Riddhi Enterprise

Flashband is a self-adhesive sealing strip which bonds instantly to provide a permanent watertight seal.

Flashband is easily applied using hand pressure only, with no requirement for special equipment for cutting, forming or fixing. Flashband bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt, glass, rigid plastics and more.

Porous surfaces need to be primed with a Flashband primer. Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, and repairing roofing felt joints on flat roofs.

Specifications:

Max Flow Rate: 7.6 LPM

Max Pressure : 3300 PSI

Motor Power : 4000V

Max Tip Size : 43 Thou

Airless Spray Painting Machine

Max Pressure - 3000 psi

Motor Power - 900 V

Max Tip Size - 21 Thou

Max Flow Rate - 2.01 LPM

Airless Spray Painting Machine

Max Pressure - 300 psi

Motor Power - 1300 W

Max Tip Size - 21 thou

Max Flow Rate - 2.3 LPM

Airless Spray Painting Machine 

Max Pressure - 3250 psi

Motor Power - 4000 V

Max Tip Size - 43 Thou

Max Flow Rate - 7.31 LPM

Acrylic Water Base

Feature

- Double component type grouting pump with high performance(Running by electric motor).

- Pump discharges with accurate 1:1 mixing ratio.

- It is developed for using rapidly-hardening type product.

- It is possible to adjust hardening time by controlling the catalyst amount.

- It is easy to use and move(Portable, 29kg) at job site, and wheel-stopper makes no-move at slope.

- After using, it is easy cleaning up, just by using water.

- It is easy to change spare parts.

- All parts contacting with acryl is made stainless steel.

Injection Grouting Chemical

EXTRA-RAPID SETTING MORTAR for Repair

Feature

- Waterstop

- Quick setting

- Sealing water leaks in 2~3 minutes

- Suitable for vertical and horizontal concrete surfaces

- Non toxic

- CRM-120’s applicable temperature is +5℃~+30℃.

- May be differ the curing time according to temperature and

humidity at the construction site.

- It is recommended to store the materials in a cool place.

During the summer season and maintain water temperature

lower prior to using.

- If necessary, take appropriate measures, e.g. Use warm water

if ambient temperature is low.

- Do not add additives or any other dusts with CRM-120.

- CRM-120 contains cement and produces an alkaline reaction

with water. So protect skin and eye's during application.

If contact occurs, wash thoroughly with water.

CRP-105

Carbon Fiber Primer

Carbon Fiber Epoxy Primer CRP-105

contains epoxy resin and Polyamide as

primary substances. It has a short pot life

and has excellent chemical and water

resistance. It penetrates to concrete

 surface to strengthen adhesion

performance.

Carbon Fiber Resin

Injection Grouting Chemical

Carbon Fiber Epoxy Resin CRR-100 is a

reinforcing epoxy resin which can increase

the performance of carbon fiber with the

outstanding resistance to chemical and water.

It is suitable for structural reinforcement as it

offers a compelling adhesion performance on

concrete and carbon fiber sheet. 

Double Component Type High Strength Polyurethane Water Stop Material

CY-505 is Double component type hydrophobic polyurethane resin that 

cuts off water from cracks and reinforces the maintenance

works on concrete structures, subways and tunnels.

It is a low expansion water stop reinforcing agent of which

the water reaction expansion ratio is minimized.

Compared to conventional polyurethane water stop

materials, it is stronger and its hardened foam is

more rigid. It does not generates defects

by foam deformation and

it provides virtually permanent

water stop effect.

CY-101

Single Component Hydrophilic Polyurethane

Injection Grouting Chemical

CY-101 Hydrophilic Polyurethane Grouting is

used to stop leaks and fill underground voids.

CY-101 is a polymer solution which cures

when reacted with water,

CY-101 can stop the water,

it can stop or slow the deterioration of

steel bar or other internal features of

the concrete. This success is due to

the placement of CY-101

throughout the depth of the crack.

CYH-202

Single Component Semi-rigid Polyurethane

Injection Grouting Chemical

CYH-202 Semi-hydrophobic Polyurethane Grouting is

used to stop leaks and fill underground voids.

CYH-202 is a polymer solution which cures

when reacted with water,

CYH-202 can not only stop the water,

but also it can stop or slow

the deterioration of steel bar or

other internal features of the concrete.

This success is due to

the placement of CYH-202

throughout the depth of the crack.

CYH-303

High Flexible PU Foam (Double Components Type)

Injection Grouting Chemical

CYH-303 is self-reacting of double components(Resin & Hardener) type

hydrophilic polyurethane which has polyether polyol properties.

CYH-303 applies to the leakage area for the waterstops where has vibration also

because it has elastic property foaming ratio with water is very lower than normal PU foam (Hydrophobic type).

CYH-303 density is high and hardened foam is same like a rubber. Therefore, it is useful for the expansion joints and water

leakage caused by deformation. Waterproof effects last semi-permanently.

It provides strong physical strength after contact with water.

So these properties brings excellent bonding strength to give

the waterproof ability and reinforcement. It is high elastic PU material.

Double Component Dry Sealant for Crack and Steel Plate Reinforcement

It is a typical high strength epoxy sealant for concrete

structure repair and reinforcement.

It is used on the crack sealing for the epoxy injection work,

the steel plate reinforcement sealing and the syringe injector

pedestal mounting and other multiple sealing works.

And, it is highly adhesive to concrete and

highly impact resistant.

Double Component Low Viscosity Dry Epoxy Injection Agent

It is a specialized repair and

reinforcement material that

is injected to cracks in the various types to

keep the initial concrete state

by maintaining the best adhesiveness.

GELACRYL Superflex 2-component acrylic built resin

GELACRYL™ SuperflexGelacryl Superflex is a 2-component acrylic based resin developed for injection into pores, cracks, capillaries, voids and honeycombed concrete.

Double Component Low Viscosity Wet Epoxy Injection Agent

It is a specialized repair and reinforcement material that

is injected to cracks with wet to keep the initial concrete state

by maintaining the best adhesiveness.

The humidity, moisture, and oil at construction structure

cause a damage to the chemical reaction of between 

epoxy resin and hardener, and cause the decrease of

strength, adhesion.

HEL-080 is epoxy for wet by increasing hydrophile,

as the solution of the problem.

HEL-080 is a specialized in the cracks with wet, moisture,

humidity. HEL-080 is low viscosity, which is capable of

injecting into fine cracks.

Wet Type Epoxy Putty

Injection Grouting Chemical

HEP-008 is a epoxy putty made from

special polyamid which does not dissolve in water

during application and also after application

to repair cracks on under-water concrete structures. 

Injection Grouting Machine

--5 meter hose pipe

--Pressure Gauge

--Bosch Operated Drill Machine

--1T-Panna

--Tool Kit (Spring,Ball,Spanner,O-Ring)

--Chemical grade Stainless Steel Hopper

--Bosch Operated Drill Machine

--PVC Hopper

--5 Meter Hose Pipe

--1T Panna

--Tool Kit (Spring,Ball,Spanner,O-Ring)

--Pressure Gauge

High pressure grouting injection pump for injecting Epoxy resin & Polyurethane foam.

Driving System : Electric Motor

Weight : 29Kg

Power : AC 200V,1.1 KW

Mixture Ratio : 1:1

Hose Length : 8m x 2

Size(L x W x H) : 470mm x 430mm x 650mm

Tank : 10 ltr x 2 Nos

Discharge Pressure : Max. 300kgf / kgf/cm² G

(Recommend under 100 kgf/cm²)

Discharge Volume : 1L - 1.5L/min

5 meters high pressure Hose

Pressure Gauge

Stainless Steel HOppER (cAPACITY 5 LTR)

Grouting gun

ELECTRIC PISTON PUMP

MOTOR POWER-2.0 KW

POWER REQUIRMENT-220V/50HZ

MAX PRESSURE-3200PSI(227 BAR)

Flow Rate (l/m) : -2.5L/MIN

Airless Spray Painting Machine 

max pressure - 3290psi

motor power - 2.8 Kw

max tip size- 0.35

max flow rate- 4.5 lpm