TILE PROOF DIAMOND 455 – High Polymer Modified Tile Adhesive

Product Overview

TILE PROOF DIAMOND 455 (Grey/White) is a premium, high-performance, polymer-modified cement-based tile adhesive specially developed for vitrified tiles, porcelain tiles, large-format vitrified slabs and big-size tiles.

Its enhanced bonding strength and flexibility make it suitable for demanding tile installation projects, including large-format, heavy-duty and tile-on-tile applications. DIAMOND 455 is suitable for both internal and external wall and floor applications.

The product is designed to provide reliable adhesion and durable performance where higher-performance tile fixing is required.

Key Features & Benefits

• Premium high-performance polymer-modified adhesive

• C2TES1 classified tile adhesive

• Suitable for internal and external applications

• Suitable for vitrified and porcelain tiles

• Designed for large-format and big-size tiles

• Suitable for large vitrified slabs

• Suitable for all-size floor tile applications, subject to suitable substrate conditions

• Suitable for tile-on-tile applications

• High bonding strength

• Enhanced flexibility for demanding installations

• Excellent adhesion and reliable performance

• Ready to mix and easy to apply

• Suitable for demanding construction and renovation projects

Applications

TILE PROOF DIAMOND 455 is suitable for:

• Vitrified tile fixing

• Porcelain tile fixing

• Large-format tile installation

• Large vitrified slab installation

• Big-size floor tiles

• Large-format wall tiles

• Tile-on-tile applications

• Internal wall and floor applications

• External wall and floor applications

• High-performance tiling projects

• Residential and commercial construction

• Renovation and refurbishment projects

Recommended Tile Sizes

Floor Applications

All sizes accepted, subject to proper substrate preparation, adhesive coverage and appropriate installation conditions.

Wall Applications

Suitable for large-format wall tiles and slabs, including:

• 1200 × 2400 mm

• 1800 × 1200 mm

For exceptionally large, heavy or technically demanding tiles and slabs, consult TILE PROOF for product selection and installation guidance.

Product Classification

Type: C2TES1
Appearance: Grey/White Powder
Base: High Polymer-Modified Cement-Based Adhesive
Packaging: 20 kg Bag

Technical Specifications

Coverage

At an approximate 3 mm adhesive bed thickness, coverage is approximately 4.5–5 m² per 20 kg bag.

Actual coverage may vary depending on:

• Substrate condition

• Surface smoothness

• Tile size and type

• Trowel size and application technique

• Adhesive thickness

• Site conditions

For large-format tiles and slabs, adhesive consumption may be higher depending on the required coverage and installation method.

Mixing

Mix approximately 4 litres of clean water with one 20 kg bag of TILE PROOF DIAMOND 455.

Add the powder gradually to the measured clean water and mix thoroughly until a smooth, homogeneous and lump-free consistency is achieved.

Use appropriate mixing equipment and application practices to obtain a uniform adhesive mixture.

Application

Before application, ensure that the substrate is clean, sound, dry and free from dust, dirt, oil, grease, loose particles and other contaminants.

Apply the prepared adhesive evenly using a suitable notched trowel. For large-format tiles and slabs, ensure adequate adhesive coverage and firm contact between the tile and substrate.

Appropriate installation techniques should be followed for large, heavy and special-format tiles. Proper substrate preparation and sufficient adhesive coverage are essential for achieving optimum bonding performance.

Storage & Shelf Life

Shelf Life: 12 months from the date of manufacture when stored in unopened original packaging.

Store in a dry and covered area, protected from moisture, water and adverse environmental conditions.

Keep the bag properly sealed until ready for use.

Packaging

20 kg Bag

Export Product Highlights

TILE PROOF DIAMOND 455 is a premium solution for international construction, tile installation, flooring, wall cladding and renovation markets.

Its high-performance polymer-modified formulation makes it suitable for distributors, importers, construction companies, contractors, tile installers, architects and project buyers seeking reliable adhesive solutions for vitrified tiles, porcelain tiles and large-format slabs.

Product Category: Construction Chemicals / Tile Adhesives
Product Type: High Polymer-Modified Cement-Based Tile Adhesive
Classification: C2TES1
Colour: Grey/White
Packaging: 20 kg Bag
Applications: Wall & Floor Tile Fixing
Suitable Tile Types: Vitrified, Porcelain, Large-Format Tiles & Slabs
Application: Internal & External
Suitable Markets: Residential, Commercial & Infrastructure Construction

Important Note

Coverage and technical performance may vary depending on substrate condition, surface smoothness, tile size and type, application method, adhesive thickness and site conditions.

For large-format, heavy, unusual or technically demanding applications, consult TILE PROOF for appropriate product selection and technical guidance. Proper substrate preparation, correct adhesive application and adequate tile coverage are essential for optimum performance.

TILE PROOF SILVER 155 – High Polymer Modified Tile Adhesive

Product Overview

TILE PROOF SILVER 155 (Grey) is a high-performance, polymer-modified cement-based tile adhesive developed for reliable and durable fixing of wall and floor tiles. It is suitable for interior and exterior applications, new flooring, and tile-on-tile installations.

The adhesive provides strong bonding, good workability and reliable adhesion for residential, commercial and general construction applications. It is particularly suitable for a wide range of commonly used wall and floor tiles.

For specialized, large-format or demanding applications, a higher-performance TILE PROOF adhesive may be recommended depending on project requirements.

Key Features

• High polymer-modified cement-based tile adhesive

• Strong and reliable tile bonding

• Suitable for interior and exterior applications

• Suitable for new flooring and tile-on-tile applications

• Easy to mix and apply

• Good workability and adhesion

• Suitable for wall and floor tile installations

• Grey powder formulation

• Suitable for residential and general construction projects

• Available in convenient 20 kg packaging

Applications

TILE PROOF SILVER 155 is suitable for:

• Wall tile fixing

• Floor tile fixing

• New flooring

• Tile-on-tile applications

• Interior tiling

• Exterior tiling

• Residential construction

• Commercial construction

• General renovation and tiling projects

Recommended Tile Sizes

Floor Applications

• 300 × 450 mm

• 300 × 600 mm

• 600 × 600 mm

• 800 × 800 mm

• 600 × 1200 mm

Wall Applications

• 300 × 300 mm

• 300 × 450 mm

• 300 × 600 mm

Technical Specifications

Coverage

At an approximate 3 mm adhesive bed thickness, coverage is approximately 4.5–5 m² per 20 kg bag.

Actual coverage may vary according to substrate condition, surface smoothness, tile size, application method and adhesive thickness.

Mixing

Mix approximately 4 litres of clean water with one 20 kg bag of TILE PROOF SILVER 155.

Add the powder gradually to clean water and mix thoroughly until a smooth, uniform and lump-free consistency is achieved. Allow the mixture to settle as recommended and remix before application where required.

Application

The substrate should be clean, sound, dry and free from dust, dirt, oil, grease and loose materials.

Apply the prepared adhesive evenly over the substrate using an appropriate notched trowel. Place the tiles while the adhesive remains within its recommended open time and ensure adequate contact between the tile and adhesive.

Proper substrate preparation and correct installation practices are essential for achieving optimum bonding performance.

Storage & Shelf Life

Shelf Life: 12 months from the date of manufacture when stored in unopened original packaging.

Store in a dry, covered and moisture-protected area. Keep the packaging properly sealed until use and protect the product from unsuitable environmental conditions.

Packaging

20 kg Bag

Export Product Highlights

TILE PROOF SILVER 155 is a practical tile adhesive solution for international construction, renovation, flooring and wall tiling requirements. Its polymer-modified cement-based formulation, reliable bonding performance and versatile application range make it suitable for distributors, contractors, builders, tile installers and construction-material buyers.

Product Category: Construction Chemicals / Tile Adhesives
Product Type: Polymer-Modified Cement-Based Tile Adhesive
Colour: Grey
Packaging: 20 kg Bag
Application: Wall & Floor Tile Fixing
Suitable Markets: Residential, Commercial & General Construction

Important Note

Product performance and coverage may vary depending on substrate condition, tile type, surface smoothness, application technique, adhesive thickness and site conditions. For large-format, unusual or technically demanding applications, consult TILE PROOF for appropriate product selection and installation guidance.

TILE PROOF STONE 555 – Premium Water & Frost Resistant Tile Adhesive

Product Overview

TILE PROOF STONE 555 (White) is a premium, highly polymer-modified, cement-based wall and floor tile adhesive specially developed for demanding tile and natural stone installations.

Its advanced formulation provides excellent bonding performance along with water and frost resistance, making it suitable for both interior and exterior applications and for areas exposed to moisture, temperature variations and demanding environmental conditions.

STONE 555 is designed for fixing a wide range of tile and stone materials, including large-format vitrified slabs, vitrified tiles, porcelain tiles, ceramic tiles, glass mosaics and natural stone.

It is also suitable for the installation of marble, granite, quartz stone, terrazzo, window sills, marble steps and other natural stone materials.

Key Features & Benefits

• Premium highly polymer-modified cement-based adhesive

• Excellent water resistance

• Excellent frost resistance

• Suitable for interior and exterior applications

• Suitable for large-format tiles and slabs

• Suitable for vitrified and porcelain tiles

• Suitable for ceramic tiles and glass mosaics

• Suitable for natural stone installations

• Suitable for marble, granite and quartz stone

• Suitable for terrazzo and marble steps

• Suitable for window sills and stone applications

• Strong and reliable bonding performance

• Suitable for demanding and moisture-exposed environments

• Suitable for swimming pools and wet areas

• Suitable for applications exposed to temperature variations

• Suitable for renovation and new construction projects

Applications

TILE PROOF STONE 555 is suitable for:

• Large-format vitrified slab fixing

• Vitrified tile fixing

• Porcelain tile fixing

• Ceramic tile fixing

• Glass mosaic installation

• Natural stone fixing

• Marble installation

• Granite installation

• Quartz stone installation

• Terrazzo installation

• Marble steps

• Window sills

• Interior wall and floor applications

• Exterior wall and floor applications

• Swimming pools and moisture-exposed areas

• Demanding residential and commercial installations

• New construction and renovation projects

Suitable Materials

STONE 555 can be used for fixing a wide range of tile and stone materials, including:

• Vitrified tiles

• Large-format vitrified slabs

• Porcelain tiles

• Ceramic tiles

• Glass mosaics

• Marble

• Granite

• Quartz stone

• Terrazzo

• Natural stone

• Other suitable stone and tile materials

Performance Advantages

The highly polymer-modified formulation of STONE 555 provides enhanced adhesion and durability compared with conventional cement-based tile adhesives.

Its water- and frost-resistant properties make it particularly suitable for installations where the adhesive may be exposed to moisture, wet conditions or temperature fluctuations.

For large-format slabs, natural stone and technically demanding installations, proper substrate preparation, adhesive coverage and installation procedures are essential for achieving optimum performance.

Product Classification

Product Type: Premium Highly Polymer-Modified Cement-Based Tile & Stone Adhesive
Colour: White
Application: Wall & Floor
Suitable Use: Interior & Exterior
Performance: Water Resistant & Frost Resistant
Packaging: 20 kg Bag

Technical Specifications

Application Guidelines

The substrate should be clean, sound, dry and free from dust, dirt, oil, grease, loose particles and other contaminants before application.

Prepare the adhesive according to the recommended mixing procedure and mix thoroughly until a smooth and uniform consistency is achieved.

Apply the adhesive evenly to the prepared substrate using a suitable notched trowel. For large-format tiles, slabs and natural stone, ensure adequate adhesive coverage and firm contact between the substrate and the tile or stone.

For heavy, large-format or special stone installations, appropriate installation techniques should be followed to ensure proper support and bonding.

Storage & Shelf Life

Store the product in a dry, covered and moisture-protected area.

Keep the original packaging properly sealed until use and protect the product from water, moisture and unsuitable environmental conditions.

Shelf Life: 12 months from the date of manufacture when stored in unopened original packaging under recommended storage conditions.

Packaging

20 kg Bag

Export Product Highlights

TILE PROOF STONE 555 is a premium construction chemical solution suitable for international tile, stone, flooring, wall cladding, swimming pool and renovation markets.

Its combination of high polymer modification, water resistance and frost resistance makes it suitable for importers, distributors, contractors, builders, tile installers, stone professionals and construction-material buyers looking for a versatile adhesive for demanding tile and natural stone applications.

Product Category: Construction Chemicals / Tile & Stone Adhesives
Product Type: Premium Highly Polymer-Modified Adhesive
Colour: White
Packaging: 20 kg Bag
Applications: Wall & Floor
Suitable Materials: Vitrified, Porcelain, Ceramic, Glass Mosaic & Natural Stone
Special Properties: Water Resistant & Frost Resistant
Suitable Environment: Interior & Exterior
Key Markets: Construction, Renovation, Flooring, Wall Cladding, Stone Installation & Swimming Pools

TILE PROOF PLATINUM 355 – High Polymer Modified Tile Adhesive

Product Overview

TILE PROOF PLATINUM 355 (Grey) is a high-performance, polymer-modified cement-based tile adhesive specially formulated for the installation of vitrified tiles, porcelain tiles, large-format vitrified slabs and big-size tiles on walls and floors.

Its high bonding strength and reliable performance make it suitable for demanding tile installation projects, including large-format tile applications and tile-on-tile installations. The product is designed for both interior and exterior applications.

PLATINUM 355 provides a practical solution for construction, renovation and refurbishment projects requiring reliable adhesion for large-format and high-performance tile installations.

Key Features & Benefits

• High-performance polymer-modified cement-based adhesive

• C2TE classified tile adhesive

• Suitable for interior and exterior applications

• Designed for large-format and big-size tiles

• Suitable for vitrified and porcelain tiles

• Suitable for large vitrified slabs

• High bonding strength

• Suitable for tile-on-tile applications

• Suitable for wall and floor installations

• Ready to mix and easy to apply

• Suitable for demanding tiling projects

• Suitable for new construction and renovation applications

Applications

TILE PROOF PLATINUM 355 is suitable for:

• Vitrified tile fixing

• Porcelain tile fixing

• Large-format tile installation

• Large vitrified slab fixing

• Big-size tile installation

• Floor tile applications

• Wall tile applications

• Tile-on-tile applications

• Interior tiling

• Exterior tiling

• Residential construction

• Commercial construction

• Renovation and refurbishment projects

• Large-format and demanding tiling applications

Recommended Tile Sizes

Floor Applications

Suitable for:

• 600 × 1200 mm

• 800 × 1600 mm

• 1200 × 1800 mm

• 1200 × 2400 mm

• 1600 × 3200 mm

Wall Applications

Suitable for:

• 800 × 1600 mm

• 800 × 2400 mm

• 1200 × 1200 mm

For exceptionally large, heavy or technically demanding installations, consult TILE PROOF for appropriate product selection and installation guidance.

Product Classification

Type: C2TE
Appearance: Grey/White Powder
Base: High Polymer-Modified Cement-Based Adhesive
Packaging: 20 kg Bag

Technical Specifications

Coverage

At an approximate 3 mm adhesive bed thickness, coverage is approximately 4.5–5 m² per 20 kg bag.

Actual coverage may vary depending on substrate condition, surface smoothness, tile size and type, application method, adhesive thickness and site conditions.

Large-format tiles and slabs may require additional adhesive depending on substrate flatness, trowel configuration and required coverage.

Mixing

Mix approximately 4 litres of clean water with one 20 kg bag of TILE PROOF PLATINUM 355.

Add the powder gradually to clean water and mix thoroughly until a smooth, homogeneous and lump-free consistency is achieved.

Use the prepared adhesive according to recommended application practices.

Application Guidelines

The substrate should be clean, sound and free from dust, dirt, oil, grease, loose particles and other contaminants before application.

Prepare the adhesive using the recommended quantity of clean water and mix thoroughly to obtain a uniform consistency.

Apply the adhesive evenly onto the prepared substrate using a suitable notched trowel. For large-format tiles and slabs, ensure adequate adhesive coverage and proper contact between the tile and substrate.

For large or heavy tiles, follow appropriate installation procedures to ensure proper support, alignment and bonding.

Storage & Shelf Life

Shelf Life: 12 months from the date of manufacture when stored in unopened original packaging.

Store in a dry, covered and moisture-protected area, away from unsuitable environmental conditions.

Keep the product properly sealed until ready for use.

Packaging

20 kg Bag

Export Product Highlights

TILE PROOF PLATINUM 355 is a high-performance construction chemical suitable for international tile installation, flooring, wall cladding, renovation and building-material markets.

Its polymer-modified formulation and high bonding strength make it suitable for importers, distributors, contractors, builders, tile installers, construction companies and project buyers requiring an adhesive solution for vitrified tiles, porcelain tiles and large-format slabs.

Product Category: Construction Chemicals / Tile Adhesives
Product Type: High Polymer-Modified Cement-Based Tile Adhesive
Classification: C2TE
Colour: Grey/White
Packaging: 20 kg Bag
Applications: Wall & Floor Tile Fixing
Suitable Tile Types: Vitrified, Porcelain, Large-Format Tiles & Slabs
Application: Interior & Exterior
Special Application: Tile-on-Tile
Suitable Markets: Residential, Commercial, Construction & Renovation

TILE PROOF NSA GOLD 255 – High Polymer Modified Cement-Based Tile Adhesive

Product Overview

TILE PROOF NSA GOLD 255 (Grey) is a high-performance, polymer-modified cement-based tile adhesive specially developed for reliable fixing of vitrified tiles, porcelain tiles and tiles over existing tile surfaces.

It is suitable for both internal and external wall and floor applications and is formulated to provide strong, durable and reliable adhesion in demanding tiling conditions.

NSA GOLD 255 is a practical solution for new construction, renovation and tile-on-tile projects where enhanced bonding performance is required.

Key Features & Benefits

• High-performance polymer-modified cement-based adhesive

• C2T classified tile adhesive

• Suitable for internal and external applications

• Excellent bonding strength

• Suitable for vitrified and porcelain tiles

• Suitable for tile-on-tile applications

• Suitable for wall and floor installations

• Ready to mix and easy to use

• Reliable and durable tile fixing

• Suitable for demanding tiling applications

• Suitable for new construction and renovation projects

Applications

TILE PROOF NSA GOLD 255 is suitable for:

• Wall tile fixing

• Floor tile fixing

• Vitrified tile installation

• Porcelain tile installation

• Tile-on-tile applications

• Interior tiling

• Exterior tiling

• Residential construction

• Commercial construction

• Renovation and refurbishment projects

• Demanding and high-performance tiling applications

Recommended Tile Sizes

Floor Applications

Suitable for:

• 600 × 600 mm

• 800 × 800 mm

• 600 × 1200 mm

• 800 × 1600 mm

• 1200 × 1200 mm

Wall Applications

Suitable for:

• 600 × 600 mm

• 600 × 1200 mm

For unusually large, heavy or technically demanding installations, consult TILE PROOF for appropriate product selection and technical guidance.

Product Classification

Type: C2T
Appearance: Grey Powder
Base: Polymer-Modified Cement-Based Adhesive
Packaging: 20 kg Bag

Technical Specifications

Coverage

At an approximate 3 mm adhesive bed thickness, coverage is approximately 4.5–5 m² per 20 kg bag.

Actual coverage may vary depending on:

• Substrate condition

• Surface smoothness

• Tile type and size

• Application technique

• Adhesive thickness

• Site conditions

Mixing

Mix approximately 4 litres of clean water with one 20 kg bag of TILE PROOF NSA GOLD 255.

Add the powder gradually to clean water and mix thoroughly until a smooth, homogeneous and lump-free consistency is achieved.

Use the prepared adhesive according to recommended application procedures.

Application Guidelines

The substrate must be clean, sound and free from dust, dirt, oil, grease, loose particles and other contaminants before application.

Prepare the adhesive with the recommended quantity of clean water and mix thoroughly to obtain a uniform consistency.

Apply the adhesive evenly using a suitable notched trowel. For tile-on-tile installations, ensure that the existing tiled surface is properly prepared, sound, clean and suitable for receiving the new adhesive and tiles.

Ensure adequate adhesive coverage and proper contact between the tile and substrate for reliable bonding.

Storage & Shelf Life

Shelf Life: 12 months from the date of manufacture when stored in unopened original packaging.

Store in a dry, cool and covered area, protected from moisture, water and adverse environmental conditions.

Keep the product sealed until ready for use.

Packaging

20 kg Bag

Export Product Highlights

TILE PROOF NSA GOLD 255 is a high-performance construction chemical designed for international tile installation, flooring, wall tiling, renovation and refurbishment markets.

Its polymer-modified formulation and strong bonding performance make it suitable for importers, distributors, contractors, builders, tile installers and construction-material buyers seeking a reliable adhesive for vitrified, porcelain and tile-on-tile applications.

Product Category: Construction Chemicals / Tile Adhesives
Product Type: High Polymer-Modified Cement-Based Tile Adhesive
Classification: C2T
Colour: Grey
Packaging: 20 kg Bag
Applications: Wall & Floor Tile Fixing
Suitable Tile Types: Vitrified & Porcelain Tiles
Special Application: Tile-on-Tile
Application: Interior & Exterior
Suitable Markets: Residential, Commercial, Construction & Renovation

Important Note

Coverage and performance may vary depending on substrate condition, surface smoothness, tile type and size, application method, adhesive thickness and site conditions.

Proper substrate preparation and correct application procedures are essential for optimum bonding performance.

For special, large, difficult or demanding applications, consult TILE PROOF for appropriate product selection and technical guidance.