SHAFT OIL SEAL (85-110-13) MASSEY FERGUSON (VIN-00963)

This is a cassette-style radial shaft oil seal (multi-lip / cassette design) engineered for heavy-duty agricultural and off-road applications where the hub/axle end is exposed to dirt, water and high loads. The cassette configuration provides superior contamination resistance and extended service life compared with simple single-lip seals.

Technical Details

• Inner diameter (ID): 85 mm.
• Outer diameter (OD): 110 mm.
• Width / Height: 13 mm (some cassette variants list an auxiliary height ~14.5 mm).
• Material: NBR (standard) — optional compounds (FKM/Viton) available for high-temp / chemical resistance.
• Design features: Multi-lip sealing geometry, integrated garter spring, metal outer case / cassette housing for press fit.

Typical Applications

• Wheel hub / axle shaft sealing (front/rear hubs, wheel bearings) on tractors, loaders and agricultural machinery.
• Used where a robust dust + oil sealing solution is required (cassette seals protect against ingress of mud, dust and water).
• Cross-referenced for use on systems that use Carraro / Landini hub assemblies — hence the seal appears as the OEM reference 3015275X1 for Massey Ferguson applications.

Massey Ferguson Model Information & Fitment Notes

• Multiple aftermarket and OEM cross-reference catalogues list 3015275X1 (85×110×13) as a Massey Ferguson oil/hub seal and show equivalence with Carraro / Landini part numbers. These listings indicate the seal is used in wheel-hub / axle locations on Massey Ferguson tractors and equipment that employ those hub assemblies.
• Important — model verification: Public vendor pages and seal cross-reference tables do not publish a single authoritative, model-by-model list for every tractor. Because the same seal may be used in different hubs across several MF ranges (and because OEM suffixes/assemblies vary by chassis, axle supplier and year), you should confirm fitment using the vehicle VIN, chassis number or OEM parts fiche before ordering.

Example cross-references & vendors (for procurement)

• Corteco / 12016635B — shown as equivalent to MF 3015275X1.
• Several agricultural-parts suppliers (Landini / Carraro cross-lists) stock this cassette seal for hub applications — typical listings show dimensions and OE refs.

Replacement & Installation Notes

• Replace if oil leakage or contamination is visible at wheel hub or bearing area, or during hub rebuild/overhaul.
• Clean hub bore and shaft; check for scoring—replace or re-machine surfaces as needed before pressing in the cassette.
• Press the cassette squarely to the specified depth; do not deform the outer case or seal lips.
• If vehicle operates in extremely abrasive or high-temperature conditions, consider premium elastomer (FKM) option.

Oil Shaft / Cassette Seal — 85×110×13 (Massey Ferguson OEM 3015275X1). Heavy-duty hub cassette seal, Carraro/Landini/MF cross-reference; ideal for wheel hub and axle applications where contamination resistance is critical.