vhydromet

“Virtual Hydromet” make Water Level Sounder is a reliable instrument for measuring the water level and total depth in boreholes, wells, reservoirs etc. For the measurement the bob is lowered to the water level. When touching the level, a sensor effects the illumination of a signal lamp & an additional acoustic signal will be released by a buzzer.

“Virtual Hydromet” make Water Level Sounder is a reliable instrument for measuring the water level and total depth in boreholes, wells, reservoirs etc. For the measurement the bob is lowered to the water level. When touching the level, a sensor effects the illumination of a signal lamp & an additional acoustic signal will be released by a buzzer.

“Virtual” make Ground Water Level Recorder (Piezometer) is reflect state of the art in micro controller based instrumentation design. The Water Level sensor can be attached with this IP65 data logger for the collection of real time data automatically. The micro controller has its internal memory along with, a real time clock with an LCD (16 X 2) to display the instrument status. Piezo-resistive silicon strain gauge, bounded to 316 SS diaphragm and integral cable contain a vent tube for Barometric pressure compensation. Comes with different ranges 10, 20, 50, 70, 100, 200, 300 meters. Data file is saved in Microsoft’s Excel. This instrument is used for ground / wells water level monitoring.

“Virtual” make Ground Water Level Recorder (Piezometer) is reflect state of the art in micro controller based instrumentation design. The Water Level sensor can be attached with this IP65 data logger for the collection of real time data automatically. The micro controller has its internal memory along with, a real time clock with an LCD (16 X 2) to display the instrument status. Piezo-resistive silicon strain gauge, bounded to 316 SS diaphragm and integral cable contain a vent tube for Barometric pressure compensation. Comes with different ranges 10, 20, 50, 70, 100, 200, 300 meters. Data file is saved in Microsoft’s Excel. This instrument is used for ground / wells water level monitoring. 

“Virtual” make Ground Water Level Recorder (Piezometer) is reflect state of the art in micro controller based instrumentation design. The Water Level sensor can be attached with this IP65 data logger for the collection of real time data automatically. The micro controller has its

internal memory along with, a real time clock with an LCD (16 X 2) to display the instrument status. Piezo-resistive silicon strain gauge, bounded to 316 SS diaphragm and integral cable contain a vent tube for Barometric pressure compensation. Comes with different ranges 10, 20, 50, 70, 100, 200, 300 meters. Data file is saved in Microsoft’s Excel. This instrument is used for ground / wells water level monitoring. 

“Virtual” make Ground Water Level Recorder (Piezometer) is reflect state of the art in micro controller based instrumentation design. The Water Level sensor can be attached with this IP65 data logger for the collection of real time data automatically. The micro controller has its

internal memory along with, a real time clock with an LCD (16 X 2) to display the instrument status. Piezo-resistive silicon strain gauge, bounded to 316 SS diaphragm and integral cable contain a vent tube for Barometric pressure compensation. Comes with different ranges 10, 20, 50, 70, 100, 200, 300 meters. Data file is saved in Microsoft’s Excel. This instrument is used for ground / wells water level monitoring. 

“Virtual” make Automatic Tide Gauge reflect state of the art in micro controller based instrumentation design. The Two Level sensor (One each Non-contact Radar Type and contact pressure type sensors) can be attached with this data logger for the collection of real time data automatically. The micro controller has its internal memory along with, a real time clock with an LCD (16 X 2) to display the instrument status. Data file is saved in Microsoft’s Excel.

“Virtual Hydromet” make Water Level Sounder is a reliable instrument for measuring the water level and total depth in boreholes, wells, reservoirs etc. For the measurement the bob is lowered to the water level. When touching the level, a sensor effects the illumination of a signal lamp & an additional acoustic signal will be released by a buzzer.

“Virtual Hydromet” make Water Level Sounder is a reliable instrument for measuring the water level and total depth in boreholes, wells, reservoirs etc. For the measurement the bob is lowered to the water level. When touching the level, a sensor effects the illumination of a signal lamp & an additional acoustic signal will be released by a buzzer.

“Virtual Hydromet” make Water Level Sounder is a reliable instrument for measuring the water level and total depth in boreholes, wells, reservoirs etc. For the measurement the bob is lowered to the water level. When touching the level, a sensor effects the illumination of a signal lamp & an additional acoustic signal will be released by a buzzer.

The suspended solids Indicator (Model: IPM) is a state of the art, easy to use meter that provides many benefits to the plant operations staff. It is a unique system that combines advanced electronics with a solid-state, optical sensor. It is a multi-range indicator designed for the measurement of suspended solids in aqueous solutions. The microprocessor-based electronics of the indicator provide a high degree of flexibility and ease of use. Data logging and the ability to download the data directly to a computer are optional features.

The staff gauge is used for a quick visual indication of the surface level in reservoirs, rivers, streams, irrigation channels, weirs and flumes, and wherever accuracy and readability are important. These environmentally rugged gauges are finished with a special lacquer to insure easy reading and resist rust or discoloration. They virtually never need replacement under normal conditions. Each gauge is accurately graduated and has grommeted holes for easy fastening to walls, piers, poles and other structures.

The staff gauge is used for a quick visual indication of the surface level in reservoirs, rivers, streams, irrigation channels, weirs and flumes,

and wherever accuracy and readability are important. These environmentally rugged gauges are finished with a special lacquer to insure

easy reading and resist rust or discoloration. They virtually never need replacement under normal conditions. Each gauge is accurately

graduated and has grommeted holes for easy fastening to walls, piers, poles and other structures.

These are medium-weight suspended-sediment samplers for hand line or sounding reel suspension. The DH-59 sampler comprises a streamlined bronze casting, 15 inches (38 cm) long, which partially encloses a pint-size (0.47-liter) sample container (sold separately). This sampler weighs approximately 22 pounds (10 kg), and is equipped with a tail vane assembly to orient the intake nozzle of the sampler into the approaching flow as the sampler enters the water.

The Dual Channel Analyzer (DCA) is a unique system that combines advanced electronics with solid-state, smart sensors. The analyzer will accept any combination of two standard SS sensors and automatically configures for the correct operation. The system allows for flexible and economical process monitoring and control. 

This is a non-contact flow meter for open water channels mounted above the water surface. It uses a radar velocity sensor and an ultrasonic sensor for water level measurement. The two measurements and the dimensions of the cross section profile are used to calculate the discharge from the continuity equation (velocity area method). The modular transmitter incorporates a flow computer with all required algorithms and software to ensure accuracy and repeatability of flow measurements. Parameterization of the measurement site, data logging, visualisation and data transfer is possible by using the browser based control and management user interface, which can be run in any standard web browser via PC, notebook, tablet or smart phone, regardless of location, time and operating system. The transmitter can be mounted in a distance up to 100 m from the measuring site with the velocity and level sensors.

The staff gauge is used for a quick visual indication of the surface level in reservoirs, rivers, streams, irrigation channels, weirs and flumes, and wherever accuracy and readability are important. These environmentally rugged gauges are finished with a special lacquer to insure easy reading and resist rust or discoloration. They virtually never need replacement under normal conditions. Each gauge is accurately graduated and has grommeted holes for easy fastening to walls, piers, poles and other structures.

The staff gauge is used for a quick visual indication of the surface level in reservoirs, rivers, streams, irrigation channels, weirs and flumes, and wherever accuracy and readability are important. These environmentally rugged gauges are finished with a special lacquer to insure easy reading and resist rust or discoloration. They virtually never need replacement under normal conditions. Each gauge is accurately graduated and has grommeted holes for easy fastening to walls, piers, poles and other structures.

“Virtual” make Digital Water Level Recorder (Float type) reflect state of the art in micro controller based instrumentation design. The Shaft encoder type water level sensor attached with this data logger for the collection of real time data automatically. The micro controller has its internal memory along with, a real time clock with an LCD (16 X 2) to display the instrument status. Comes with standard range 10 meters. Data file is saved in Microsoft’s Excel. A durable hard enclosure protects the data logger from weathering. This instrument is used for ground / wells water level monitoring. This instrument can also be used for Open channel, Dam and Lake level monitoring.

“Virtual” make Ground Water Level Recorder (Piezometer) is reflect state of the art in micro controller based instrumentation design. The Water Level sensor can be attached with this IP65 data logger for the collection of real time data automatically. The micro controller has its internal memory along with, a real time clock with an LCD (16 X 2) to display the instrument status. Piezo-resistive silicon strain gauge, bounded to 316 SS diaphragm and integral cable contain a vent tube for Barometric pressure compensation. Comes with different ranges 10, 20, 50, 70, 100, 200, 300 meters. Data file is saved in Microsoft’s Excel. This instrument is used for ground / wells water level monitoring. 

“Virtual” make Automatic Water Level Recorder (Radar type) reflect state of the art in micro controller based instrumentation design. The Radar Level sensor can be attached with this IP65 data logger for the collection of real time data automatically. It comes with facility to transport Data from Data Logger to a P.C. through various modes (As per Customer requirement). 16x2 LCD alphanumeric display and 4x2 membrane keypad is provided at front panel of data logger for programming data logger and monitoring sensor reading at site without the help of computer.

This is a 18 kg (approximate) cable-suspended bed load sampler with 3" x 3" (76 mm x 76 mm) opening and 1.4 expansion ratio. A tailfin arrangement provides flow direction orientation and sliding collar allows adjustment of balance point based on stream flow conditions. The collar is set so that the sampler will touch the water tail first to aid in rapid orientation with the streamlines of flow. This suspension attitude also insures that the sampler orifice will lift up immediately when the unit is raised from the bed to eliminate loss of sample.

The ground water sampler (Model: GWS-1) has technically been designed for the application in connection with the water level indicator. With this combination-design, it is possible to obtain liquid samples from any desired depth. Basically, the liquid sampler consists of three parts - piston, tube and releasing weight. In order to get a liquid sample, the tube is hooked above the piston first and then lowered. When the desired sampling depth is reached by means of the measuring tape, the weight on top is released, which slides downwards along the cable to the top of the tube. 

This is a lightweight sampler for collection of suspended-sediment samples where wading rod sampler suspension is used. The sampler consists of a streamlined aluminum casting, 13 inches (33 cm) long, which partially encloses a pint (0.47 liter) sample container (sold separately). The sampler weights 4.5 pounds (2 kg) including sample container. A standard 1/2 inch (1.27 cm) wading rod is threaded into the top of the sampler body for suspending the sampler