FIEO Registered
Our Products
Showing 1-24 of 40 products
Air & Water Pollution Testing Services for Industrial Compliance
Air and Water Pollution Testing Service for Industrial Compliance
This service provides emission and effluent testing to support environmental compliance and regulatory reporting. It helps EHS managers and compliance officers monitor pollutant loads and prepare submission-ready data for regulatory authorities.
Testing & Calibration Capability Overview
- Analyses: gas-phase emissions, particulate monitoring, wastewater chemical and biological parameters.
- Sample types accepted: stack gases, fugitive emissions samples, wastewater grab and composite samples.
- Instrumentation: GC, IC, TOC analyzers and spectrophotometers for parameter-specific analysis.
- Deliverables: analytical reports with detection limits, method notes and sampling chain-of-custody.
Turnaround & Commercial Terms
- Service Format: Field sampling support and in-lab analysis.
- Turnaround Time: Typically 5-10 working days for standard parameter sets; urgent tiers available.
- Sample/Equipment Requirement: Follow lab sampling protocol for containers and preservation.
- Pricing Basis: Priced per parameter panel and sampling logistics.
- Payment Structure: Standard partial advance with balance on report delivery.
Microbiological Testing Laboratory Services for Food, Pharma & Water
microbiological testing service for food, pharma and water
This microbiological testing service supports QA, regulatory and R&D teams assessing microbial contamination, sterility and hygiene in food, pharmaceutical products and water. Standard assays include total viable counts, pathogen detection and water quality indicator testing.
Testing & Calibration Capability Overview
- Culture-based enumeration and rapid molecular/pathogen detection options.
- Sterility and bioburden testing for pharmaceutical components where applicable.
- Water quality assays including coliforms, E. coli and heterotrophic plate counts.
- Method-referenced reporting aligned to client regulatory needs.
Engagement Terms & Scheduling
- Service Format: In-lab microbiological analysis with sample acceptance criteria and cold-chain handling.
- Turnaround Time: Typical 48–120 hours depending on method and organism.
- Sample Requirement: Preserved samples with chain-of-custody; volumes per method.
- Pricing Basis: Per-method and per-sample; rapid molecular assays priced separately.
Telecom Equipment Testing Laboratory Services for MTCTE Compliance
Telecom Equipment Testing for MTCTE Compliance
Telecom equipment testing services evaluate electrical, RF and EMC characteristics to meet MTCTE compliance requirements. This service is targeted at product teams, QA and regulatory functions that must demonstrate device conformance to telecom-specific safety and performance criteria before deployment.
Testing & Calibration Capability Overview
- RF performance testing, EMC/EMI assessments and electrical safety verification.
- Instrumentation: spectrum analyzers, network analyzers, and EMC chambers used for measurement.
- Test conditions: conducted and radiated emissions, immunity tests and protocol-level checks.
- Reporting: consolidated test reports with measured parameters and compliance commentary.
- Sample handling: detailed configuration and firmware state logs accompany each device test.
Booking & Turnaround Details
- Service Format: In-lab testing with pre-test setup and functional verification.
- Turnaround Time: Typically 7–12 working days for complete RF and EMC suites; extended for complex multi-band devices.
- Sample Requirement: Multiple units and a test-ready firmware image are recommended for full verification.
- Pricing Basis: Quoted per test suite, depending on bands and immunity levels required.
- Quality Assurance: Calibration logs and method statements are provided with reports.
Soaps & Detergents Testing Laboratory Services for FMCG Brands
Soaps & Detergents Testing for FMCG Brands
Soaps and detergents testing provides analytical and performance evaluation services for formulation, stability, and safety of consumer cleaning products. This testing service supports QA, regulatory and product development teams by quantifying active content, pH, foam performance, and stability under storage conditions.
Scope of Testing, Calibration & Accreditation
- Applicable tests: active matter content, pH, viscosity, foam stability, and microbial limits where required.
- Performance testing: wash-efficiency and fabric compatibility assessments per method protocols.
- Stability: accelerated ageing and storage-condition monitoring to predict shelf life.
- Reporting: batch-level results, method descriptions, and pass/fail criteria for product release.
- Traceability: sample logs and controlled method records for procurement audits.
Turnaround Time & Commercial Terms
- Service Format: In-lab sample testing with standard turnaround tiers.
- Turnaround Time: Typically 5–9 working days depending on test battery and microbial analyses.
- Sample Requirement: Representative production samples or retained lab samples per test method.
- Pricing Basis: Quoted per-parameter and by sample volume; consolidated packages for routine QC are available.
- Quality Assurance: Method statements and result variance reporting to support procurement decisions.
Mobile SAR Testing Laboratory Services for Handset Compliance
Mobile SAR Testing for Handsets and Wireless Devices
Mobile SAR testing measures radiofrequency energy absorption from handsets and wearable wireless devices to ensure compliance with human exposure limits. The laboratory service provides test setups and measurement procedures that quantify Specific Absorption Rate (SAR) under representative usage conditions for procurement and certification workflows.
Testing & Calibration Capability Overview
- Applicable standards and measurement protocols for SAR assessment.
- Measurement equipment: SAR phantom models, probe systems and network analyzers.
- Test conditions: body-worn and head models across multiple frequency bands.
- Reporting: measured SAR values, scan maps and compliance verdicts aligned to applicable exposure limits.
- Sample handling: device firmware state, power control and positioning logs are recorded.
Engagement Terms & Scheduling
- Service Format: In-lab SAR measurement with pre-test setup verification and firmware control.
- Turnaround Time: Typically 7–10 working days for full-band SAR suites; multi-band or repeat testing may require longer.
- Sample Requirement: Multiple production samples or engineering prototypes per measurement campaign.
- Pricing Basis: Pricing per campaign driven by number of frequency bands and positioning variants.
- Quality Assurance: Measurement uncertainty and calibration records accompany final reports.
Rubber & Polymer Testing Laboratory Services for Industrial Products
Rubber & Polymer Testing for Industrial Products
Rubber and polymer testing services evaluate mechanical, thermal and chemical performance of elastomers and polymer components. The laboratory service helps procurement, R&D and QA teams confirm material grade, validate supplier claims, and assess suitability for end-use conditions.
Testing & Calibration Capability Overview
- Tensile and elongation testing using universal testing machines for strength and elongation metrics.
- Hardness measurement (Shore A/D) and compression set evaluations per relevant test methods.
- Thermal analysis (DSC/TGA) for service temperature and degradation profiling.
- Chemical resistance and extraction testing for formulation validation.
- Detailed test reports with measured values and pass/fail guidance for procurement.
Engagement Terms & Scheduling
- Service Format: In-lab testing for samples and components; limited on-site sampling support available.
- Turnaround Time: Typically 5–8 working days for standard mechanical and thermal suites; extended timelines for complex combinational testing.
- Sample Requirement: Typical 2–5 specimens depending on test method; larger panels may be required for compositional analysis.
- Pricing Basis: Priced per-parameter and sample prep; combined test packages available for full qualification.
- Quality Assurance: Method statements and measurement uncertainty are provided to support procurement decisions.
RoHS & WEEE Compliance Testing Services for Electronics Manufacturers
RoHS & WEEE Compliance Testing for Electronics Manufacturers
RoHS & WEEE compliance testing is a targeted laboratory service that verifies restricted substance limits and product marking obligations for electronic assemblies and finished devices. The service focuses on heavy metals, phthalates and other restricted substances defined by RoHS and WEEE regimes and maps test results to regulatory thresholds used by product compliance and procurement teams.
Scope of Testing, Calibration & Accreditation
- Applicable Standards: RoHS test methods and referenced EN/IEC procedures where relevant.
- Test Methods: Chemical screening and instrumental analysis such as ICP-OES or ICP-MS for metal quantification.
- Sample Types: PCBs, assemblies, connectors, cable harnesses and plastic parts with surface finishes.
- Reporting: Detailed test reports with measured concentrations and pass/fail against regulatory limits.
- Traceability: Laboratory method logs and measurement logs for procurement review.
Turnaround Time & Commercial Terms
- Service Format: In-lab testing with sample submission; limited on-site sample pickup where available.
- Turnaround Time: Typical 5-7 working days for standard RoHS suites; extended schedules for multi-parameter or confirmatory testing.
- Sample Requirement: Representative samples or part numbers per test standard; typically 2–3 units or material coupons for full analysis.
- Pricing Basis: Pricing is per-scope and driven by number of parameters, sample prep, and method complexity.
- Payment Structure: Standard B2B engagement terms with partial advance and balance on report delivery.
RF Testing Laboratory Services for Wireless & Telecom Devices
rf testing service for wireless and telecom devices
This RF testing service supports product, RF engineering and regulatory teams validating transmitter power, spectrum occupancy, receiver sensitivity and coexistence for wireless devices. The service provides measured performance data for design tuning and approval workflows.
Testing & Calibration Capability Overview
- Transmitter power and spectral mask verification using spectrum analyzers.
- Receiver sensitivity and selectivity testing with signal generators and shielded enclosures.
- OTA and conducted measurements for antenna and RF front-end evaluation.
- EMI/EMC pre-compliance assessments to anticipate certification risks.
Engagement Terms & Scheduling
- Service Format: In-lab RF test chambers and conducted test setups.
- Turnaround Time: Typical RF characterization 3–7 working days; full compliance campaigns require scheduling.
- Sample Requirement: Prototype or production units with power and interface access.
- Pricing Basis: Per-test parameter, chamber time and measurement complexity.
Pump & Motor Testing Laboratory Services for Water Supply Products
pump and motor testing service for water supply products
This pump and motor testing service supports water utilities, OEMs and project engineers with performance validation, hydraulic curve generation and endurance testing. Results inform selection, system design and acceptance testing for supply projects.
Testing & Calibration Capability Overview
- Hydraulic performance testing across duty points with flow and head measurement.
- Motor electrical efficiency, vibration and alignment checks.
- Endurance and cavitation susceptibility assessments.
- Reporting with characteristic curves and operational recommendations.
Engagement Terms & Scheduling
- Service Format: In-lab and test-rig evaluation; mobile test rigs for on-site acceptance where feasible.
- Turnaround Time: Typically 5–14 working days depending on duty-cycle testing required.
- Sample Requirement: Fully assembled pump units with motor coupling and connection points.
- Pricing Basis: Per-test program and duration; on-site testing carries travel and rig fees.
Plastic Product Testing Laboratory Services for Packaging & OEM Goods
plastic product testing service for packaging and OEM goods
This plastic testing service is for packaging, quality and product teams validating polymer performance and regulatory fit. Tests include tensile and impact properties, barrier and permeability tests, chemical migration and aging studies to ensure fit-for-purpose behavior.
Testing & Calibration Capability Overview
- Mechanical testing: tensile, flexural and impact assessments.
- Chemical resistance and migration screening for food-contact applications.
- Barrier and permeability testing for packaging performance.
- Aging and environmental stress tests to assess lifecycle behaviour.
Engagement Terms & Scheduling
- Service Format: In-lab product and material testing with sample preparation guidance.
- Turnaround Time: Typically 5–10 working days depending on the test suite.
- Sample Requirement: Representative parts or film samples; number depends on test matrix.
- Pricing Basis: Per-test and per-sample; migration and chemical analyses priced separately.
Power Supply, Inverter & Stabilizer Testing Laboratory Services
power supply testing service for inverters & stabilizers
This power supply testing service helps electrical design, QA and procurement teams evaluate inverter efficiency, standby losses, waveform quality and voltage regulation under load. Tests support product development, type testing and pre-shipment verification.
Testing & Calibration Capability Overview
- Efficiency and load-response characterization across rated ranges.
- Harmonics and waveform quality analysis using power analyzers.
- Thermal cycling and protection device verification.
- Safety and dielectric tests per applicable electrical method families.
Engagement Terms & Scheduling
- Service Format: In-lab testing with environmental conditioning where required.
- Turnaround Time: Typically 5–10 working days depending on test complexity.
- Sample Requirement: Fully assembled units with input/output connections and rated load specifications.
- Pricing Basis: Per-test and per-unit; safety and EMC testing may require extended scheduling.
Petroleum, Coal, Coke & Solid Fuel Testing Laboratory Services
solid fuel testing service for petroleum, coal & coke
This solid fuel testing service assists procurement, process and energy teams with fuel characterisation for combustion performance and emissions planning. Tests include calorific value, proximate and ultimate analysis, ash fusion and sulfur content to guide fuel selection and burner tuning.
Testing & Calibration Capability Overview
- Gross and net calorific value by bomb calorimetry.
- Proximate and ultimate analysis for moisture, volatile matter, fixed carbon and sulfur.
- Ash characterization and fusion point analysis for slagging predictions.
- Reporting with method references and implications for combustion systems.
Engagement Terms & Scheduling
- Service Format: In-lab analysis with sample preparation per fuel type.
- Turnaround Time: Typically 3–7 working days for standard test packages.
- Sample Requirement: Representative lot samples following standard sampling protocols.
- Pricing Basis: Per-parameter and per-sample; composite fuel packages offered for procurement assessments.
Environmental Climate Testing Services for Equipment Reliability
environmental climate testing service for equipment reliability
Chamber-based environmental testing to validate equipment performance under temperature, humidity and vibration stresses. The service supports product validation, reliability engineering and vendor qualification activities.
What This Service Covers
- Thermal cycling, humidity soak, vibration and combined-environment tests.
- Instrumentation: thermal/humidity chambers, vibration shakers and environmental simulators.
- Products covered: electronic assemblies, control panels and packaged equipment.
- Deliverables: Environmental test report with observed failure modes and recommendations.
Service Format & Turnaround
- Service Format: In-lab chamber testing and combined-environment simulations.
- Turnaround Time: Typically 7–14 working days depending on cycle length and conditioning time.
- Sample Requirement: 1–3 units based on test severity and instrumentation constraints.
- Pricing Basis: Priced by cycle duration, environmental severity and instrumentation use.
Energy Meter Testing Laboratory Services for Smart Meter Suppliers
energy meter testing service for smart meter suppliers
Functional and accuracy testing for energy meters and smart metering devices used by meter manufacturers, utilities and procurement teams. The service verifies measurement accuracy, communication integrity and endurance under electrical stress.
What This Service Covers
- Tests include accuracy across load points, transient response, and communication protocol verification.
- Instrumentation: reference meter standards, programmable load banks and protocol analyzers.
- Products covered: single-phase and three-phase meters, smart metering modules.
- Deliverables: Accuracy report with calibration traceability and test logs.
Service Format & Turnaround
- Service Format: In-lab bench testing with protocol verification.
- Turnaround Time: Typically 7–12 working days depending on test complexity.
- Sample Requirement: 1–3 units per model for accuracy and endurance testing.
- Pricing Basis: Priced by accuracy class tests, communication validation and endurance cycles.
Wire and Cable Testing Laboratory Services for Electrical Products
wire and cable testing service for electrical products
Wire and cable testing services for procurement teams validating conductor integrity, insulation resistance and performance under environmental stress. The service supports material acceptance and supplier qualification programs.
What This Service Covers
- Tests include conductor resistance, insulation resistance, dielectric strength and elongation.
- Instrumentation: VLF testers, hipot, tensile testers and thermal chambers.
- Products covered: single-core, multi-core, shielded and instrument cables.
- Deliverables: Traceable test reports and method annexes.
Service Format & Turnaround
- Service Format: In-lab sample testing with optional on-site sampling.
- Turnaround Time: Typically 5–9 working days depending on tests.
- Sample Requirement: Representative sample lengths as per method; usually 2–3 samples.
- Pricing Basis: Priced per test suite and sample length/volume.
Electrical Appliance Testing Laboratory Services for Safety Compliance
electrical appliance safety testing for consumer and industrial products
Third-party safety testing for electrical appliances to validate compliance with national and international safety standards. The service supports procurement, vendor qualification and pre-shipment checks.
Service Scope & Accreditation Details
- Electrical safety tests: earth continuity, insulation resistance, leakage current and overload protection.
- Functional tests: cycle endurance, temperature rise and performance verification.
- Instrumentation: hipot testers, thermal chambers, programmable load banks.
- Deliverables: Method-referenced test report and corrective action notes.
Booking & Turnaround Details
- Service Format: In-lab type testing and model evaluation.
- Turnaround Time: Typically 6–10 working days depending on tests requested.
- Sample Requirement: One model sample for type testing; additional units for endurance assessment.
- Pricing Basis: Priced per model and test matrix complexity.
Electrical Components Testing Laboratory Services for Wiring Accessories
wiring accessories testing service for electrical components
Testing services for wiring accessories aimed at procurement and QA teams validating switches, sockets and connectors. The service focuses on contact resistance, dielectric strength and mechanical life testing for component acceptance.
Testing & Calibration Capability Overview
- Applicable tests: dielectric withstand, contact resistance, mechanical endurance and flammability.
- Instrumentation: hipot testers, contact resistance meters, endurance cycling rigs and UL/IEC-style test jigs.
- Products covered: switches, sockets, plugs, connectors and modular accessories.
- Deliverables: Method-referenced test report and failure analysis.
Engagement Terms & Scheduling
- Service Format: In-lab component and sample testing.
- Turnaround Time: Typically 5–8 working days for standard electrical tests.
- Sample Requirement: Representative sample sets, commonly 5–10 pieces for endurance testing.
- Pricing Basis: Priced by test matrix and sample volume.
White Goods Testing Laboratory Services for Consumer Durable Brands
white goods testing service for consumer durable brands
Third-party white goods testing for manufacturers and procurement teams focused on electrical safety and performance validation. The service supports model-level verification before market release and vendor qualification.
Testing & Calibration Capability Overview
- Applicable tests: electrical safety, insulation, earth continuity, leakage, functional cycling.
- Instrumentation: hipot testers, leakage current meters, thermal chambers for endurance cycles.
- Products covered: refrigerators, washing machines, air conditioners and kitchen appliances.
- Deliverables: Test report with pass/fail matrix and corrective action notes.
Engagement Terms & Scheduling
- Service Format: In-lab type testing and sample evaluation.
- Turnaround Time: Typically 7–10 working days for standard safety and performance tests.
- Sample Requirement: One production sample per model for type testing; additional samples for endurance cycles.
- Pricing Basis: Priced per model and test matrix, including endurance and environmental stress tests.
Chemical Testing Laboratory Services for Industrial Products & Exports
chemical testing service for industrial products
This NABL-accredited chemical testing service covers industrial product quality verification and export compliance testing. The service addresses compositional analysis, contaminant screening and export-readiness checks for procurement and QA teams.
Scope of Testing, Calibration & Accreditation
- Applicable methods: wet chemistry assays, GC, HPLC, ICP-OES where relevant.
- Accreditation: NABL scope and ISO/IEC 17025 methodology applied to analytical methods.
- Sample types accepted: bulk product, raw inputs and packaged consignments.
- Deliverables: Traceable test report with uncertainty statement and method references.
Turnaround Time & Commercial Terms
- Service Format: In-lab testing and limited on-site sample collection.
- Turnaround Time: Typically 5–7 working days for standard single-parameter tests; multi-parameter panels take longer.
- Sample Requirement: Typically 2–3 representative samples per test battery.
- Pricing Basis: Priced per engagement by parameter count, matrix complexity, and TAT tier.
Building Material Testing Laboratory Services for Construction Products
Building Material Testing Service for Construction Products
This service performs mechanical, structural and durability testing for construction materials. It supports engineers, project procurement and QA teams validating material fitness for purpose and safety requirements.
Service Scope & Accreditation Details
- Test types: compressive strength, flexural tests, moisture and durability assessments.
- Sample types accepted: concrete cubes, masonry specimens, aggregates and finished components.
- Instrumentation: compression frames, flexural rigs and environmental conditioning chambers.
- Deliverables: test reports, strength curves and conformity notes.
Booking & Turnaround Details
- Service Format: In-lab testing with options for on-site sampling and inspection.
- Turnaround Time: Typically 7-14 working days for standard structural tests; extended for long-duration durability trials.
- Sample/Equipment Requirement: Provide standard-cured specimens according to method guidance.
- Pricing Basis: Priced by test scope, specimen prep and conditioning requirements.
- Payment Structure: Partial advance with balance on report delivery; contract programs available for repeat testing needs.
AYUSH Product Testing Laboratory Services for Herbal & Wellness Brands
AYUSH Product Testing Service for Herbal & Wellness Brands
This service offers microbiological, heavy metal and phytochemical testing tailored to AYUSH formulations and herbal products. It supports quality teams, regulatory compliance and product safety verification prior to market release.
Testing & Calibration Capability Overview
- Analyses: heavy metals, pesticide residues, microbial limits and phytochemical profiling.
- Sample types accepted: finished formulations, raw botanicals, powders and extracts.
- Instrumentation: ICP-MS, HPLC, GC-MS and microbiology incubators.
- Deliverables: analytical reports with method notes and detection limits.
Engagement Terms & Scheduling
- Service Format: In-lab analysis with sample receipt and chain-of-custody.
- Turnaround Time: Typically 5-10 working days for standard panels; extended for pesticide multi-residue screens.
- Sample/Equipment Requirement: Provide representative batches and labeling information.
- Pricing Basis: Priced per parameter panel and sample prep complexity.
- Payment Structure: Typical partial advance with balance on report delivery; contract programs for recurring QC are available.
Automobile Component Testing Laboratory Services for OEM Suppliers
Automotive Component Testing Service for OEM Suppliers
This service offers mechanical, material and durability testing tailored to automotive components. It supports OEM procurement, supplier qualification and product validation for safety-critical parts.
Testing & Calibration Capability Overview
- Test types: tensile, fatigue, impact, dimensional and surface integrity checks.
- Sample types accepted: metal stampings, plastic injection parts, assemblies and fasteners.
- Instrumentation: tensile rigs, fatigue machines, impact testers and CMMs.
- Deliverables: test data, failure-mode analysis and conformity statements.
Booking & Turnaround Details
- Service Format: In-lab mechanical testing and dimensional inspection.
- Turnaround Time: Typically 7-14 working days for standard mechanical batteries.
- Sample/Equipment Requirement: Supply representative parts and drawing references.
- Pricing Basis: Priced by test list, specimen prep and inspection effort.
- Payment Structure: Partial advance with balance on report delivery; contract options available.
Adhesives, Tapes, Paints & Varnishes Testing Laboratory Services
Adhesives, Paints & Coatings Testing Service
This service covers mechanical, chemical and durability testing for adhesives, tapes, paints and varnishes. It supports formulation teams, QC labs and procurement groups verifying adhesion, cure, weathering and chemical resistance.
Testing & Calibration Capability Overview
- Applicable methods: adhesion tests, tensile-shear, peel strength and accelerated weathering protocols.
- Sample types accepted: adhesive films, coated panels, tape specimens and varnished substrates.
- Key measures: peel strength, shear, hardness, gloss and chemical resistance.
- Deliverables: data tables, failure-mode descriptions and durability summaries.
Engagement Terms & Scheduling
- Service Format: In-lab specimen preparation and instrumented mechanical testing.
- Turnaround Time: Typically 5-10 working days for standard mechanical and chemical batteries.
- Sample/Equipment Requirement: Provide coated panels or tape strips per test standard dimensions.
- Pricing Basis: Priced by test list, specimen prep and accelerated weathering durations.
- Payment Structure: Partial advance with balance on report delivery; contract options for recurring QC programs.
Solar PV Module Testing Laboratory Services for Renewable Energy Products
Solar PV Module Testing Service for Renewable Energy Projects
This service evaluates electrical performance, environmental durability and degradation behaviour of PV modules. It is aimed at project developers, procurement teams and QA engineers validating modules for project deployment and warranty claims.
Service Scope & Accreditation Details
- Applicable standards: module performance and reliability protocols for PV modules.
- Test types: IV curve performance, temperature cycling, damp heat and PID susceptibility.
- Instrumentation: solar simulators, environmental chambers and IV tracers.
- Deliverables: performance certificates, degradation reports and measurement data.
Booking & Turnaround Details
- Service Format: In-lab module testing and conditional on-site sample intake.
- Turnaround Time: Typically 7-14 working days for standard electrical and environmental checks; extended for long-term degradation tests.
- Sample/Equipment Requirement: Provide representative modules with datasheets and serial traceability.
- Pricing Basis: Priced by test scope, module size and environmental sequences required.
- Payment Structure: Partial advance with balance on report delivery; contract options for recurring project evaluations.
GL Trustmark
