pricing Basis: Priced per parameter panel and sample prep complexity. Payment Structure: Typical partial advance with balance on report delivery; contract programs for recurring QC are available.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Building Material Testing Service for Construction Products This service performs mechanical, structural and durability testing for construction materials. It supports engineers, project procurement and QA teams validating material fitness for purpose and safety requirements. Service Scope & Accreditation Details Test types: compressive strength, flexural tests, moisture and durability assessments. Sample types accepted: concrete cubes, masonry specimens, aggregates and finished components. Instrumentation: compression frames, flexural rigs and environmental conditioning chambers. Deliverables: test reports, strength curves and conformity notes. Booking & Turnaround Details Service Format: In-lab testing with options for on-site sampling and inspection. Turnaround Time: Typically 7-14 working days for standard structural tests; extended for long-duration durability trials. Sample/Equipment Requirement: Provide standard-cured specimens according to method guidance. Pricing Basis: Priced by test scope, specimen prep and conditioning requirements. Payment Structure: Partial advance with balance on report delivery; contract programs available for repeat testing needs.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
white goods testing service for consumer durable brands Third-party white goods testing for manufacturers and procurement teams focused on electrical safety and performance validation. The service supports model-level verification before market release and vendor qualification. Testing & Calibration Capability Overview Applicable tests: electrical safety, insulation, earth continuity, leakage, functional cycling. Instrumentation: hipot testers, leakage current meters, thermal chambers for endurance cycles. Products covered: refrigerators, washing machines, air conditioners and kitchen appliances. Deliverables: Test report with pass/fail matrix and corrective action notes. Engagement Terms & Scheduling Service Format: In-lab type testing and sample evaluation. Turnaround Time: Typically 7â10 working days for standard safety and performance tests. Sample Requirement: One production sample per model for type testing; additional samples for endurance cycles. Pricing Basis: Priced per model and test matrix, including endurance and environmental stress tests.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Automotive Component Testing Service for OEM Suppliers This service offers mechanical, material and durability testing tailored to automotive components. It supports OEM procurement, supplier qualification and product validation for safety-critical parts. Testing & Calibration Capability Overview Test types: tensile, fatigue, impact, dimensional and surface integrity checks. Sample types accepted: metal stampings, plastic injection parts, assemblies and fasteners. Instrumentation: tensile rigs, fatigue machines, impact testers and CMMs. Deliverables: test data, failure-mode analysis and conformity statements. Booking & Turnaround Details Service Format: In-lab mechanical testing and dimensional inspection. Turnaround Time: Typically 7-14 working days for standard mechanical batteries. Sample/Equipment Requirement: Supply representative parts and drawing references. Pricing Basis: Priced by test list, specimen prep and inspection effort. Payment Structure: Partial advance with balance on report delivery; contract options available.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Adhesives, Paints & Coatings Testing Service This service covers mechanical, chemical and durability testing for adhesives, tapes, paints and varnishes. It supports formulation teams, QC labs and procurement groups verifying adhesion, cure, weathering and chemical resistance. Testing & Calibration Capability Overview Applicable methods: adhesion tests, tensile-shear, peel strength and accelerated weathering protocols. Sample types accepted: adhesive films, coated panels, tape specimens and varnished substrates. Key measures: peel strength, shear, hardness, gloss and chemical resistance. Deliverables: data tables, failure-mode descriptions and durability summaries. Engagement Terms & Scheduling Service Format: In-lab specimen preparation and instrumented mechanical testing. Turnaround Time: Typically 5-10 working days for standard mechanical and chemical batteries. Sample/Equipment Requirement: Provide coated panels or tape strips per test standard dimensions. Pricing Basis: Priced by test list, specimen prep and accelerated weathering durations. Payment Structure: Partial advance with balance on report delivery; contract options for recurring QC programs.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
BIS CRS Testing Service for India Market Entry This service provides BIS CRS compliance testing focused on electronics and IT products seeking India market access. It defines the test scope required under the mandatory registration scheme and targets QA teams and compliance officers preparing regulatory submissions. Scope of Testing, Calibration & Accreditation Applicable standards: BIS CRS test methods and relevant IS/IEC clauses for safety and EMC. Sample types accepted: finished electronic devices, subassemblies and power adapters. Report deliverables: test report suitable for CRS registration submission. Test formats: type testing, sample batch verification and EMC screening where applicable. Turnaround Time & Commercial Terms Service Format: In-lab and coordinated on-site sample intake for physical devices. Turnaround Time: Typically 5-7 working days for standard test batteries; extended for type testing. Sample/Equipment Requirement: Submit representative production samples as per CRS sampling guidance. Pricing Basis: Priced per test scope and number of parameters; multi-parameter packages priced by engagement. Payment Structure: Typical engagement terms: partial advance, balance on report delivery.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Battery Testing Service for Cells, Modules & Power Products This service delivers safety, performance and endurance testing for lithium-ion and primary battery products. It supports QA teams, design engineers and compliance officers validating batteries for shipment, certification, and integration into equipment. Testing & Calibration Capability Overview Applicable standards: cell-level safety (IEC 62133-2), transport-related tests and performance protocols. Sample types accepted: cells, modules, battery packs and BMS-equipped assemblies. Key measures: cycle life, capacity, short-circuit, thermal stability and abuse tests. Output: detailed safety and performance reports with test data tables. Engagement Terms & Scheduling Service Format: In-lab testing with coordinated sample intake; on-site evaluations by appointment. Turnaround Time: Typically 7-10 working days for standard safety/performance batteries; endurance tests require longer windows. Sample/Equipment Requirement: Provide cells or assembled packs with BMS documentation and nominal ratings. Pricing Basis: Priced by test scope, cell chemistry and number of parameters; endurance testing quoted separately. Payment Structure: Partial advance with balance on report delivery; contract terms available for recurring programs.
Min. Order: 1 Unit
bharat test house private limited
GST
Sonipat, India
Service Provider , Professional Services, Brand Owner
Know MoreGST
Looking for “Bth”
Tell us your requirement & get the best quotes!
Reach Global
Suppliers
Accurate Business
Customized Services
For Buyers
Request for Quotation
