M0095 Long Stroke 25 kN Roofing Screw Tester Kit with 80 mm Extraction Stroke

Hydrajaws M0095 Long Stroke Tester Kit is configured for determining strength and suitability of fixings in built-up roofing construction. The 80 mm stroke allows the tested fixing to be completely extracted after loading. Buyers should align the kit configuration with the exact test objective, specimen or fixing, load requirement,.

Maximum tensile load is stated as 25 kN, while pressure on roofing material is stated below 1 N/mm² at a 10 kN load. No gauge is included; use with a Hydrajaws standard digital gauge that must be purchased separately. Confirm the required capacity, display units, calibration status, and digital reporting.

The arrangement uses a cylindrical load-spreading bridge, 80 mm stroke tester frame, operating rod, top plate, handle assembly, capsule, and hydraulic body coupler. The stated arrangement should be checked against access, reaction support, connection geometry, available stroke, and the specific item being tested.

Adaptors include six threaded buttons, six slotted buttons, and pulling plates of 6.5, 8.0, 16.5, and 20 mm for stated fixing types. Confirm every required adaptor, tool, consumable, gauge, case, certificate, and operating document because optional or separately purchased components may apply.

No specific testing standard is stated for this roofing screw tester in the supplied information. Buyers should confirm the current edition, applicability, test method, sampling, acceptance criteria, competent-person responsibilities, calibration, reporting, and commercial requirements before ordering.

FAQs

• What is this kit intended to test? determining strength and suitability of fixings in built-up roofing construction. The exact test item, connection, base material, and acceptance procedure should be confirmed before use.
• What maximum load is stated? Maximum tensile load is stated as 25 kN, while pressure on roofing material is stated below 1 N/mm² at a 10 kN load. Confirm that the selected kit and gauge capacity match the required project.
• Is a digital gauge included? No gauge is included; use with a Hydrajaws standard digital gauge that must be purchased separately. Buyers should verify the supplied gauge, display units, charging arrangement, app compatibility, and calibration certificate.
• Which components are supplied? Adaptors include six threaded buttons, six slotted buttons, and pulling plates of 6.5, 8.0, 16.5, and 20 mm for stated fixing types. The final packing list and any optional or separately purchased parts should be.
• Which standards or guidance are referenced? No specific testing standard is stated for this roofing screw tester in the supplied information. Confirm the current edition and whether it applies to the intended test and jurisdiction before use.
• What should be checked before testing? Confirm the item, material, connection, access, reaction arrangement, load schedule, adaptor, calibration, reporting, acceptance criteria, and responsible personnel.
• What should buyers request in a quotation? Request the exact kit configuration, capacity, adaptors, gauge, certificate, case, documentation, optional components, lead time, price, and support terms.