AQUATECH PLUS PRIVATE LIMITED

Rajkot, , India

GST: 24aamca4757d1zq

Verified as AQUATECH PLUS PRIVATE LIMITED

GST Verified
Manufacturer
Brand Owner
Exporter
Send Inquiry

Our Products

Latest
Name (A-Z)
Name (Z-A)

Showing 1-24 of 55 products

Commercial RO Systems

Commercial RO Systems

Your hotel, hospital, or office runs on water all day, every day, and a domestic purifier was never built for that load. The Aquatech Plus APCO series was, covering 250 to 5,000 LPH with SS multistage pumps built for continuous duty.
Aquatech Plus Commercial RO Systems (APCO-250 to APCO-5000) remove TDS, heavy metals, bacteria, and chemical contaminants through raw water intake, sediment/carbon pre-filtration, a high-pressure pump and RO membrane, and post-treatment, covering 250-5,000 LPH flow rate with SS multistage pumps and 1.5-7.0 kW power consumption, in stainless steel or FRP construction for hotels, hospitals, restaurants, and offices.
APCO series: 250-5,000 LPH flow rate across six models
Membrane configuration: 1x4040 to 6x4040
Pump: SS multistage; power consumption 1.5-7.0 kW
Removes TDS, heavy metals, bacteria, viruses, chlorine, and industrial pollutants
Construction: stainless steel or FRP
APCO series 250-5,000 LPH, SS multistage pump, 1.5-7.0 kW power, SS/FRP construction
Price on Request
1 Unit
MOQ
Details
Industrial Ozone Water Treatment Systems

Industrial Ozone Water Treatment Systems

One gram an hour on the smallest model, two kilograms an hour on the largest: that is the ozone generation range Aquatech Plus builds this system around. No chlorine, no residue, just ozone gas reacting with contaminants and converting back to oxygen.
Aquatech Plus Industrial Ozone Water Treatment Systems generate ozone (O3) via corona discharge technology, inject it through a Venturi injector or diffuser into an SS contact tank, and neutralise unreacted ozone through an ozone destructor, with generation capacity from 1 g/hr to 2 kg/hr, fully automatic PLC control, and ISO 9001:2015 & CE certification, removing bacteria, viruses, fungi, mould, protozoa, and algae with zero chemical residue for RO, bottled drinking water, and mineral water plants.
Ozone generation capacity: 1 g/hr to 2 kg/hr (model dependent)
Technology: high-efficiency corona discharge ozone generation
Disinfects bacteria, viruses, fungi, mould, protozoa, and algae with no chemical residue
Certified ISO 9001:2015 and CE
Fully automatic PLC-controlled operation
Ozone-resistant materials: PTFE/Teflon/SS316/PVC contact components
ozone O3 disinfection, generation 1g/hr-2kg/hr, ISO 9001:2015 & CE certified, PLC automatic control, zero chemical residue
Price on Request
1 Unit
MOQ
Details
Sea Water Treatment Plant

Sea Water Treatment Plant

You have seawater and a shortage of fresh water; an Aquatech Plus Sea Water Treatment Plant closes that gap through Reverse Osmosis and energy recovery. The FMSW series runs from 8,000 to 840,000 GPD across 19 models, sized to a coastline, a vessel, or an island community.
Aquatech Plus Sea Water Treatment Plants use Reverse Osmosis (SWRO) desalination with energy recovery, running seawater through intake, pre-treatment, RO membrane desalination, post-treatment disinfection, and brine management, with the FMSW series covering 19 models from 8,000 to 840,000 GPD permeate flow, 2-210 eight-inch membranes, and 15-600 HP motor ratings, for coastal, marine, offshore, and island water-supply applications.
FMSW series: 19 models, FMSW-1 to FMSW-132
Permeate flow rate: 8,000-840,000 GPD (30-3,179 m³/day)
8-inch membranes: 2-210 per unit
Motor rating: 15-600 HP
Approx. weight: 2,600-35,000 lbs
Energy recovery device recovers energy from the high-pressure brine stream
FMSW series 19 models, permeate flow 8,000-840,000 GPD, SWRO technology, energy recovery device
Price on Request
1 Unit
MOQ
Details
Water Treatment Plant

Water Treatment Plant

Raw water and clean water are separated by five defined stages, not one machine. Aquatech Plus builds that sequence, screening through disinfection, into drinking water, sewage, and industrial wastewater treatment plant configurations.
Aquatech Plus Water Treatment Plants carry raw water through screening, coagulation/flocculation, sedimentation, filtration (sand/gravel/activated carbon or dual media), and disinfection (chlorination, UV, or ozone), with an optional RO stage for dissolved salts and heavy metals, offered as drinking water, sewage water, and industrial wastewater treatment plant configurations built from common components including sedimentation tanks, dual media filters, chemical dosing, RO units, and sludge management units.
Process stages: screening, coagulation/flocculation, sedimentation, filtration, disinfection
Disinfection methods: chlorination, UV treatment, or ozone treatment
RO stage available for dissolved-salt and heavy-metal removal
Three configurations: drinking water, sewage water, and industrial wastewater treatment
Common components include sedimentation tanks, dual media filters, chemical dosing systems, RO units, and sludge management units
multi-stage treatment process, RO stage optional, drinking/sewage/industrial configurations, chlorination/UV/ozone disinfection
Price on Request
1 Unit
MOQ
Details
Containerized Water Treatment Systems

Containerized Water Treatment Systems

A treatment plant that arrives finished, not built on site: that is what a containerized system changes. Aquatech Plus fits the full process, RO, UV disinfection, carbon and optional softening, inside a standard ISO container, factory-tested before it ships.
Aquatech Plus Containerized Water Treatment Systems are factory-assembled, plug-and-play plants built inside 10/20/40 ft ISO shipping containers, running multi-grade filtration, activated carbon, optional softening, micron filtration, RO, and optional UV/ozone disinfection, with fully automatic PLC/HMI control, SCADA-ready communication, and treatment capacity stated up to 100,000 LPH, factory tested (FAT) and built to ISO, IS, and WHO standards for drinking water, industrial, pharmaceutical, and food and beverage applications.
Container sizes: 10 ft / 20 ft / 40 ft ISO shipping container
Treatment capacity stated up to 100,000 LPH (500 LPH to 100,000 LPH per parameter table; 100-5,000 LPH per product summary)
Treatment process: MGF to ACF to optional softener to micron filter to RO to optional UV/Ozone
Recovery rate up to 75%, depending on raw water quality
Automation: fully automatic PLC + HMI, Modbus RTU/Ethernet, SCADA-ready, optional GSM/Wi-Fi/IoT
Factory acceptance tested (hydraulic, leak, functional) before dispatch; road/rail/sea transport ready
ISO container 10/20/40 ft, capacity up to 100,000 LPH, PLC + HMI automation, RO + UV/Ozone process, FAT tested
Price on Request
1 Unit
MOQ
Details
Water Treatment Systems

Water Treatment Systems

What does an industry's water actually need - salt removal, bacteria control, or full effluent recycling? Aquatech Plus builds the answer as a system, combining RO, UF, softening, ETP, STP, and ZLD technology to match the process rather than forcing one fixed configuration.
Aquatech Plus Industrial Water Treatment Systems combine Reverse Osmosis (up to 99% dissolved-salt removal), Ultrafiltration (bacteria and suspended-solids removal), Nanofiltration, ion-exchange softening, and Effluent/Sewage Treatment Plant processes, configured for food, dairy, boiler-water, oil and gas, pharmaceutical, and mining applications, with design, installation, automation, and AMC-based maintenance services.
Reverse Osmosis removes up to 99% of dissolved salts
Ultrafiltration removes bacteria and suspended solids
Nanofiltration is selective to specific dissolved pollutants
Ion-exchange softening targets calcium and magnesium for boiler water
ETP/STP processes include coagulation, biological treatment, sludge dewatering, tertiary filtration, and UV/chemical disinfection
Services include design, installation, automation integration, and Annual Maintenance Contracts (AMC)
RO up to 99% salt removal, UF bacteria removal, NF selective filtration, ion-exchange softening, ETP/STP treatment
Price on Request
1 Unit
MOQ
Details
Industrial RO System

Industrial RO System

Untreated raw water rarely announces its damage until scaling and corrosion have already set in. The Aquatech Plus Industrial RO System heads that off, purifying water at industrial flow rates from 250 to 100,000+ LPH with 95-99.5% salt rejection.
Aquatech Plus Industrial RO Systems are skid-mounted or modular reverse osmosis plants covering 250 to 100,000+ LPH capacity, with 40-75% recovery rate, 95-99.5% salt rejection, thin-film composite polyamide membranes in FRP/SS304/SS316 housings, multistage pumps rated 1-15 HP, and PLC-based control, producing product water below 50 ppm TDS for boiler feed, cooling tower, and manufacturing-process applications.
System capacity: 250 LPH to 100,000+ LPH
Recovery rate: 40-75%; salt rejection: 95-99.5%
Membrane: thin-film composite (TFC), polyamide, 4/8 inch, in FRP/SS304/SS316 housing
High-pressure pump: multistage, SS304/SS316, 1-15 HP
Operating pressure: 10-25 Bar; product water TDS below 50 ppm
Control: PLC/microcontroller with online TDS and conductivity monitoring, auto-flush system
Membrane life 2-3 years; cartridge filter change every 1-3 months
capacity 250-100,000+ LPH, salt rejection 95-99.5%, TFC polyamide membrane, FRP/SS304/SS316 housing, PLC control
Price on Request
1 Unit
MOQ
Details
Bulk Milk Chillers

Bulk Milk Chillers

You have a narrow window to cool raw milk before bacteria take hold, and the Aquatech Plus Bulk Milk Chiller is built for exactly that window. Food-grade stainless steel tanks from 250 to 10,000 litres, in DX or Ice Bank Type cooling, keep milk at safe storage temperature from collection to transport.
Aquatech Plus Bulk Milk Chillers (MTD-250 to MTD-10000) cool raw milk to safe storage temperature in food-grade stainless steel (AISI 304) tanks from 250 to 10,000 litres, offered in DX or Ice Bank Type cooling with 60-75 mm CFC-free PUF insulation, geared-motor agitation, digital controls, and CIP on larger models, manufactured under an ISO 9001:2015 certified process for dairy farms, collection centres, and cooperatives.
Capacity range: 250-10,000 litres across eight standard models
Two cooling types offered: Direct Expansion (DX) and Ice Bank Type (IBT)
Tank material: food-grade stainless steel (AISI 304)
Insulation: 60-75 mm CFC-free high-density PUF
Power input range: 1.2-23.6 kW; pull-down time 5-6 hours
ISO 9001:2015 certified manufacturing process
capacity 250-10,000 L, DX or Ice Bank cooling, AISI 304 stainless steel, PUF insulation 60-75mm, ISO 9001:2015 certified
Price on Request
1 Unit
MOQ
Details
Air Handling Unit

Air Handling Unit

A commercial building's air quality depends on one component doing its job quietly: the Air Handling Unit. Aquatech Plus builds six standard models spanning 5,000 to 30,000 m³/h airflow, each carrying MERV-rated filtration and a modular casing that adapts to the space around it.
Aquatech Plus manufactures Air Handling Units (AHU-500 to AHU-3000) covering 5,000-30,000 m³/h airflow, 10-60 kW cooling and 12-75 kW heating capacity, with DX or chilled-water coils, MERV-8 to MERV-12 filtration (HEPA optional), PLC-based controls, and modular casing for offices, hospitals, hotels, airports, pharmaceutical plants, and manufacturing facilities.
Airflow range: 5,000-30,000 m³/h across six standard models
Cooling capacity 10-60 kW; heating capacity 12-75 kW
Filtration rated MERV-8 to MERV-12, HEPA available for controlled settings
Coil options: DX coils or chilled-water coils with copper tube/aluminium fin construction
PLC control systems with optional Building Management System (BMS) integration
Casing in galvanized or stainless steel with protective coating
airflow 5,000-30,000 m³/h, cooling 10-60 kW, heating 12-75 kW, MERV-8 to MERV-12 filtration, PLC control, modular casing
Price on Request
1 Unit
MOQ
Details
HVAC Chillers

HVAC Chillers

A small office and a full airport terminal don't draw the same load, and Aquatech Plus builds HVAC chillers across six types, air-cooled to modular, to match either one.
Aquatech Plus HVAC chillers cool water or process fluids for air handling units and fan coil systems, offered in six types (Air Cooled, Water Cooled, Screw, Scroll, Centrifugal, Modular) across a stated 10-100 TR cooling capacity range, with ASME-compliant shell condensers and refrigerant options from R134a to R1234ze.
Cools water or process fluids for air handling units and fan coil systems
Available in six types: Air Cooled, Water Cooled, Screw, Scroll, Centrifugal, Modular
Cooling capacity range stated as 10 TR to 100 TR
Refrigerant options: R134a, R410A, R407C, R513A, R1234ze
Condensers described as ASME-compliant shell condensers
Aquatech Plus, HVAC chiller, air-cooled/water-cooled/screw/scroll/centrifugal/modular types, 10-100TR capacity, ASME-compliant condenser
Price on Request
1 Unit
MOQ
Details
HVAC Systems

HVAC Systems

Split, hybrid, ductless, or packaged, Aquatech Plus builds HVAC systems across all four, produced under ISO 9001:2015 certified processes with a stated 15-25 year service life.
Aquatech Plus HVAC systems are produced under ISO 9001:2015 certified processes in split, hybrid, ductless mini-split, and packaged configurations, specified across eight rated models (HVAC-10 to HVAC-60) with cooling capacity 10-60kW, heating capacity 12-70kW, and a stated 15-25 year useful life.
Production processes are ISO 9001:2015 certified
Available in Split, Hybrid, Ductless Mini-Split, and Packaged configurations
Eight rated models specified: HVAC-10 through HVAC-60
Cooling capacity range across models: 10kW to 60kW; heating capacity: 12kW to 70kW
Stated useful life of 15 to 25 years under good maintenance
Aquatech Plus, HVAC system, ISO 9001:2015 certified, split/hybrid/ductless/packaged configurations, HVAC-10 to HVAC-60 model range, 10-60kW cooling capacity
Price on Request
1 Unit
MOQ
Details
Low Temperature Chiller

Low Temperature Chiller

What stops a chiller from icing up the moment it drops below freezing? A glycol circuit, and that is exactly what runs through every Aquatech Plus low temperature chiller.
Aquatech Plus low temperature chillers use a glycol cooling circuit to reach sub-zero temperatures without ice formation or thermal shock, stated across a -40°C to +10°C operating range, 5-300 kW cooling capacity, and R404A/R507/R134a refrigerant options, factory-tested before service.
Uses a glycol cooling circuit to prevent ice formation and thermal shock
Operating temperature range stated as -40°C to +10°C (±0.3°C stability)
Cooling capacity range stated as 5 kW to 300 kW
Glycol concentration stated as 20%-50%
Factory-tested for performance, safety, and stability before service
Aquatech Plus, low temperature chiller, glycol cooling circuit, -40°C to +10°C range, 5-300kW capacity, R404A/R507/R134a refrigerants
Price on Request
1 Unit
MOQ
Details
Industrial Process Chillers

Industrial Process Chillers

No catalogue sizing here: Aquatech Plus industrial process chillers are set to the heat load, duty cycle, and installation limits of your process, then factory-tested before dispatch.
Aquatech Plus industrial process chillers are engineered per application rather than catalogue sizing, offered in air-cooled or water-cooled configurations with PLC or microprocessor control, a stated cooling capacity range of 5-500 and temperature control range of 5-30 (stability ±0.3), and pre-dispatch performance testing on every unit.
Engineered per application heat load, duty cycle, and installation limits
Available in air-cooled or water-cooled configurations
PLC-controlled or microprocessor-controlled temperature adjustment
Cooling capacity range stated as 5-500 (unit not specified in source)
Pre-dispatch performance testing carried out on all systems
Aquatech Plus, industrial process chiller, air-cooled configuration, water-cooled configuration, PLC/microprocessor control, scroll/screw/inverter-scroll compressors
Price on Request
1 Unit
MOQ
Details
Industrial Water Chiller

Industrial Water Chiller

A cooling tower on site, no water to spare, or waste heat to put to use, three different starting points, and Aquatech Plus builds an industrial water chiller for each of them.
Aquatech Plus industrial water chillers circulate temperature-regulated water to control heat from industrial processes and machinery, offered in water-cooled, air-cooled, and absorption types, with a stated capacity of approximately 1-20 Ton (10-200+ kW per the parameter table) and refrigerant options from R410A to R290.
Circulates temperature-regulated water to control industrial process heat
Available in Water-Cooled, Air-Cooled, and Absorption types
Cooling capacity stated as approximately 1-20 Ton (narrative) / 10-200+ kW (parameter table)
Compressor types: screw, scroll, centrifugal
Refrigerant options include R410A, R407C, R134a, R404A, R22, R32, R290
Aquatech Plus, industrial water chiller, water-cooled type, air-cooled type, absorption type, 1-20 Ton / 10-200+kW capacity, screw/scroll/centrifugal compressors
Price on Request
1 Unit
MOQ
Details
Industrial Chillers

Industrial Chillers

You choose the configuration, air-cooled, water-cooled, or process/glycol, and Aquatech Plus industrial chillers circulate cooled fluid in a closed loop to hold your process temperature steady, day and night.
Aquatech Plus industrial chillers circulate cooled water or water-glycol fluid in a closed-loop vapor-compression cycle to extract heat from process equipment, offered in air-cooled, water-cooled, and process/glycol configurations with scroll, screw, or semi-hermetic compressors, R22-R410A refrigerant options, and a stated cooling capacity range of approximately 8-430 kW+.
Operates on a vapor-compression refrigeration cycle in a closed loop
Available in Air-Cooled, Water-Cooled, and Process & Glycol configurations
Cooling capacity range stated as approximately 8 kW to 430 kW+ (varies by model)
Compressor options: scroll, screw, semi-hermetic
Refrigerant options: R22, R407C, R134a, R404A, R410A
Typical chilled-water output temperature approximately 3-35°C
Aquatech Plus, industrial chiller, air-cooled configuration, water-cooled configuration, process/glycol configuration, 8-430kW+ cooling capacity, scroll/screw/semi-hermetic compressors, R22-R410A refrigerants
Price on Request
1 Unit
MOQ
Details
Commercial Blast Chiller

Commercial Blast Chiller

A slow cool-down risks food quality and safety; a blast chiller from Aquatech Plus reduces the temperature of cooked or raw food fast, with every tray cooled equally.
Aquatech Plus commercial blast chillers rapidly reduce the temperature of cooked or raw food, designed for high product loads with trays or containers receiving equal cooling, built with good insulation, air circulation, and accurate temperature regulation for commercial kitchens and food processing facilities.
Rapidly reduces temperature of cooked or raw food
Designed for high product loads with equal cooling across trays or containers
Built with good insulation and accurate temperature regulation
Used in commercial kitchens, food processing plants, bakeries, and central kitchens
rapid food-cooling function, equal-cooling tray/container design, insulated construction, accurate temperature regulation
Price on Request
1 Unit
MOQ
Details
Commercial Water Chiller

Commercial Water Chiller

A small office block and a full shopping mall don't draw the same load, and Aquatech Plus commercial water chillers come sized to fit either one, circulating chilled water to keep indoor temperatures stable.
Aquatech Plus commercial water chillers circulate chilled water through air handling units or fan coil units to keep indoor temperatures stable, available in various sizes and capacities, built with effective heat exchangers, reliable compressors, and reliable control systems for offices, hotels, malls, and schools.
Circulates chilled water through air handling units or fan coil units
Available in various sizes and capacities
Built with effective heat exchangers and reliable compressors
Used in office blocks, hotels, hospitals, malls, and schools
chilled-water AHU/FCU circulation, multiple size and capacity options, reliable compressor and control system construction
Price on Request
1 Unit
MOQ
Details
Commercial Chillers

Commercial Chillers

An office block, a hotel, a hospital wing: each zone draws on cooling differently, and Aquatech Plus commercial chillers are built to hold performance steady across all of them.
Aquatech Plus commercial chillers deliver chilled water to air conditioning and comfort cooling across different building zones, designed to run under varying occupancy loads and ambient environments for offices, hotels, hospitals, and educational institutions.
Delivers chilled water to zoned air conditioning and comfort cooling
Designed for different occupancy loads and ambient environments
Used in offices, hotels, hospitals, and educational institutions
Built for stable, long-lasting operation with manageable servicing
zoned chilled-water delivery, variable-occupancy design, HVAC-infrastructure compatibility, long-lasting construction
Price on Request
1 Unit
MOQ
Details
Industrial Oil Cooling Chiller

Industrial Oil Cooling Chiller

What happens to hydraulic oil after hours of continuous machine running? It heats up, and Aquatech Plus industrial oil cooling chillers are built to stop that heat from reaching pumps, motors, and bearings.
Aquatech Plus industrial oil cooling chillers circulate chilled oil or use a heat exchange system to hold constant temperature during continuous machine operation, built with dependable compressors, effective heat exchangers, and simple control mechanisms for minimal power consumption in CNC machines, presses, and heavy-duty production equipment.
Circulates chilled oil or uses a heat exchange system for hydraulic and lubrication oil
Designed for continuous machine operation
Built with dependable compressors and effective heat exchangers
Designed for minimal power consumption
hydraulic and lubrication oil cooling, continuous-operation design, dependable compressors, minimal power consumption
Price on Request
1 Unit
MOQ
Details
MRI Chiller

MRI Chiller

An MRI scanner generates heat with every scan it runs, and the Aquatech Plus MRI chiller is what keeps that heat from ever reaching the delicate electronics inside.
Aquatech Plus MRI chillers regulate MRI equipment temperature by circulating chilled or cool water in key system parts, built with reliable cooling features, effective heat exchangers, and easy controllers for quiet, stable operation in hospitals and diagnostic imaging facilities.
Circulates chilled or cool water in key MRI system parts
Keeps operating conditions constant for delicate electronics
Built with reliable cooling features, heat exchangers, and easy controllers
Quiet operation with stable performance
MRI system-part cooling circuit, delicate-electronics temperature control, quiet stable operation, easy controllers
Price on Request
1 Unit
MOQ
Details
Laboratory Chiller

Laboratory Chiller

A test bench needs steady temperature and no extra vibration in the background, and that combination is what an Aquatech Plus laboratory chiller is built to deliver.
Aquatech Plus laboratory chillers supply chilled water or coolant to analytical machines, reactors, imaging systems, and test equipment, with a quick-to-fit control system, efficient cooling parts, reliable compressors, and quiet, low-vibration, low-maintenance operation for research and quality-control labs.
Supplies chilled water or coolant to analytical machines, reactors, imaging systems, and test equipment
Quiet operation with low vibration
Quick-to-fit control system and reliable compressors
Low maintenance design
analytical and test equipment cooling, quiet low-vibration operation, quick-to-fit control system, low-maintenance construction
Price on Request
1 Unit
MOQ
Details
Laser Chiller

Laser Chiller

You need the laser source at a constant temperature, not a fluctuating one, and that is what an Aquatech Plus laser chiller is built to hold through cutting, marking, or welding.
Aquatech Plus laser chillers circulate coolant or chilled water into the laser source and its associated components, holding the operating temperature constant for laser cutting, marking, and welding, built with compressors, heat exchangers, and easy-to-operate control panels.
Circulates coolant or chilled water into the laser source and associated components
Holds laser operating temperature constant
Built with compressors, heat exchangers, and control panels
Low maintenance requirements
laser-source cooling circuit, constant-temperature control, compressor and heat-exchanger construction, low-maintenance design
Price on Request
1 Unit
MOQ
Details
Process & Application Chillers

Process & Application Chillers

A moulding line, a laser cutter, a CNC cell: each one needs its cooling matched to the process, not general comfort cooling, and that is exactly how Aquatech Plus builds this range.
Aquatech Plus process and application chillers are engineered for the specific cooling requirements of a particular industrial process rather than general comfort cooling, with pump and flow arrangement, control logic, and fluid compatibility matched to the application, built to perform under constant loads and fast fluctuating heat conditions.
Designed for specific industrial process requirements, not general comfort cooling
Pump and flow arrangement matched to the application fluid
Built for constant loads and fast fluctuating heat conditions
Used in plastics moulding, laser cutting, pharmaceuticals, chemical processing, food manufacturing, printing, and CNC machining
process-specific cooling design, matched pump and flow arrangement, application-fluid compatibility, constant and fluctuating load capability
Price on Request
1 Unit
MOQ
Details
Turnkey Cooling Solutions

Turnkey Cooling Solutions

Design, installation, commissioning, and support, held under one roof: that is what a turnkey cooling solution from Aquatech Plus covers, with several cooling components combined into a single coordinated system.
Aquatech Plus turnkey cooling solutions combine planning and design, installation, commissioning, and subsequent support into one coordinated system under a single point of accountability, intended for factory plants, pharmaceutical facilities, food processing, data centres, chemical plants, and other infrastructure projects, whether new-build or upgrade.
Covers the full cooling life cycle: design, installation, commissioning, and support
Combines several cooling components into one coordinated system
Managed under a single point of accountability
Suited to both new facilities and facility upgrades
turnkey project scope, single-point accountability, integrated multi-component system, existing-utility compatibility
Price on Request
1 Unit
MOQ
Details

About the Company

Company Facts

Nature of Business

Manufacturer
Brand Owner
Exporter

Industry

Environment , Water Treatment & Distribution

Contact Information

Key Contacts

Ali Badi

Ali Badi

Owner

Admin
Chat Now

Digital Addresses

Profile Link

https://www.globallinker.com/seller/aquatech-plus-private-limited

E-commerce Store

https://aquatechplus.linker.store

Visit

Company Addresses

Head-office/Primary office

PLOT NO.66, SHREE KHODIYAR PARK, RAJKOT AHMEDABAD HIGHWAY, NAVAGAM, Anandpar, Rajkot
Rajkot, India

Get Directions
Send Inquiry

Similar Verified Sellers

Discover other trusted healthcare suppliers on GlobalLinker

BLUEKITES BIOPHARMA CHEM LLP

Ahmedabad, India

GST Verified
Trust Mark GL Trustmark
Consumer Electronics Home And Garden Fabric And Textile Raw Material

DOLPHIN SURGICALS

Mumbai, India

GST Verified
Trust Mark GL Trustmark
Safety And Security Machinery And Tools Commercial Equipment

Anantya Bionics LLP

Bengaluru, India

GST Verified
Trust Mark GL Trustmark
Healthcare Machinery And Tools Home And Garden