Instrumex

Particulate Monitor

Model No : Dustec  500X

Real Time Dust Monitor with Temperature & Humidity

Light Weight & Low cost monitoring Solution

• Confirms to U.S. EPA guidelines

• Choice of Sampling inlets for PM2.5, PM10 and TSP

• Construction suitable for outdoor use 

. Flow rate maintained Constant @ 16.67 LPM with

±2% Accuracy Throughout Sampling Period using Microprocessor Based

Digital Flow Controller.

- Simultaneous Sampling of Dust & Gases

 - Rechargeable Li-Ion Batteries for 8 hour Run time

 - Programmable Timer

- Option for 0-5LPM, 0 – 500mLPM or 0 – 200mLPM

 - Ultra Silent operation

> Dual channel enables measurement of PM-10 & PM10 Simultaneously

 > PM-10 Confirms to 40 CFR, Part 50 Appendix J of USEPA

 > PM-2.5 Confirms to 40 CFR, Part 50 Appendix L of USEPA

 > Microprocessor based Precision flow control for each channel

 > Data Logging of all parameters for each channel

 > Data Retrieval by USB and RS-232 ports

 > Extremely portable with Foldable tripod stands and carry case

• Simultaneous Sampling of PM10 & TSPM

• Brushless & Noiseless Blower Motor

• Programmable Timer

• Rugged construction for heavy duty usage

• Voltage Protection Relay for superior motor protection

The Sensidyne Colorimetric Gas Detector Tube System is the quality-standard in the industry and the first detector tube pump with an antibacterial grip. Detector tubes safely allow users to perform field screening and tests for the presence of hazardous and toxic gases, and chemical vapors at a very low cost-per-sample. High-quality and highly-reliabel Kitagawa gas detector tubes from Sensidyne are precision tubes offering a higher level of accuracy and repeatability for applications where results matter.

Colorimetric Gas Detector Tubes are easy to use and provide a low-cost method of routine or spot sampling for gases and vapors. The system is perfect when sampling for a known target gas, visit our gas detector tube page for information on our detector tubes for over 350 types of vapor & gas substances. When the target gas or substance is unknown, our specialty HAZMAT kits provide an excellent answer for quick identification and measurement.

Model No : AP20-S

• Slender ergonomic design with sure-grip shape.

• Lightweight, corrosion-resistant and spark-resistant if dropped.

• 100 ml per stroke.

• Standard flow finish indicator, so there is no doubt when sample is complete.

• Built-in tube cutter with storage for broken glass makes this a safe and easy pump to operate.

• Full lifetime warranty.

The most versatile and compact Environmental Monitoring System that combines high quality Weather monitoring sensors with Ambient Air Quality parameters to give a complete system for all kinds of Environmental data.

Applications

• Urban Pollution Monitoring (SMART City Application)

• Construction site Environmental monitoring

• Development Zone Environmental Monitoring

• Industrial Pollution Source Monitoring

• Traffic Environmental Monitoring

It is INTEGRATING SOUND LEVEL METER, class 2 Model : SL-4035SD. It is Real time data logger, save the data into the SD memory card and can be downloaded the Excel, extra software is no need. Also, Frequency and time weighting meet IEC 61672-1class 2, IEC 60804 type 2, SD Card real time data recorder

The HTC-1350 is a highly featured instrument to be used for sound level measurement. It is easy to use, having advanced features and user friendly. It has RS-232 communication which optional too. It basically used to measure the current sound pressure level, Equivalent Continuous A sound pressure level & statistic analysis. 

Powerful, yet small and lightweight, the Castle GA257L noise dose meter combines the latest technological advances with a realistic price tag. With it's clear and easy to read 8 character alpha numeric display, soft-touch keypad, electronic security lock and instant calibration facility, the GA257L is sure to prove invaluable in a wide range of occupational health applications

The BSWA 308 is a digital sound level meter that complies with the IEC61672 Class.This instrument is the basic model of BSWA 300 series. The use of high precision 24Bits AD converter makes the instrument to bea ideal choose for performing many kinds of measurement tasks, forexample in environmental noise, vehicle noise and industrial application.A main interface can display most useful information of the instrument states and basic noise result. In addition, there is a three profiles interface display independently result that measured in parallel. All profiles can be defined different filters (A,C,Z) and detector time constants (Impulse, Fast and Slow).

Water is undoubtedly the most precious natural resource that exists on our planet. Without the seemingly invaluable compound comprised of hydrogen & Oxygen, life on earth would be non-existent. Although we as humans recognize this fact, we disregard it by polluting our rivers, lakes and ocens. Instrumex provides practical solutions for problems like Water Pollution, contamination of water resources by harmful wastes, etc. Chemical Oxygen Demand (COD) is used as a measure of oxygen requirement of a sample that is susceptible to oxidation by strong chemical oxidents

The Gilian Gilibrator 2 Calibration System is an easy to use Primary Standard for the calibration of air sampling equipment. The system includes a high accuracy, electronic flow meter that provides instantaneous air flow readings and cumulative averaging of multiple samples. Three Wet Cell Assemblies provide a wide range of flow rates and are easily interchangeable using twist-on/off mounting.

The field air flow calibrator is ideal for field calibration of PM2.5 Sampler. It works with a precise flow of 16.67LPM and calibrate air flow ranging from 1-30 LPM. The calibrator is available with measuring provision for barometric pressure and ambient temperature and NIST traceability. It is suitable for temperature range of -30° to +55° C and displays both actual and standard flow rates. The device is and is powered by battery. It is simple in operation with no moving parts. The flow through the instrument is uninterrupted and the graphic software provides a continuous output display for all the functions

The Gilian LFS-113 low flow sampler is the most powerful and reliable pocket sized personal air sampler available today. The LFS- 113 offers two sampling modes selectable by the user. The constant flow control mode holds the flow within +/-5% of the set flow. The multi-flow (constant pressure control) mode allows multiple samples to be taken simultaneously

Flow Range (0-5 LPM)

Model No : GilAir Plus

The most Advance Air Sampling Pump in the world!

• Easily Monitor Activity with Your Mobile Device! 

• QuadMode Air Sampling Technology 

• SmartCal Automatic Calibration 

• Temperature & Pressure Compensation 

The AirCon-2 Air Sampling System (PNº 801012) is a powerful environmental air sampler used to collect air samples indoors and outdoors. It is equipped with useful performance features industrial hygienists need most; easy set-up, compact size, Battery Pack operation, programmable timing functions and DC portability. The unit may be operated on AC current when used with the optional Power Module.

A weather monitoring station is a facility with instruments and equipment for measuring atmospheric conditions to provide information for weather forecasts and to study the weather and climate. It is available with Solar Panel and Mounting Accessories. The data is stored in a 2GB MicroSD card and also transmitted over to a central server through GSM/GPRS and data from this server can be downloaded into the PC. A GPRS activated sim card is required for data Transfer to network. Data from this network is available through internet irrespective of the location of installation. All the sensor are Davis, USA make.

The BSWA 309 is a digital sound level meter that complies with the IEC61672 Class. The use of high precision 24Bits AD converter makes the instrument to bea ideal choose for performing many kinds of measurement tasks, for example in environmental noise, vehicle noise and industrial application. A main interface can display most useful information of the instrument states and basic noise result. In addition, there is a three profiles interface display independently result that measured in parallel. All profiles can be defined different filters (A, C, Z) and detector time constants (Impulse, Fast and Slow).

The INSTRUMEX Single Channel Fine Dust Sampler is a high-performance ambient air sampling instrument developed and manufactured by Instrumex for the collection of particulate matter samples in accordance with USEPA Reference Method Principles,CPCB Ambient Air Quality Monitoring Guidelines & NPL-Delhi Certified  .