Sort By
Large capacity and constant running mode don't usually come easy, but that's the job here. A screw compressor and water-cooled condenser move heat out of water steadily, even loaded to the brim. Aquatech Plus water cooled screw chillers combine a screw compressor with a water-cooled condenser for large-capacity, constant-running cooling, offering variable capacity operation and an eco-friendly refrigerant for plastics, pharmaceuticals, chemical processing, and food and beverage production. Large capacity, constant running modeScrew compressor with water-cooled condenser transfers heat out of waterSteady performance under full loadVariable capacity operationUses an eco-friendly refrigerant Aquatech Plus, water cooled screw chiller, screw compressor, variable capacity, eco-friendly refrigerant
Min. Order: 1 Unit
GST
Water treatment is a hassle a lot of sites would rather skip, and this chiller is built around that. A screw compressor and fin-and-tube condenser handle medium to large loads with no cooling tower. Aquatech Plus air cooled screw chillers deliver chilled water without a cooling tower, using a screw compressor and fin-and-tube condenser with fans in a closed fluid loop, suited to medium to large cooling loads in commercial buildings, hospitals, data centres, hotels, and industrial facilities. Delivers chilled water without a cooling towerScrew compressor compresses refrigerant efficientlyFin-and-tube condenser with fans rejects heat to ambient airSuited to medium to large cooling loadsUsed in commercial buildings, hospitals, data centres, hotels, industrial facilities Aquatech Plus, air cooled screw chiller, screw compressor, no cooling tower, medium-to-large load
Min. Order: 1 Unit
GST
If a cooling tower or extra water line isn't on the table, this is the chiller you look at. It pulls heat out of water and sends it straight into the surrounding air, closed-loop, no external water source needed. Aquatech Plus air cooled water chillers extract heat from water and transfer it to the surrounding air via a closed-loop refrigeration cycle using a compressor, condenser and fans, evaporator, and expansion valve, requiring no cooling tower and suiting small to medium cooling loads. Extracts heat from water, transfers it to surrounding airClosed-loop refrigeration cycle with compressor, condenser and fans, evaporator, expansion valveNo cooling tower or external water source requiredSuited to small to medium-sized cooling loadsUsed in industrial processes, HVAC, medical equipment, and laser machinery Aquatech Plus, air cooled water chiller, closed-loop, no cooling tower required
Min. Order: 1 Unit
GST
Screw compressors don't just handle full load well; they handle the in-between too. Aquatech Plus screw chillers are built for that kind of continuous, varying-demand duty across large plants and installations. Aquatech Plus screw chillers use screw compressors for smooth compression and consistent performance at half and full load, built for continuous operation across large industrial plants, district cooling, pharmaceuticals, plastics processing, chemical industries, and large HVAC installations. Uses screw compressors for smooth, consistent compressionReliable at half-load and full-load operationDesigned for continuous, always-on operationBuyer considerations: load modulation, compressor life, oil control, temperature span, serviceabilityUsed in large plants, district cooling, pharmaceuticals, plastics, chemicals, large HVAC Aquatech Plus, screw chiller, screw compressor, continuous operation, industrial cooling
Min. Order: 1 Unit
GST
No cooling tower, no water main to tap into, just a compact air chiller doing the job. Aquatech Plus units dissipate heat through finned condensers and fans, holding a precise temperature wherever they're placed. Aquatech Plus air chillers regulate temperature precisely without external water infrastructure, using finned air-cooled condensers and high-performance fans, in a small, modular build with digital controllers, safety interlocks, overload protection, and weatherproof enclosures for outdoor use. Operates without external water infrastructureDissipates heat via finned air-cooled condensers and high-performance fansSmall, modular constructionDigital controllers, safety interlocks, and overload protection featuredWeatherproof enclosures suited to outdoor installation Aquatech Plus, air chiller, air-cooled, modular, no water infrastructure required
Min. Order: 1 Unit
GST
Below-zero cooling needs fluid that won't freeze, and a compressor built to handle it precisely. Aquatech Plus delivers both, with air-cooled condensers so no cooling tower is needed. Aquatech Plus air cooled glycol screw chillers supply a small, accurate volume of chilled glycol-water fluid using a screw compressor and air-cooled condensers, suited to low and below-zero temperature processes in food processing, pharmaceuticals, plastics, and chemical industries, without needing a cooling tower. Supplies a small, accurate volume of chilled glycol-water fluidScrew compressor compresses refrigerant efficientlyAir-cooled condensers with fans; no cooling tower requiredSuited to low and below-zero temperature processesUsed in food processing, pharmaceuticals, plastics, chemical industries Aquatech Plus, air cooled glycol screw chiller, screw compressor, below-zero capable, no cooling tower
Min. Order: 1 Unit
GST
A water-cooled system needs a tower and a water source. This one doesn't. Aquatech Plus air cooled chillers push heat straight into the surrounding air through a closed loop, keeping the footprint small. Aquatech Plus air cooled chillers extract heat from water or another fluid directly to the surrounding air through a closed loop of compressor, condenser with fans, evaporator, and expansion valve, removing the need for a cooling tower and suiting sites with limited water or space. Extracts heat from water or fluid to the surrounding airNo cooling tower or extra water source requiredClosed-loop system: compressor, condenser with fans, evaporator, expansion valveSuited to limited water resources and limited spaceUsed in industrial processes, commercial HVAC, medical/laser equipment, and food processing Aquatech Plus, air cooled chiller, closed-loop, no cooling tower required
Min. Order: 1 Unit
GST
Heat has to go somewhere in a working plant, and Aquatech Plus chillers are built to move it out reliably. Air-cooled or water-cooled, with a compressor matched to the load, they hold steady through production, lab, and processing environments. Aquatech Plus chillers are industrial cooling systems that remove heat from processes, equipment, or buildings by circulating cooled water or coolant, offered in air-cooled and water-cooled configurations from a few tons to large industrial loads, with scroll, screw, or centrifugal compressor options and durable heat-exchanger construction. Removes heat by circulating cooled water or coolantOffered in air-cooled and water-cooled configurationsCooling capacity spans a few tons to large industrial loadsCompatible with scroll, screw, or centrifugal compressorsUsed in production, laboratory, pharmaceutical, plastics/food processing, and data-centre settings Aquatech Plus, industrial chillers, air-cooled, water-cooled, scroll/screw/centrifugal compressor compatible
Min. Order: 1 Unit
GST
It freezes, usually. A glycol chiller doesn't. Aquatech Plus builds these around a water-glycol mixture that keeps working exactly where standard water chillers stop. Aquatech Plus glycol chillers use a water-glycol coolant mixture to prevent freezing and operate under sub-zero or cold process conditions where standard water chillers do not perform, serving breweries, beverage processing, pharmaceuticals, cold rooms, and chemical processing. Uses a water-glycol mixture as coolantPrevents freezing; works under sub-zero/cold conditionsPreferred where standard water chillers do not performBuyer considerations: glycol concentration, temperature range, pump capacity, insulation, control precisionUsed in breweries, beverage processing, pharmaceuticals, cold rooms, chemical processing Aquatech Plus, glycol chiller, water-glycol coolant, sub-zero capable, freeze protection
Min. Order: 1 Unit
GST
Noise and strain usually climb together as load increases, but not here. This chiller uses cooling-tower water to hold accurate temperature control while running smoothly, quietly, and continuously. Aquatech Plus water-cooled water chillers use cooling-tower water to absorb and transfer heat, delivering accurate temperature control via a powerful compressor, water-cooled condenser, and evaporator, with quiet operation, long life, and custom capacity for pharmaceuticals, food processing, and large-scale industrial use. Uses water in a cooling tower to absorb and transfer heatAdvanced, accurate temperature control across diverse processesPowerful compressor, water-cooled condenser, powerful evaporatorOperates smoothly and continuously under heavy loadsBenefits: quiet operation, long life, custom capacity Aquatech Plus, water cooled water chiller, cooling tower, custom capacity, quiet operation
Min. Order: 1 Unit
GST
What happens when a standard chiller doesn't fit the space or the load? Aquatech Plus builds custom process chillers around the operating conditions instead, with water-based or glycol-based circuits to match. Aquatech Plus custom process chillers are engineered to specific operating conditions, load changes, and space constraints, offered with water-based and glycol-based cooling circuits across a wide operating temperature range, built with tough materials and programmable controls for manufacturing, pharmaceutical, food and beverage, plastics, chemicals, and laboratory use. Engineered to specific operating conditions, load changes, and space constraintsAvailable with water-based and glycol-based cooling circuitsBuilt with tough materials and effective heat transfer systemsIncludes programmable control features custom-engineered configuration, water-based cooling circuit, glycol-based cooling circuit, programmable controls, tough construction
Min. Order: 1 Unit
GST
You need one system holding several processes to the same temperature, not several systems fighting each other. That's the centralised job water cooled chillers do, tying chiller, tower, and water loop together. Aquatech Plus water cooled chillers are centralised systems combining a chiller unit, cooling tower, and condenser water loop, serving facilities with multiple processes needing stable temperature control, with performance independent of outdoor air temperature and a reduced footprint for higher loads. Combines chiller unit, cooling tower, and condenser water loopServes facilities with multiple, stable-temperature processesOperation independent of outdoor air temperature changesServes higher heating/cooling loads with a reduced footprintUsed in large plants, business complexes, all-day industrial installations Aquatech Plus, water cooled chiller, centralised system, cooling tower, condenser water loop
Min. Order: 1 Unit
GST
Design, installation, commissioning, and support, held under one roof: that is what a turnkey cooling solution from Aquatech Plus covers, with several cooling components combined into a single coordinated system. Aquatech Plus turnkey cooling solutions combine planning and design, installation, commissioning, and subsequent support into one coordinated system under a single point of accountability, intended for factory plants, pharmaceutical facilities, food processing, data centres, chemical plants, and other infrastructure projects, whether new-build or upgrade. Covers the full cooling life cycle: design, installation, commissioning, and supportCombines several cooling components into one coordinated systemManaged under a single point of accountabilitySuited to both new facilities and facility upgrades turnkey project scope, single-point accountability, integrated multi-component system, existing-utility compatibility
Min. Order: 1 Unit
GST
Heavy load and sub-zero demand at the same time is where ordinary water chillers give up. A glycol-based coolant and screw compressor keep this one running, with water-cooled heat rejection for constant operation. Aquatech Plus water cooled glycol screw chillers combine a screw compressor with glycol-based coolant for uniform cooling under heavy load and sub-zero conditions, using water-cooled heat rejection for high energy efficiency and continuous operation across chemical, pharmaceutical, and food and beverage processes. Screw compressor with glycol-based coolantGlycol blend does not freeze; supports low/sub-zero demandsWater-cooled heat rejection for high energy efficiencyDesigned for continuous industrial operationUsed in chemical processing, pharmaceuticals, food and beverage, plastic processing Aquatech Plus, water cooled glycol screw chiller, screw compressor, sub-zero capable, water-cooled
Min. Order: 1 Unit
GST
Extended working periods, heavy loads, temperatures that can't drift. Aquatech Plus water-cooled glycol chillers are built for that kind of demand, with a glycol blend that keeps it from freezing along the way. Aquatech Plus water-cooled glycol chillers use a glycol blend to prevent freezing and maintain cold temperature over extended periods, with a water-cooled condenser sustaining heavy loads and adjustable temperature control for manufacturing, liquid processing, and temperature-controlled storage. Glycol blend prevents freezing, maintains cold temperature over extended periodsWater-cooled condenser sustains heavy loadsBuilt with trusted compressors and efficient heat exchangersAdjustable temperature controlUsed for manufacturing, liquid processing, temperature-controlled storage Aquatech Plus, water cooled glycol chiller, heavy load, adjustable temperature control
Min. Order: 1 Unit
GST
Some processes simply can't use water as the cooling medium. This chiller swaps in a glycol-water mixture instead, with air-cooled condensers so no cooling tower is needed. Aquatech Plus air cooled glycol chillers use a glycol-water mixture instead of water for low-temperature and freeze-protection needs, built with scroll or screw compressors, a durable heat exchanger, and microprocessor controls, requiring no cooling tower and functioning in cold or hot weather. Uses a glycol-water mixture instead of waterServes low-temperature and freeze-protection needsFunctions in cold or hot weatherAir-cooled condensers; no cooling tower requiredBuilt with scroll or screw compressors and microprocessor controls Aquatech Plus, air cooled glycol chiller, scroll/screw compressor, microprocessor controlled, no cooling tower
Min. Order: 1 Unit
GST
An average temperature over a shift isn't the same as a constant one, and process equipment knows the difference. Aquatech Plus water chillers circulate chilled water continuously to hold it steady. Aquatech Plus water chillers continuously circulate chilled water to control heat capacity and hold a constant temperature across industrial and commercial processes, designed for round-the-clock operation, efficient heat exchange, long operating life, and low energy consumption. Continuously circulates chilled water to absorb and transfer heatMaintains a constant water temperatureDesigned for round-the-clock operationEfficient heat exchange, long operating life, low energy consumptionUsed in process industries, plastic/packaging, pharmaceutical, and food processing plants, HVAC systems Aquatech Plus, water chiller, constant temperature, round-the-clock operation
Min. Order: 1 Unit
GST
Fixed on-off cycling wastes energy chasing loads that never stay still. An inverter-driven scroll compressor adjusts speed in real time instead, and that's the difference this chiller is built on. Aquatech Plus inverter scroll chillers use inverter-driven scroll compressors that automatically adjust speed to match real-time cooling requirements, delivering high temperature-regulation accuracy and flexibility to fluctuating loads across HVAC systems, laboratories, hospitals, and commercial buildings. Scroll compressors driven by invertersAutomatically adjusts speed to match real-time cooling requirementsHigh accuracy in temperature regulationFlexible to fluctuating load profilesUsed in HVAC systems, laboratories, hospitals, commercial buildings, process cooling facilities Aquatech Plus, inverter scroll chiller, inverter-driven compressor, variable load capable
Min. Order: 1 Unit
GST
Not eight hours, not a single shift, but twenty-four, day after day. That's the operating window this water chiller system is designed around, holding process water at a consistent temperature the whole time. Aquatech Plus water chiller systems extract unwanted heat from process water and pump chilled water to equipment needing controlled temperatures, designed to run on a 24-hour basis with consistent temperature control across manufacturing plants, processing industries, HVAC systems, and laboratories. Extracts unwanted heat from process waterPumps chilled water to equipment/machinery needing controlled temperatureMaintains a consistent cooling temperatureDesigned to run on a 24-hour basisUsed in manufacturing plants, processing industries, HVAC systems, laboratories, commercial facilities Aquatech Plus, water chiller system, 24-hour operation, consistent temperature control
Min. Order: 1 Unit
GST
One system does both jobs: Aquatech Plus cooling and heating solutions remove heat or add it, switching modes as the operation demands. Intelligent controls and safety protection carry the process through the change. Aquatech Plus cooling and heating solutions are dual-mode systems that both remove and add heat, switching between functions depending on operating needs, and are used across manufacturing, laboratory, pharmaceutical, HVAC, and food-processing settings where constant temperature monitoring matters. Performs both heat removal and heat addition within one systemSwitches between heating and cooling modes based on operating needUsed in manufacturing, laboratory, pharmaceutical, HVAC, and food-processing settingsBuilt with intelligent controls, safety protection, and balanced system design dual-mode heat removal and addition, mode-switching operation, intelligent controls, safety protection, balanced system design
Min. Order: 1 Unit
GST
Morning, noon, and evening rarely need the same cooling output. An inverter-based scroll compressor tracks that shift automatically, holding a constant temperature with minimum power waste. Aquatech Plus water cooled inverter scroll chillers use an inverter-based scroll compressor that automatically varies output to maintain constant temperatures with minimum power waste, paired with a water-cooled condenser, for process lines and controlled temperature areas prioritising consistency. Inverter-based scroll compressor automatically varies outputMaintains constant temperatures with minimum power wasteWater-cooled condenser enhances heat removalSimple controls, strong components, effective heat exchangeUsed in process lines, machine cooling systems, controlled temperature areas Aquatech Plus, water cooled inverter scroll chiller, inverter-based compressor, flexible cooling control
Min. Order: 1 Unit
GST
Loads that change by the hour need a compressor that changes with them. Aquatech Plus air cooled inverter scroll chillers do exactly that, with no cooling tower or extra water system to manage. Aquatech Plus air cooled inverter scroll chillers use inverter-controlled scroll compressors to assist power-saving and maintain constant temperature under changing loads, with an air-cooled system removing heat via condenser coils and fans, needing no cooling tower, for process cooling and production zones. Inverter-controlled scroll compressors adjust to cooling needAssists power-saving, ensures constant temperatureAir-cooled system with condenser coils and fansNo cooling tower or additional water system neededUsed in process cooling, production zones, machine cooling Aquatech Plus, air cooled inverter scroll chiller, compact, no cooling tower required
Min. Order: 1 Unit
GST
An office block, a hotel, a hospital wing: each zone draws on cooling differently, and Aquatech Plus commercial chillers are built to hold performance steady across all of them. Aquatech Plus commercial chillers deliver chilled water to air conditioning and comfort cooling across different building zones, designed to run under varying occupancy loads and ambient environments for offices, hotels, hospitals, and educational institutions. Delivers chilled water to zoned air conditioning and comfort coolingDesigned for different occupancy loads and ambient environmentsUsed in offices, hotels, hospitals, and educational institutionsBuilt for stable, long-lasting operation with manageable servicing zoned chilled-water delivery, variable-occupancy design, HVAC-infrastructure compatibility, long-lasting construction
Min. Order: 1 Unit
GST
A cooling tower on site, no water to spare, or waste heat to put to use, three different starting points, and Aquatech Plus builds an industrial water chiller for each of them. Aquatech Plus industrial water chillers circulate temperature-regulated water to control heat from industrial processes and machinery, offered in water-cooled, air-cooled, and absorption types, with a stated capacity of approximately 1-20 Ton (10-200+ kW per the parameter table) and refrigerant options from R410A to R290. Circulates temperature-regulated water to control industrial process heatAvailable in Water-Cooled, Air-Cooled, and Absorption typesCooling capacity stated as approximately 1-20 Ton (narrative) / 10-200+ kW (parameter table)Compressor types: screw, scroll, centrifugalRefrigerant options include R410A, R407C, R134a, R404A, R22, R32, R290 Aquatech Plus, industrial water chiller, water-cooled type, air-cooled type, absorption type, 1-20 Ton / 10-200+kW capacity, screw/scroll/centrifugal compressors
Min. Order: 1 Unit
GST
What happens to hydraulic oil after hours of continuous machine running? It heats up, and Aquatech Plus industrial oil cooling chillers are built to stop that heat from reaching pumps, motors, and bearings. Aquatech Plus industrial oil cooling chillers circulate chilled oil or use a heat exchange system to hold constant temperature during continuous machine operation, built with dependable compressors, effective heat exchangers, and simple control mechanisms for minimal power consumption in CNC machines, presses, and heavy-duty production equipment. Circulates chilled oil or uses a heat exchange system for hydraulic and lubrication oilDesigned for continuous machine operationBuilt with dependable compressors and effective heat exchangersDesigned for minimal power consumption hydraulic and lubrication oil cooling, continuous-operation design, dependable compressors, minimal power consumption
Min. Order: 1 Unit
GST
No catalogue sizing here: Aquatech Plus industrial process chillers are set to the heat load, duty cycle, and installation limits of your process, then factory-tested before dispatch. Aquatech Plus industrial process chillers are engineered per application rather than catalogue sizing, offered in air-cooled or water-cooled configurations with PLC or microprocessor control, a stated cooling capacity range of 5-500 and temperature control range of 5-30 (stability ±0.3), and pre-dispatch performance testing on every unit. Engineered per application heat load, duty cycle, and installation limitsAvailable in air-cooled or water-cooled configurationsPLC-controlled or microprocessor-controlled temperature adjustmentCooling capacity range stated as 5-500 (unit not specified in source)Pre-dispatch performance testing carried out on all systems Aquatech Plus, industrial process chiller, air-cooled configuration, water-cooled configuration, PLC/microprocessor control, scroll/screw/inverter-scroll compressors
Min. Order: 1 Unit
GST
What stops a chiller from icing up the moment it drops below freezing? A glycol circuit, and that is exactly what runs through every Aquatech Plus low temperature chiller. Aquatech Plus low temperature chillers use a glycol cooling circuit to reach sub-zero temperatures without ice formation or thermal shock, stated across a -40°C to +10°C operating range, 5-300 kW cooling capacity, and R404A/R507/R134a refrigerant options, factory-tested before service. Uses a glycol cooling circuit to prevent ice formation and thermal shockOperating temperature range stated as -40°C to +10°C (±0.3°C stability)Cooling capacity range stated as 5 kW to 300 kWGlycol concentration stated as 20%-50%Factory-tested for performance, safety, and stability before service Aquatech Plus, low temperature chiller, glycol cooling circuit, -40°C to +10°C range, 5-300kW capacity, R404A/R507/R134a refrigerants
Min. Order: 1 Unit
GST
A slow cool-down risks food quality and safety; a blast chiller from Aquatech Plus reduces the temperature of cooked or raw food fast, with every tray cooled equally. Aquatech Plus commercial blast chillers rapidly reduce the temperature of cooked or raw food, designed for high product loads with trays or containers receiving equal cooling, built with good insulation, air circulation, and accurate temperature regulation for commercial kitchens and food processing facilities. Rapidly reduces temperature of cooked or raw foodDesigned for high product loads with equal cooling across trays or containersBuilt with good insulation and accurate temperature regulationUsed in commercial kitchens, food processing plants, bakeries, and central kitchens rapid food-cooling function, equal-cooling tray/container design, insulated construction, accurate temperature regulation
Min. Order: 1 Unit
GST
A moulding line, a laser cutter, a CNC cell: each one needs its cooling matched to the process, not general comfort cooling, and that is exactly how Aquatech Plus builds this range. Aquatech Plus process and application chillers are engineered for the specific cooling requirements of a particular industrial process rather than general comfort cooling, with pump and flow arrangement, control logic, and fluid compatibility matched to the application, built to perform under constant loads and fast fluctuating heat conditions. Designed for specific industrial process requirements, not general comfort coolingPump and flow arrangement matched to the application fluidBuilt for constant loads and fast fluctuating heat conditionsUsed in plastics moulding, laser cutting, pharmaceuticals, chemical processing, food manufacturing, printing, and CNC machining process-specific cooling design, matched pump and flow arrangement, application-fluid compatibility, constant and fluctuating load capability
Min. Order: 1 Unit
GST
You choose the configuration, air-cooled, water-cooled, or process/glycol, and Aquatech Plus industrial chillers circulate cooled fluid in a closed loop to hold your process temperature steady, day and night. Aquatech Plus industrial chillers circulate cooled water or water-glycol fluid in a closed-loop vapor-compression cycle to extract heat from process equipment, offered in air-cooled, water-cooled, and process/glycol configurations with scroll, screw, or semi-hermetic compressors, R22-R410A refrigerant options, and a stated cooling capacity range of approximately 8-430 kW+. Operates on a vapor-compression refrigeration cycle in a closed loopAvailable in Air-Cooled, Water-Cooled, and Process & Glycol configurationsCooling capacity range stated as approximately 8 kW to 430 kW+ (varies by model)Compressor options: scroll, screw, semi-hermeticRefrigerant options: R22, R407C, R134a, R404A, R410ATypical chilled-water output temperature approximately 3-35°C Aquatech Plus, industrial chiller, air-cooled configuration, water-cooled configuration, process/glycol configuration, 8-430kW+ cooling capacity, scroll/screw/semi-hermetic compressors, R22-R410A refrigerants
Min. Order: 1 Unit
GST
A short weld barely notices heat build-up; a long run on a robotic line does. Aquatech Plus welding chillers keep torches, machines, and power sources at a safe temperature through both. Aquatech Plus welding chillers circulate chilled water or coolant to welding machines, torches, and power sources, keeping critical parts at a safe operating temperature during intensive and continuous welding, built with reliable cooling parts, effective heat exchangers, and simple controls. Circulates chilled water or coolant to welding machines, torches, and power sourcesDesigned for intensive and continuous welding dutyBuilt with reliable cooling parts and effective heat exchangersLow maintenance requirements welding-machine and torch cooling circuit, continuous-duty design, simple controls, low-maintenance construction
Min. Order: 1 Unit
GST
You need the laser source at a constant temperature, not a fluctuating one, and that is what an Aquatech Plus laser chiller is built to hold through cutting, marking, or welding. Aquatech Plus laser chillers circulate coolant or chilled water into the laser source and its associated components, holding the operating temperature constant for laser cutting, marking, and welding, built with compressors, heat exchangers, and easy-to-operate control panels. Circulates coolant or chilled water into the laser source and associated componentsHolds laser operating temperature constantBuilt with compressors, heat exchangers, and control panelsLow maintenance requirements laser-source cooling circuit, constant-temperature control, compressor and heat-exchanger construction, low-maintenance design
Min. Order: 1 Unit
GST
A test bench needs steady temperature and no extra vibration in the background, and that combination is what an Aquatech Plus laboratory chiller is built to deliver. Aquatech Plus laboratory chillers supply chilled water or coolant to analytical machines, reactors, imaging systems, and test equipment, with a quick-to-fit control system, efficient cooling parts, reliable compressors, and quiet, low-vibration, low-maintenance operation for research and quality-control labs. Supplies chilled water or coolant to analytical machines, reactors, imaging systems, and test equipmentQuiet operation with low vibrationQuick-to-fit control system and reliable compressorsLow maintenance design analytical and test equipment cooling, quiet low-vibration operation, quick-to-fit control system, low-maintenance construction
Min. Order: 1 Unit
GST
A small office block and a full shopping mall don't draw the same load, and Aquatech Plus commercial water chillers come sized to fit either one, circulating chilled water to keep indoor temperatures stable. Aquatech Plus commercial water chillers circulate chilled water through air handling units or fan coil units to keep indoor temperatures stable, available in various sizes and capacities, built with effective heat exchangers, reliable compressors, and reliable control systems for offices, hotels, malls, and schools. Circulates chilled water through air handling units or fan coil unitsAvailable in various sizes and capacitiesBuilt with effective heat exchangers and reliable compressorsUsed in office blocks, hotels, hospitals, malls, and schools chilled-water AHU/FCU circulation, multiple size and capacity options, reliable compressor and control system construction
Min. Order: 1 Unit
GST
An MRI scanner generates heat with every scan it runs, and the Aquatech Plus MRI chiller is what keeps that heat from ever reaching the delicate electronics inside. Aquatech Plus MRI chillers regulate MRI equipment temperature by circulating chilled or cool water in key system parts, built with reliable cooling features, effective heat exchangers, and easy controllers for quiet, stable operation in hospitals and diagnostic imaging facilities. Circulates chilled or cool water in key MRI system partsKeeps operating conditions constant for delicate electronicsBuilt with reliable cooling features, heat exchangers, and easy controllersQuiet operation with stable performance MRI system-part cooling circuit, delicate-electronics temperature control, quiet stable operation, easy controllers
Min. Order: 1 Unit
GST
A treatment plant that arrives finished, not built on site: that is what a containerized system changes. Aquatech Plus fits the full process, RO, UV disinfection, carbon and optional softening, inside a standard ISO container, factory-tested before it ships. Aquatech Plus Containerized Water Treatment Systems are factory-assembled, plug-and-play plants built inside 10/20/40 ft ISO shipping containers, running multi-grade filtration, activated carbon, optional softening, micron filtration, RO, and optional UV/ozone disinfection, with fully automatic PLC/HMI control, SCADA-ready communication, and treatment capacity stated up to 100,000 LPH, factory tested (FAT) and built to ISO, IS, and WHO standards for drinking water, industrial, pharmaceutical, and food and beverage applications. Container sizes: 10 ft / 20 ft / 40 ft ISO shipping containerTreatment capacity stated up to 100,000 LPH (500 LPH to 100,000 LPH per parameter table; 100-5,000 LPH per product summary)Treatment process: MGF to ACF to optional softener to micron filter to RO to optional UV/OzoneRecovery rate up to 75%, depending on raw water qualityAutomation: fully automatic PLC + HMI, Modbus RTU/Ethernet, SCADA-ready, optional GSM/Wi-Fi/IoTFactory acceptance tested (hydraulic, leak, functional) before dispatch; road/rail/sea transport ready ISO container 10/20/40 ft, capacity up to 100,000 LPH, PLC + HMI automation, RO + UV/Ozone process, FAT tested
Min. Order: 1 Unit
GST
Untreated raw water rarely announces its damage until scaling and corrosion have already set in. The Aquatech Plus Industrial RO System heads that off, purifying water at industrial flow rates from 250 to 100,000+ LPH with 95-99.5% salt rejection. Aquatech Plus Industrial RO Systems are skid-mounted or modular reverse osmosis plants covering 250 to 100,000+ LPH capacity, with 40-75% recovery rate, 95-99.5% salt rejection, thin-film composite polyamide membranes in FRP/SS304/SS316 housings, multistage pumps rated 1-15 HP, and PLC-based control, producing product water below 50 ppm TDS for boiler feed, cooling tower, and manufacturing-process applications. System capacity: 250 LPH to 100,000+ LPHRecovery rate: 40-75%; salt rejection: 95-99.5%Membrane: thin-film composite (TFC), polyamide, 4/8 inch, in FRP/SS304/SS316 housingHigh-pressure pump: multistage, SS304/SS316, 1-15 HPOperating pressure: 10-25 Bar; product water TDS below 50 ppmControl: PLC/microcontroller with online TDS and conductivity monitoring, auto-flush systemMembrane life 2-3 years; cartridge filter change every 1-3 months capacity 250-100,000+ LPH, salt rejection 95-99.5%, TFC polyamide membrane, FRP/SS304/SS316 housing, PLC control
Min. Order: 1 Unit
GST
A borewell feeding a factory carries more than water: suspended solids, hardness, chlorine, and organics that will scale a membrane long before it fails outright. Aquatech Plus stops that upstream, across eleven pretreatment series from 1.9 to 3,000 GPM. Aquatech Plus Water Pretreatment Systems span eleven series (MF-1000/1100/600/500/400/410/450/300 media filters, plus SSC/PFH/BFH cartridge and bag filter housings), covering flow rates from about 1.9 GPM to 3,000 GPM in carbon steel, stainless steel, FRP, or plastic construction, using coagulation/flocculation, media filtration, activated carbon, ion-exchange softening, and chemical dosing to protect downstream RO, UF, or ion-exchange systems. Eleven named series from MF-1000 through BFHFlow rate range approximately 1.9 GPM to 3,000 GPM (0.6-682 m³/hr)Tank/housing materials: epoxy-coated carbon steel, 304SS/316SS, FRP, or plasticValve/control options: diaphragm/butterfly with digital stager or PLC; Autotrol, Fleck, or Clack with manual/programmable regenerationSSC Series rated to 150 PSI operating pressure 11 filter series, flow 1.9-3,000 GPM, carbon steel/SS/FRP/plastic, PLC or valve-based regeneration
Min. Order: 1 Unit
GST
A hospital and a chemical plant do not need the same Reverse Osmosis Plant, and Aquatech Plus does not build them one. Industrial (500 LPH-5,000+ LPH), Commercial (100-1,000 LPH), and Desalination configurations each remove up to 99% of dissolved salts and impurities on their own terms. Aquatech Plus Reverse Osmosis Plants remove up to 99% of dissolved salts, heavy metals, and bacteria through a three-stage process (pre-treatment, membrane separation at 50-75% recovery for brackish feed, and post-treatment), offered as Industrial (500 LPH-5,000+ LPH), Commercial (100-1,000 LPH), and Desalination (high-TDS/brackish/seawater) configurations in stainless steel, FRP, or mild steel construction. Removes up to 99% of dissolved salts, heavy metals, and bacteriaIndustrial configuration: 500 LPH to 5,000+ LPHCommercial configuration: 100 LPH to 1,000 LPHRecovery rate for brackish water: 50-75%Construction: stainless steel, FRP, or mild steelPurification capacity options: 100/200/250/500/1,000/2,000/5,000 LPH 99% salt/impurity removal, industrial 500-5,000+ LPH, commercial 100-1,000 LPH, SS/FRP/MS construction
Min. Order: 1 Unit
GST
You have seawater and a shortage of fresh water; an Aquatech Plus Sea Water Treatment Plant closes that gap through Reverse Osmosis and energy recovery. The FMSW series runs from 8,000 to 840,000 GPD across 19 models, sized to a coastline, a vessel, or an island community. Aquatech Plus Sea Water Treatment Plants use Reverse Osmosis (SWRO) desalination with energy recovery, running seawater through intake, pre-treatment, RO membrane desalination, post-treatment disinfection, and brine management, with the FMSW series covering 19 models from 8,000 to 840,000 GPD permeate flow, 2-210 eight-inch membranes, and 15-600 HP motor ratings, for coastal, marine, offshore, and island water-supply applications. FMSW series: 19 models, FMSW-1 to FMSW-132Permeate flow rate: 8,000-840,000 GPD (30-3,179 m³/day)8-inch membranes: 2-210 per unitMotor rating: 15-600 HPApprox. weight: 2,600-35,000 lbsEnergy recovery device recovers energy from the high-pressure brine stream FMSW series 19 models, permeate flow 8,000-840,000 GPD, SWRO technology, energy recovery device
Min. Order: 1 Unit
GST
A commercial building's air quality depends on one component doing its job quietly: the Air Handling Unit. Aquatech Plus builds six standard models spanning 5,000 to 30,000 m³/h airflow, each carrying MERV-rated filtration and a modular casing that adapts to the space around it. Aquatech Plus manufactures Air Handling Units (AHU-500 to AHU-3000) covering 5,000-30,000 m³/h airflow, 10-60 kW cooling and 12-75 kW heating capacity, with DX or chilled-water coils, MERV-8 to MERV-12 filtration (HEPA optional), PLC-based controls, and modular casing for offices, hospitals, hotels, airports, pharmaceutical plants, and manufacturing facilities. Airflow range: 5,000-30,000 m³/h across six standard modelsCooling capacity 10-60 kW; heating capacity 12-75 kWFiltration rated MERV-8 to MERV-12, HEPA available for controlled settingsCoil options: DX coils or chilled-water coils with copper tube/aluminium fin constructionPLC control systems with optional Building Management System (BMS) integrationCasing in galvanized or stainless steel with protective coating airflow 5,000-30,000 m³/h, cooling 10-60 kW, heating 12-75 kW, MERV-8 to MERV-12 filtration, PLC control, modular casing
Min. Order: 1 Unit
GST
Split, hybrid, ductless, or packaged, Aquatech Plus builds HVAC systems across all four, produced under ISO 9001:2015 certified processes with a stated 15-25 year service life. Aquatech Plus HVAC systems are produced under ISO 9001:2015 certified processes in split, hybrid, ductless mini-split, and packaged configurations, specified across eight rated models (HVAC-10 to HVAC-60) with cooling capacity 10-60kW, heating capacity 12-70kW, and a stated 15-25 year useful life. Production processes are ISO 9001:2015 certifiedAvailable in Split, Hybrid, Ductless Mini-Split, and Packaged configurationsEight rated models specified: HVAC-10 through HVAC-60Cooling capacity range across models: 10kW to 60kW; heating capacity: 12kW to 70kWStated useful life of 15 to 25 years under good maintenance Aquatech Plus, HVAC system, ISO 9001:2015 certified, split/hybrid/ductless/packaged configurations, HVAC-10 to HVAC-60 model range, 10-60kW cooling capacity
Min. Order: 1 Unit
GST
What does an industry's water actually need - salt removal, bacteria control, or full effluent recycling? Aquatech Plus builds the answer as a system, combining RO, UF, softening, ETP, STP, and ZLD technology to match the process rather than forcing one fixed configuration. Aquatech Plus Industrial Water Treatment Systems combine Reverse Osmosis (up to 99% dissolved-salt removal), Ultrafiltration (bacteria and suspended-solids removal), Nanofiltration, ion-exchange softening, and Effluent/Sewage Treatment Plant processes, configured for food, dairy, boiler-water, oil and gas, pharmaceutical, and mining applications, with design, installation, automation, and AMC-based maintenance services. Reverse Osmosis removes up to 99% of dissolved saltsUltrafiltration removes bacteria and suspended solidsNanofiltration is selective to specific dissolved pollutantsIon-exchange softening targets calcium and magnesium for boiler waterETP/STP processes include coagulation, biological treatment, sludge dewatering, tertiary filtration, and UV/chemical disinfectionServices include design, installation, automation integration, and Annual Maintenance Contracts (AMC) RO up to 99% salt removal, UF bacteria removal, NF selective filtration, ion-exchange softening, ETP/STP treatment
Min. Order: 1 Unit
GST
You have a narrow window to cool raw milk before bacteria take hold, and the Aquatech Plus Bulk Milk Chiller is built for exactly that window. Food-grade stainless steel tanks from 250 to 10,000 litres, in DX or Ice Bank Type cooling, keep milk at safe storage temperature from collection to transport. Aquatech Plus Bulk Milk Chillers (MTD-250 to MTD-10000) cool raw milk to safe storage temperature in food-grade stainless steel (AISI 304) tanks from 250 to 10,000 litres, offered in DX or Ice Bank Type cooling with 60-75 mm CFC-free PUF insulation, geared-motor agitation, digital controls, and CIP on larger models, manufactured under an ISO 9001:2015 certified process for dairy farms, collection centres, and cooperatives. Capacity range: 250-10,000 litres across eight standard modelsTwo cooling types offered: Direct Expansion (DX) and Ice Bank Type (IBT)Tank material: food-grade stainless steel (AISI 304)Insulation: 60-75 mm CFC-free high-density PUFPower input range: 1.2-23.6 kW; pull-down time 5-6 hoursISO 9001:2015 certified manufacturing process capacity 250-10,000 L, DX or Ice Bank cooling, AISI 304 stainless steel, PUF insulation 60-75mm, ISO 9001:2015 certified
Min. Order: 1 Unit
GST
A small office and a full airport terminal don't draw the same load, and Aquatech Plus builds HVAC chillers across six types, air-cooled to modular, to match either one. Aquatech Plus HVAC chillers cool water or process fluids for air handling units and fan coil systems, offered in six types (Air Cooled, Water Cooled, Screw, Scroll, Centrifugal, Modular) across a stated 10-100 TR cooling capacity range, with ASME-compliant shell condensers and refrigerant options from R134a to R1234ze. Cools water or process fluids for air handling units and fan coil systemsAvailable in six types: Air Cooled, Water Cooled, Screw, Scroll, Centrifugal, ModularCooling capacity range stated as 10 TR to 100 TRRefrigerant options: R134a, R410A, R407C, R513A, R1234zeCondensers described as ASME-compliant shell condensers Aquatech Plus, HVAC chiller, air-cooled/water-cooled/screw/scroll/centrifugal/modular types, 10-100TR capacity, ASME-compliant condenser
Min. Order: 1 Unit
GST
Thirty minutes after milking is when quality is won or lost, and the Aquatech Plus Bulk Milk Cooler is built for that window. Open Type or Closed Type tanks from 250 to 10,000 litres, in DX or Ice Bank Tank cooling, hold milk at a regulated temperature straight through to transport. Aquatech Plus Bulk Milk Coolers cool and hold raw milk at a regulated temperature immediately after collection, offered in Open Type or Closed Type construction across the MTD series from 250 to 10,000 litres, with Direct Expansion or Ice Bank Tank cooling technology, serving dairy farms, collection centres, cooperatives, and processing units, including export-configured units adapted for country-specific voltage and climate. Capacity range: 250-10,000 litres across the MTD seriesConstruction options: Open Type or Closed TypeCooling technology: Direct Expansion (DX) or Ice Bank Tank (IBT)Power input range: 1.2-23.6 kW; pull-down time 5-6 hoursExport units adapted for country-specific voltage and climate with full shipment documentation capacity 250-10,000 L, Open or Closed Type, DX or Ice Bank Tank cooling, 1-2 agitators, export-configured
Min. Order: 1 Unit
GST
What actually happens inside an SWRO system when seawater meets 55 to 70 bar of pressure? Salt, bacteria, and dissolved minerals get rejected at up to 99%, while an energy recovery device claws back power from the brine stream leaving behind. Aquatech Plus Seawater Reverse Osmosis (SWRO) Systems convert seawater into freshwater through pre-treatment, high-pressure RO membrane separation at roughly 55-70 bar (up to 99% salt rejection), and post-treatment conditioning, with energy recovery devices reducing power consumption, serving municipal, hotel/resort, offshore/marine, and industrial applications at scalable capacity. Salt rejection rate as high as 99%Operating pressure approximately 55-70 barEnergy recovery device reclaims power from the high-pressure brine streamPre-treatment includes sand/multimedia filtration, cartridge filtration, and ultrafiltrationPost-treatment includes remineralisation, pH balancing, and chlorination/disinfectionApplications: municipal, hotel/resort, offshore/marine, and industrial facilities salt rejection up to 99%, operating pressure 55-70 bar, energy recovery device, scalable SWRO design
Min. Order: 1 Unit
GST
Raw water and clean water are separated by five defined stages, not one machine. Aquatech Plus builds that sequence, screening through disinfection, into drinking water, sewage, and industrial wastewater treatment plant configurations. Aquatech Plus Water Treatment Plants carry raw water through screening, coagulation/flocculation, sedimentation, filtration (sand/gravel/activated carbon or dual media), and disinfection (chlorination, UV, or ozone), with an optional RO stage for dissolved salts and heavy metals, offered as drinking water, sewage water, and industrial wastewater treatment plant configurations built from common components including sedimentation tanks, dual media filters, chemical dosing, RO units, and sludge management units. Process stages: screening, coagulation/flocculation, sedimentation, filtration, disinfectionDisinfection methods: chlorination, UV treatment, or ozone treatmentRO stage available for dissolved-salt and heavy-metal removalThree configurations: drinking water, sewage water, and industrial wastewater treatmentCommon components include sedimentation tanks, dual media filters, chemical dosing systems, RO units, and sludge management units multi-stage treatment process, RO stage optional, drinking/sewage/industrial configurations, chlorination/UV/ozone disinfection
Min. Order: 1 Unit
GST
One gram an hour on the smallest model, two kilograms an hour on the largest: that is the ozone generation range Aquatech Plus builds this system around. No chlorine, no residue, just ozone gas reacting with contaminants and converting back to oxygen. Aquatech Plus Industrial Ozone Water Treatment Systems generate ozone (O3) via corona discharge technology, inject it through a Venturi injector or diffuser into an SS contact tank, and neutralise unreacted ozone through an ozone destructor, with generation capacity from 1 g/hr to 2 kg/hr, fully automatic PLC control, and ISO 9001:2015 & CE certification, removing bacteria, viruses, fungi, mould, protozoa, and algae with zero chemical residue for RO, bottled drinking water, and mineral water plants. Ozone generation capacity: 1 g/hr to 2 kg/hr (model dependent)Technology: high-efficiency corona discharge ozone generationDisinfects bacteria, viruses, fungi, mould, protozoa, and algae with no chemical residueCertified ISO 9001:2015 and CEFully automatic PLC-controlled operationOzone-resistant materials: PTFE/Teflon/SS316/PVC contact components ozone O3 disinfection, generation 1g/hr-2kg/hr, ISO 9001:2015 & CE certified, PLC automatic control, zero chemical residue
Min. Order: 1 Unit
GST
A hollow fiber membrane at 0.01 to 0.1 micron is small enough to stop bacteria and viruses and still let minerals through. That is the entire principle behind the Aquatech Plus Ultrafiltration System, running at up to 99.99% pathogen removal efficiency. Aquatech Plus Ultrafiltration Systems use hollow fiber membranes at 0.01-0.1 micron to remove suspended solids, bacteria, viruses, colloidal silica, and organic macromolecules while passing dissolved minerals, operating at 1-3 bar pressure, up to 95% recovery, 40-120 LMH flux, and up to 99.99% pathogen removal efficiency, with PLC-based automatic backwashing and optional CIP, commonly staged ahead of reverse osmosis for TDS reduction. Membrane pore size: 0.01-0.1 micron (hollow fiber)Operating pressure: 1-3 barRecovery rate: up to 95%; Flux rate: 40-120 LMHPathogen removal efficiency: up to 99.99%Molecular Weight Cut-Off (MWCO): 10,000-100,000 DaltonsAutomatic PLC-controlled backwashing with optional CIP cycle pore size 0.01-0.1 micron, recovery up to 95%, pathogen removal up to 99.99%, PLC automated backwash
Min. Order: 1 Unit
GST
Ten thousand litres of hard water leaves behind calcium and magnesium wherever it sits, in pipes, boilers, and appliances alike. The Aquatech Plus AP series softener runs ion exchange at 9,000 LPH to stop it before it starts. Aquatech Plus Water Softeners remove calcium and magnesium hardness through ion-exchange technology, with the AP300R-AP2000R series each rated at 9,000 LPH flow rate, resin tank volumes of 310-1,890 litres, salt tank volumes of 500-2,000 litres, and 42-270 kg salt required per regeneration, offered across Salt-Based, Salt-Free (TAC), Dual-Tank, magnetic/electronic, and Industrial Water Softener System configurations. AP series flow rate: 9,000 LPH per model (AP300R-AP2000R)Resin tank volume: 310-1,890 litresSalt tank volume: 500-2,000 litresSalt required per regeneration: 42-270 kgWorking pressure: 0.15-0.6 MPaFive configuration types: Salt-Based, Salt-Free (TAC), Dual-Tank, magnetic/electronic descaler, Industrial ion-exchange softening, AP series 9,000 LPH, resin tank 310-1,890 L, salt per regeneration 42-270 kg
Min. Order: 1 Unit
GST
A home, a restaurant, and a factory all want the same 95-99% pure water, just at different rates. The Aquatech Plus RO Machine scales across that range, FMBW-0.25 to FMBW-3, from 1,500 to 18,000 GPD. Aquatech Plus RO Machines (FMBW-0.25 to FMBW-3) use multi-stage reverse osmosis to deliver 95-99% pure water, removing dissolved salts, heavy metals, bacteria, viruses, and chemical contaminants, covering 1,500-18,000 GPD flow rate with 4-inch x 40-inch membranes and 0.75-3 HP motor ratings, featuring TDS control, UV/UF purification, and smart monitoring across domestic, commercial, and industrial tiers. FMBW series: 6 models, flow rate 1,500-18,000 GPDWater purity: 95-99% via multi-stage purificationMembrane: 4-inch x 40-inch, 1-12 membranes per unitMotor rating: 0.75-2 HP (60 Hz) / 1-3 HP (50 Hz)Features: TDS control, UV/UF purification, smart monitoring, water-saving technology FMBW series 1,500-18,000 GPD, 95-99% pure water, TDS control, UV/UF purification
Min. Order: 1 Unit
GST
Your hotel, hospital, or office runs on water all day, every day, and a domestic purifier was never built for that load. The Aquatech Plus APCO series was, covering 250 to 5,000 LPH with SS multistage pumps built for continuous duty. Aquatech Plus Commercial RO Systems (APCO-250 to APCO-5000) remove TDS, heavy metals, bacteria, and chemical contaminants through raw water intake, sediment/carbon pre-filtration, a high-pressure pump and RO membrane, and post-treatment, covering 250-5,000 LPH flow rate with SS multistage pumps and 1.5-7.0 kW power consumption, in stainless steel or FRP construction for hotels, hospitals, restaurants, and offices. APCO series: 250-5,000 LPH flow rate across six modelsMembrane configuration: 1x4040 to 6x4040Pump: SS multistage; power consumption 1.5-7.0 kWRemoves TDS, heavy metals, bacteria, viruses, chlorine, and industrial pollutantsConstruction: stainless steel or FRP APCO series 250-5,000 LPH, SS multistage pump, 1.5-7.0 kW power, SS/FRP construction
Min. Order: 1 Unit
GST
Four membranes on the smallest model, twenty-four on the largest: the APFMBW series scales that precisely. Aquatech Plus builds this Industrial RO Plant range from 28,000 to 173,000 GPD permeate flow for manufacturing, boiler feed, and cooling. Aquatech Plus Industrial RO Plants (APFMBW-4F to APFMBW-24F) eliminate dissolved salts, heavy metals, and chemicals through high-pressure membrane filtration, covering 28,000-173,000 GPD permeate flow with 4-24 eight-inch membranes and 5-25 HP motor ratings, available fully automated, semi-automated, or manual, for pharmaceutical, textile, and food-processing production, boiler-feed, and cooling applications. APFMBW series: 10 models, permeate flow 28,000-173,000 GPDMembranes: 4-24 eight-inch units per modelMotor rating: 7.5-20 HP (60 Hz) / 5-25 HP (50 Hz)Unit weight: 1,043-2,064 kgAutomation: fully automated, semi-automated, or manual APFMBW series 28,000-173,000 GPD, 4-24 membranes, automated/semi-auto/manual, high-pressure membrane filtration
Min. Order: 1 Unit
GST
A boiler needs mineral-free water and a semiconductor line needs something closer to zero. The Aquatech Plus DM Plant answers both, with Two-Bed configurations for general high-purity use and Mixed-Bed configurations for ultra-low TDS below 5 mg/L. Aquatech Plus DM Plants remove dissolved salts, calcium, magnesium, chlorides, and silica through cation and anion ion-exchange columns, offered as Two-Bed (general high-purity), Mixed-Bed (ultra-low TDS below 5 mg/L), and Small (laboratory/pilot-plant) configurations in FRP and stainless steel construction with optional PLC automation, for thermal power, pharmaceutical, electronics, chemical, and food and beverage applications. Two-stage ion exchange: cation column then anion column, combining to demineralised H2OMixed-Bed configuration achieves TDS below 5 mg/LThree configurations: Two-Bed, Mixed-Bed, and Small DM Water PlantConstruction materials: FRP and stainless steelPLC-controlled automation option available ion-exchange demineralization, Two-Bed / Mixed-Bed / Small configurations, TDS below 5 mg/L (mixed-bed), FRP/SS construction
Min. Order: 1 Unit
GST
Looking for “Aquatech Plus”
Tell us your requirement & get the best quotes!
Reach Global
Suppliers
Accurate Business
Customized Services
For Buyers
Request for Quotation
