ELTEC CABLES AND INSTRUMENTS

Thermocouple Head Is Used For Cold End Termination Of Thermocouple In A Safe Enclosure.

• Aluminum Die Cast

• Weather Proof & Flame Proof

• IP 65

• Colors such as Grey, Black etc. available.

• Hole Size: 6mm / 1/2" / 3/4” BSP

• DIN Rail Temperature Transmitter TMT130 for converting various input signals into a scalable 4 to 20mA analogue output signal
• Wide voltage supply range
• Expanded resistance input (max 2KO)
• Expanded voltage input (max 2KmV)

• Output: 4 to 20mA
• Supply voltage: 7.5 to 45VDC
• Input: RTD, TC, Ohm, mV
• Cold junction: Internal
• Accuracy(Pt100): <0.2K or 0.08%
• Influence of ambient: Negligible
• Load influence: Negligible
• Power supply influence: Negligible
• Resolution: 0.3uA
• Installation: DIN Rail

• 2-wire technology, 4 to 20mA analogue output
• High accuracy in total ambient temperature range
• Internal cold junction
• Wide voltage supply range
• Customer specific measurement range setting or expanded SETUP
• Simple and user friendly software
• USB communication

We at ELTEC manufacture THERMOCOUPLE that can be exposed to stringent environmental conditions & for extremely high temperature applications.

• Bayonet & Flexible Cable Thermocouples
• Base Metal Sheathed Thermocouple
• Mineral Insulated Thermocouple
• Noble Metal Thermocouple

PRODUCT FEATURES

•          Various Thermocouple Calibration such as J, K, T, E, N, R, S, T
•          Exposed, Grounded & Ungrounded Thermocouple junctions
•          Rugged Construction
•          Wide Temperature Range from -200 °C to 1800 °C
•          Probes & Assemblies in various sizes & configuration
•          Various mounting options like Adaptors, Adj. Ferrule fittings, flanged connection, Nipple – Union – Nipple
•          Lead styles include miniature jack, miniature plug, pin leads, standard plugs, stripped lengths, and high and ultra-high temperature plugs.
•          Custom Configuration
•          Industrial Safety Enclosure like Die Cast Aluminium Head or SS Head confirming to IP 65, IP 67 & IS Protection.
•         Head Mount Transmitter Options

Head Mount Non isolated universal temperature transmitter for resistance thermometers (RTD), thermocouples (TC), resistance & voltage (mV) which converts all these data signals into scalable 4 to 20mA analogue output signal.

This is a user programmable temperature transmitter which can be programmed for input signal from ANDROID SMART PHONE or LAPTOP  via data cable & user friendly operating software.

Performance Features:

• 2 wire technology 4 to 20 mA analogue output.
• High accuracy in total ambient temperature range.
• An internal temperature sensor for active temperature compensation.
• Wide voltage supply range.
• Customer specific measurement range setting.
• Simple & user friendly software
• USB Communication

Technical Data

Armored Thermocouple Extension Wires are used for underground applications as GI wire armoring gives strong mechanical protection.

Twisted pairs aluminum mylar shield provides protection against cross talk, static magnetic noise in thermocouple circuits.

THERMOCOUPLE EXTENSION GRADE: T, J, K, N, R, C, B

THERMOCOUPLE COMPENSATING GRADE: T,  K, E, N

Application :

• Utilities Industrial Plants
• Construction of New plants
• Petrochemicals Oil Refineries
• Testing Rig Set Up
• Thermocouple Circuits

Features:

• Temp. Range: 105 °C Rated 300 V
• Flame Retardant
• Moisture, Chemical Solvent Resistant
• Excellent Die Electric Strength
• 100% shield contact for noise reduction
• Armoring supports against strong mechanical abuse
• Excellent Longitudinal strength

Silicone Rubber Insulated 3T Wires for LED Lights

ELTEC is offering SILICONE RUBBER CABLES especially for LED light application with TTT Conductor. Stranded tinned copper wires would be tinned twice and bunched suitably. Silicone Rubber have fine electrical properties, good chemical stability, flame retardant, low smoke emission and excellent resistance to heat and cold.

Silicone rubber has exceptional weather resistance. Ozone created by corona discharge does not deteriorate silicone rubber. Thus, silicone rubber can be exposed to wind, rain and UV rays for longer periods without any change in its physical properties.

ELTEC is offering SILICONE RUBBER CABLES with different type of conductors such as Tin Plated Copper, Nickel Plated Copper, Silver Plated Copper, Bare Copper etc. Silicone Rubber have fine electrical properties, good chemical stability, flame retardant, low smoke emission and excellent resistance to heat and cold.

Silicone rubber has exceptional weather resistance. Ozone created by corona discharge does not deteriorate silicone rubber. Thus, silicone rubber can be exposed to wind, rain and UV rays for longer periods without any change in its physical properties.

In an industrial environment of induced voltage and electrical noise, PVC Insulated twisted overall shielded thermocouple pairs is an ideal selection. Twisted pairs aluminum mylar shield provides protection against cross talk, static magnetic noise in thermocouple circuits.

Cable for Type of THERMOCOUPLE GRADE CALIBRATION: T, J, K, E, N, R, S, B

Thermal Accuracy conforms to AMERICAN Limits of Error ASTM E 230 – ANSI MC 96.1 IEC Thermal Tolerance Class EN 60584 – 2

Application :

• Utililties Industrial Plants
• Construction of New plants
• Petrochemicals Oil Refineries
• Testing Rig Set Up
• Thermocouple Circuits

Features :

• Temp. Range: 105 °C Rated 300 V
• Flame Retardant
• Moisture, Chemical Solvent Resistant
• Excellent Die Electric Strength
• 100% shield contact for noise reduction

FIBER GLASS CABLES

FIBER GLASS WIRES & CABLES are for high temperature applications which has an outstanding and unique combination of electrical, thermal, mechanical & chemical properties. Cable conductors like annealed bare or tinned copper are closely braided with FIBER GLASS Yarn and impregnated with high temperature impregnation.

They are normally recommended for continuous use from 130 to 180 °C with impregnation and up to 500°C without impregnation. FIBER GLASS WIRES are ideal for general application requiring moderate abrasion, moisture resistance & high temperature resistance. It has got superior thermal properties as it dissipates heat faster and high thermal endurance as it cannot be burned.

 ELTEC FIBER GLASS WIRES are manufactured from 0.5 sq.mm to 50 sq.mm

THERMOCOUPLE ORGINAL GRADE WIRE

We manufacture  Thermocouple Wires whose postive & negative leg are fused to forma a thermocouple junction and used directly as THERMOCOUPLE or THERMOCOUPLE ASSEMBLIES manufacturing. Available Thermocouple Calibration: K, J, T, E & N in ORIGINAL GRADE as per table..

CONSTRUCTIONAL DETAILS:

Silicone Rubber Insulation provides superior flexibility, excellent softness, resistant to moisture and can be immersed in water for a longer period of time without much effect on its electrical & mechanical properties. Wide operating temperature range from -55 °C to 180 °C

FIBER GLASS INSULATION is ideal for general application requiring moderate abrasion, moisture resistance & high temperature resistance. Designed for high temperature application in metal industries, forgings, aluminum, plastic processing equipments etc.

T TYPE PTFE INSULATED THERMOCOUPLE WIRE

Type T thermocouple grade wire is commonly used to build the thermocouple probe. It may also be used to build the sensing point and can be used as a T type thermocouple sensor or used in manufacturing thermocouple assemblies or can used to connect to the data loggers via thermocoupole connectors.

R / S TYPE THERMOCOUPLE EXTNENSION FIBER GLASS WIRES are generally used to wire is commonly used to link the thermocouple to control instrumentation or can used to connect to data loggers via thermocouple connectors.

• Available in standard thermocouple calibration such as J, K, T, E, N etc.
• Available in standard RTD 2 Core, 4 Core & 6 Core.
• Compact insulation of high purity MgO, Alumina, Hafina Oxide
• Sheath Material such as SS 316 / SS 310 / Inconel 600
• Simplex & Duplex Configuration.