FIEO Registered
Our Products
Showing 1-24 of 72 products
Natural Marble Candle Holder Set for Home Decor and Table Decoration for Interior Decor and Project Furnishing
natural marble candle holder set for hospitality & interior décor
Interior designers and hospitality procurement teams select hand-finished marble candle holder sets to create consistent tabletop aesthetics in guest rooms and dining areas. Each set is finished and inspected for surface evenness and sealed to appropriate standards for decorative use. Request current MOQ and lead time to align production with seasonal display plans.
Material & Finishing Specifications (Marble Set)
- Stone variety: marble family material, typically a white marble variety with stable veining suitable for décor pieces.
- Typical dimensions per holder: 80–120 mm diameter with height 40–80 mm depending on design variant.
- Mohs hardness typically 3–4 indicative of common decorative marbles.
- Porosity typically 0.5–2% indicative after sealing; sealed surface to protect finish.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by set design and finish; request current MOQ for your branded merchandise run.
- Lead Time: Finish and sealing add production time; request lead time for your order quantity and finish specification.
- Supply Capacity: Production scheduled in batch runs to support seasonal retail or hotel rollouts.
- Packaging: Retail-ready boxed sets with protective foam inserts and outer cartons for pallet shipping.
- Quality Check: Each set inspected for finish, dimensions, and sealant adhesion before packing.
Viscon White Granite Gangsaw Slabs for Flooring, Countertops and Wall Cladding for Flooring, Cladding, and Surface Applications
viscon white granite gangsaw slab for flooring & countertops
Countertop fabricators and architectural contractors specify Viscon white granite gangsaw slabs when they need consistent colour and book-matching capability for interiors and façades. These gang-sawn slabs are suitable for polished finishes used in high-traffic flooring and countertop fabrication. Request current MOQ and lead time to match slab yield with your template layout and installation schedule.
Technical Specifications & Grading (Viscon White)
- Typical slab thickness options: 18 mm and 30 mm as commonly supplied for fabrication projects.
- Apparent density typically ~2.65 g/cm³ measured per ASTM C97 for natural stone.
- Water absorption typically ≤0.4% by ASTM C97, suitable for indoor cladding and countertops.
- Compressive strength typically ≥100 MPa indicative of gang-sawn granite performance.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ for your required panel yield per project.
- Lead Time: Dispatch timing depends on crate preparation and polishing schedule; request lead time for your batch requirements.
- Supply Capacity: Manufactured in scheduled slab runs to support recurring project deliveries and batch orders.
- Packaging: Crated and fumigated wooden crates with foam packing for slab protection during transit.
- Quality Check: Each slab undergoes visual grading and dimensional inspection prior to crating per ASTM test practice.
Mica Quartz Lumps for Industrial Processing and Material Supply
mica quartz lumps for ceramics, fillers & refractory use
Ceramics manufacturers and refractory producers source mica quartz lumps for blending into high-temperature formulations and filler mixes. The lumps provide a coarse charge suitable for calcination or further milling to targeted particle sizes. Request current MOQ and lead time to align kiln schedules and batch processing runs.
Material & Size Specifications
- Typical lump size distribution: 10–50 mm fractions suitable for feedstock or primary crushing.
- Bulk density typically 2.6–2.8 g/cm³ dependent on mineral composition.
- LOI (loss on ignition) typically indicative of combined volatile matter, variable by origin.
- Impurity iron oxide traces typically <1% indicative for higher-brightness industrial grades.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity depends on fraction sizing and container loading; request current MOQ for project volumes.
- Lead Time: Lead time varies with lump sizing and processing; request current lead time for your batch requirements.
- Supply Capacity: Coordinated with plant-side capacity to fulfil recurring volume commitments and scheduled runs.
- Packaging: Bulk-packed in jumbo bags or loose in containers per buyer preference for processing facilities.
- Quality Check: Material undergoes visual sorting and representative sampling for impurity checks prior to dispatch.
Caco3
calcium carbonate powder for industrial fillers & coatings
Counterpart manufacturers and compounders require a high-purity calcium carbonate powder for filler, coating, and compounding applications. Sourced and prepared for industrial blending, the material is tailored for formulators needing consistent brightness and particle distribution. Typical procurement workflows include monthly bulk replenishment and specification verification before allocation. Request current MOQ and lead time to align volumes with production schedules.
Particle Size & Purity Specifications
- CaCO3 purity typically ≥95% by weight as a standard commercial grade (indicative).
- D50 particle size typically ~2–5 microns measured per ISO 13320 laser method.
- Moisture content typically ≤0.5% by weight under standard storage conditions.
- Bulk density typically 0.8–1.2 g/cm³ depending on grind and coating.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by packaging format and grind; request current MOQ for your specific volume requirement.
- Lead Time: Typical dispatch timing depends on lot preparation and packaging; request current lead time for your order size.
- Supply Capacity: Produced in scheduled batch runs to support recurring orders and repeat replenishment for formulators.
- Packaging: Supplied in industrial jumbo bags or 25 kg kraft bags and palletized for bulk transport and handling.
- Quality Check: Batch-sample tested for CaCO3 purity and particle D50, reported on COA prior to shipment.
Natural Granite Steps for Staircase – Anti-Slip Granite Stair Treads for Indoor & Outdoor Use
anti-slip natural granite stair treads for indoor & outdoor projects
Contractors and landscape architects specify anti-slip natural granite stair treads to deliver durable, low-maintenance steps for public and private projects. Treads are finished to provide slip-resistance suitable for wet conditions and are CNC-cut to consistent thickness and nosing profiles for safe installation. Request current MOQ and lead time to coordinate delivery with on-site installation sequencing.
Technical Specifications & Grading
- Tread thickness typically 20–30 mm according to installation requirements and load conditions.
- Slip-resistance rating commonly targeted R11 per DIN 51130 for flamed or textured finishes.
- Water absorption typically ≤0.5% by ASTM C97, appropriate for exterior use in moderate climates.
- Compressive strength typically ≥110 MPa indicative of granite suitability for stair treads.
Bulk Supply & Logistics Terms
- MOQ: Minimum order depends on tread count and profile; request current MOQ to match flight quantities.
- Lead Time: Production and finish scheduling affect dispatch time; request current lead time for project delivery windows.
- Supply Capacity: Manufactured in slab-to-tread runs coordinated with cutting capacity for recurring orders.
- Packaging: Each tread crate-protected with foam pads and wooden crates for safe transit.
- Quality Check: Dimensional and slip-resistance check performed prior to packing, referenced to the named finish standard.
Decorative Terracotta Jali Block for Ventilation Wall – Clay Breeze Block for Exterior & Interior Design
terracotta jali block for ventilated façades & screens
Architects and landscape designers specify decorative terracotta jali blocks to provide passive ventilation, sunlight modulation, and aesthetic texture for both interior and exterior walls. Blocks offer consistent module sizes for easy installation and can be arranged in repeating patterns to achieve design intent. Request current MOQ and lead time to plan phased façade deliveries.
Material & Dimensional Specifications
- Typical module size options: 200×200×60 mm and 300×300×80 mm modules for wall assembly.
- Dry density typically 1.6–1.9 g/cm³ depending on clay composition and firing profile.
- Compressive strength typically 10–25 MPa indicative for architectural terracotta blocks.
- Water absorption typically 8–16% depending on firing and glazing; outdoor exposure requires appropriate detailing.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by module size and pallet quantity; request current MOQ for façade projects.
- Lead Time: Firing and finishing schedule impacts lead time; request current lead time for phased deliveries.
- Supply Capacity: Production runs coordinated to meet project staging and repeat orders.
- Packaging: Palletized with protective wrapping for safe transit; shrink-wrap and corner protection included.
- Quality Check: Each batch undergoes visual inspection and compressive testing on representative samples before dispatch.
Patagonia Marble Block for Interior Stone and Architectural Projects
patagonia marble block for interior & architectural stonework
Stone fabricators and architectural specifiers source Patagonia marble blocks for polished countertops, wall cladding, and interior architectural features. Blocks are supplied for sawing and slab production with consistent veining and dimensional control. Request current MOQ and lead time so fabricators can schedule gang-saw and polishing batches.
Block Specifications & Grading
- Block sizes supplied per order and quarry yield; typical block weights range by extraction size and geometry.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 for typical marble varieties after standard processing.
- Compressive strength typically ≥70 MPa indicative for many marble blocks used in slabs and architectural features.
Bulk Supply & Logistics Terms
- MOQ: Minimum block order depends on extraction and crate volumes; request current MOQ for planned slab yield.
- Lead Time: Lead times vary with block extraction, sawing schedule, and finishing; request current lead time for project scheduling.
- Supply Capacity: Quarry-block runs are coordinated to meet slab gang-saw schedules and repeat orders.
- Packaging: Blocks are crated and strapped for safe handling and container export.
- Quality Check: Blocks undergo dimensional verification and visual grading before shipment.
Grey Quartz Lumps for Industrial Processing and Material Supply
grey quartz lumps for milling & filler production
Plastics and glass manufacturers source grey quartz lumps as feedstock for milling and blending operations. Lumps provide a coarse starting material for controlled grinding to target particle-size distributions used in glass and filler formulations. Request current MOQ and lead time to align material deliveries with grinding schedules and batch processing.
Material & Size Specifications
- Typical lump size distribution: 8–40 mm suitable for primary crushing and mill feed.
- Bulk density typically ~2.6–2.7 g/cm³ depending on mineral composition.
- Silica content typically high; perform silica assay to confirm specification for glass grades.
- Impurities such as iron oxide typically <1% for higher-grade industrial supplies.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity depends on fraction and container load; request current MOQ for processing volumes.
- Lead Time: Lead time varies with sizing and container preparation; request current lead time for your batch requirements.
- Supply Capacity: Coordinated with plant-side capacity to support recurring orders and scheduled runs.
- Packaging: Jumbo bags or loose container-loads per buyer handling needs.
- Quality Check: Representative sampling and assay reports are provided for lot acceptance prior to shipment.
Natural Sandstone Slabs for Architectural and Landscaping Use
natural sandstone slabs for paving, cladding & landscaping
Landscape architects and contractors select natural sandstone slabs for paving, pool surrounds, and façade cladding owing to their textured cleft surfaces and warm tones. Slabs are sawn or cleft to thicknesses appropriate for pedestrian or vehicular applications. Request current MOQ and lead time to match slab deliveries with paving schedules and installation windows.
Material & Performance Specifications
- Typical slab thickness: 20–40 mm for paving and 30–50 mm for stepped or heavy-load use.
- Slip-resistance rating often provided per DIN 51130 or equivalent testing for finished textures.
- Frost resistance typically expressed as cycles to failure per ASTM C1026 for outdoor suitability.
- Water absorption typically 2–6% depending on stone porosity and finish.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity depends on slab count and crate volumes; request current MOQ for landscape projects.
- Lead Time: Production and finishing schedules determine lead time; request current lead time for staged deliveries.
- Supply Capacity: Stocked at typical inventory levels to support short-notice reorders for repeat projects.
- Packaging: Crated slabs with timber supports and protective straps for containerized export.
- Quality Check: Slabs undergo visual grading and dimensional checks; slip-resistance tests provided where applicable.
Fantasy Brown Marble for Interior Stone and Architectural Projects
fantasy brown marble slabs for countertops & wall cladding
Interior designers and fabricators select Fantasy Brown marble slabs for warm-toned countertops, feature walls, and bespoke architectural elements. Slabs are supplied for polishing and edge profiling with consistent veining for book-matched installations. Request current MOQ and lead time to coordinate slab selection with fabrication schedules.
Slab Specifications & Grading
- Standard slab thicknesses typically 18 mm and 30 mm for countertop and cladding use.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after processing.
- Compressive strength typically ≥70 MPa indicative of marble used in interior applications.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ to match fabrication runs.
- Lead Time: Lead time depends on polishing and finishing schedules; request current lead time for planned deliveries.
- Supply Capacity: Gang-saw slab runs are scheduled to support repeat orders and phased project deliveries.
- Packaging: Crated slabs with foam separators and wooden crates for secure transport.
- Quality Check: Visual grading and dimensional checks are performed before crating and dispatch.
Linea Side Stone Table & Axis Cylinder Marble Stool for Interior Decor and Project Furnishing
linea marble side table & axis cylinder stool for hospitality furnishing
Hospitality and interior fit-out buyers source Linea marble side tables and cylinder stools for curated guestroom and public area furnishings. Each piece is hand-finished or CNC-profiled with sealed surfaces and precise edge details to match interior schemes. Request current MOQ and lead time to coordinate production runs with furniture delivery schedules.
Material & Build Specifications (Linea Collection)
- Exact stone variety: named marble variety or equivalent decorative marble family depending on batch selection.
- Typical stool dimensions: diameter 350–450 mm with heights 420–480 mm for seating variants.
- Mohs hardness typically 3–4 indicative of marble varieties used in décor.
- Porosity typically 0.5–2% after sealing; sealed finish applied to reduce staining risk.
Bulk Supply & Logistics Terms
- MOQ: Minimum order varies by design and finish; request current MOQ for branded furnishing runs.
- Lead Time: Finishing and sealing add production time; request lead time for your order quantity.
- Supply Capacity: Produced in scheduled furniture runs to support repeat hospitality orders.
- Packaging: Retail-ready cartons with foam inserts and wooden crating for bulk shipments.
- Quality Check: Dimensional checks and surface finish inspections are performed before packing.
Morwad White Marble Slabs for Interior Stone and Architectural Projects
morwad white marble slabs for interiors & architectural surfaces
Fabricators and designers specify Morwad white marble slabs for uniform coloration and fine veining suitable for interior countertops and wall cladding. Slabs are gang-sawn and finished to meet polishing tolerances for premium installations. Request current MOQ and lead time to align slab deliveries with fabrication schedules.
Slab Specifications & Grading
- Typical slab thickness options: 18 mm and 30 mm commonly used for interiors.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after processing.
- Compressive strength typically ≥70 MPa indicative of marble used in interior applications.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ for project requirements.
- Lead Time: Lead times depend on gang-saw and polishing schedule; request current lead time for your order.
- Supply Capacity: Gang-saw slab runs scheduled to support repeat orders and phased deliveries.
- Packaging: Foam-separated wooden crates for slab protection during transit.
- Quality Check: Visual grading and dimensional checks performed prior to crating and shipment.
Rajnagar White Marble Slabs for Interior Stone and Architectural Projects
rajnagar white marble slabs for interiors & feature walls
Architects and fabricators specify Rajnagar white marble slabs for polished countertops and interior wall cladding due to even coloration and workable veining. Slabs are gang-sawn and finished to meet polishing tolerances for premium interiors. Request current MOQ and lead time to coordinate slab selection with fabrication and installation schedules.
Slab Specifications & Grading
- Standard slab thicknesses typically 18 mm and 30 mm for interior applications.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after processing.
- Compressive strength typically ≥70 MPa indicative of marble slab performance.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ for slab selection.
- Lead Time: Lead times depend on gang-saw and polishing schedules; request current lead time for your order.
- Supply Capacity: Gang-saw slab runs are scheduled to support repeat orders and project deliveries.
- Packaging: Foam-separated wooden crates for slab protection during transit.
- Quality Check: Visual grading and dimensional checks performed prior to crating and shipment.
Banswara White Marble Slabs for Interior Stone and Architectural Projects
banswara white marble slabs for interior countertops & cladding
Interior finishers and architects source Banswara white marble slabs for consistent white backgrounds and subtle veining ideal for countertops and wall cladding. Slabs are sawn and polished with controlled finish tolerances to ensure uniformity across installations. Request current MOQ and lead time to align slab delivery with fabrication schedules.
Slab Specifications & Grading
- Standard slab thickness options typically 18 mm and 30 mm for interior applications.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after processing.
- Compressive strength typically ≥70 MPa indicative for marble slab usage.
Bulk Supply & Logistics Terms
- MOQ: Minimum order depends on slab count and crate sizing; request current MOQ for your project quantities.
- Lead Time: Lead times depend on gang-saw and polishing schedules; request current lead time for your order.
- Supply Capacity: Gang-saw slab runs scheduled to support repeat orders and staged deliveries.
- Packaging: Foam-separated wooden crates for slab protection during transit.
- Quality Check: Visual grading and dimensional checks performed prior to crating and shipment.
Galaxy Gangsaw Granite for Flooring, Cladding, and Surface Applications
galaxy gangsaw granite block for flooring and cladding
Flooring contractors and façade fabricators specify Galaxy Gangsaw Granite for its dense structure and uniform dark field with reflective mica. Blocks are cut on gang saws to produce yield-optimized slabs for polished flooring, external cladding and countertop fabrication. The material's density and low porosity make it suitable for high-traffic interior surfaces and exterior panels when properly fixed and sealed. Buyers receive technical grading data and cutting yields to plan material usage and estimate slab yields. For project procurement, provide finish and slab-size targets to obtain volume pricing.
Galaxy Granite — Technical Specifications & Grading
- Density approximately 2.75 g/cm³, suited to heavy-duty flooring applications.
- Water absorption ≤0.3% typical for gang-sawn granite after polishing.
- Compressive strength commonly ≥150 MPa for this granite class.
- Slab thickness and finish tolerance: 20mm/30mm with ±2mm tolerance for fabrication accuracy.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab yield and finish selection — request current MOQ for project volumes.
- Lead Time: Production and finishing lead times depend on order size and surface treatment — request current lead time for your order.
- Supply Capacity: Manufactured in scheduled batch runs to support repeat project deliveries and larger consignments.
- Packaging: Slabs crated with protective interleaving and secured on pallets for container shipment.
- Quality Check: Each slab undergoes dimensional and finish inspection prior to packing and dispatch.
Panda White Marble for Interior Stone and Architectural Projects
panda white marble slabs for premium interior finishes
Fabricators and designers choose Panda white marble slabs for refined interiors and feature installations that require consistent background tone and vein character. Slabs are prepared for polishing and template cutting for countertops and wall panels. Request current MOQ and lead time to schedule gang-saw runs and finishing.
Slab Specifications & Grading
- Typical slab thickness: 18 mm and 30 mm commonly supplied for interior applications.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after finishing processes.
- Compressive strength typically ≥70 MPa indicative of marble used for interior surfaces.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ for scheduled deliveries.
- Lead Time: Lead times depend on sawing and polishing schedules; request current lead time for project planning.
- Supply Capacity: Gang-saw runs scheduled to support repeat orders and phased deliveries.
- Packaging: Foam-separated wooden crates for secure transit.
- Quality Check: Visual grading and dimensional verification carried out prior to crating.
Marble Designer Dining Table with Sculptural Base for Interior Decor and Project Furnishing
designer marble dining table with sculptural base for hospitality fit-outs
Interior designers and hospitality fit-out teams specify this marble dining table for sculptural statement pieces and project furnishing packages. The table combines a solid stone top with a carved or CNC-shaped base to deliver a monolithic aesthetic. Sourcing focuses on stone variety, top thickness and base engineering to meet seating and load requirements. Buyers should confirm surface finish, edge detailing and on-site handling constraints early in the procurement process. Custom sizing and matched sets are available for coordinated interiors and contract deliveries.
Technical Specifications & Material Details
- Top thickness options typically 30mm or 40mm with CNC-profiled eased edges.
- Tabletop weight and top-load capacity engineered per dimension; typical tabletop density ~2.70 g/cm³.
- Surface finish options: honed, polished, or matte sealed surface for hospitality use.
- Edge and base tolerances manufactured to ±3mm for on-site fit coordination.
Procurement & Logistics Terms
- MOQ: Minimum order quantity depends on size and finish — request current MOQ for project set requirements.
- Lead Time: Production and finishing lead times depend on carving complexity and order volume — request current lead time for your order.
- Supply Capacity: Production batches scheduled to support repeated furnishing orders for hospitality projects.
- Packaging: Crated with internal bracing and protective surfacing for safe transit.
- Quality Check: Each table undergoes visual and dimensional inspection before packing and dispatch.
Panda white marble block for Interior Stone and Architectural Projects
panda white marble block for interior applications
Architects and fabricators specify Panda White Marble Block for interior stonework and architectural elements where consistent veining and a light field are required. Sourced for dimensional block cutting, these blocks support slab production for countertops, wall cladding and bespoke architectural elements. The technical grading emphasizes density and water absorption for fabrication stability. Procurement teams will find project-ready sizing options and documentation to support volume orders. Lead-time and MOQ are handled per project specification; request current MOQ for your required block sizes.
Panda White Marble — Technical Specifications & Grading
- Density approximately 2.70 g/cm³, providing reliable machining behaviour.
- Water absorption ≤0.4% as commonly measured for polished marble slabs.
- Compressive strength typical range ~80–110 MPa for marble varieties of this class.
- Slab thickness options produced from blocks: 20mm, 30mm, cut-to-size tolerances ±2mm.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by block dimensions and finish — request current MOQ for your specific volume requirement.
- Lead Time: Dispatch timing depends on order volume and finishing schedule — request current lead time for your specific order.
- Supply Capacity: Produced in scheduled batch runs to support recurring orders and project replenishment cycles.
- Packaging: Blocks and slabs are crated on wooden skids, banded and protected for container export as required.
- Quality Check: Each shipment undergoes dimensional and visual inspection against grading criteria prior to dispatch.
Exalted Plaza Signature Marble Fireplaces for Architectural and Landscaping Use
marble fireplace surround for architectural interiors
Architects and hospitality designers specify marble fireplace surrounds to create focal hearths in lobbies, reception rooms and residential spaces. Surrounds are fabricated to match chimney apertures and to meet local installation clearances. Finish choices and hearth integration influence thermal detailing and mounting requirements.
Technical Specifications — fireplace surround
- Material: Named marble variety specified per project; slab thickness typically 20–40 mm for facing elements.
- Finish: Polished or honed finish with sealed surface for protection against soot and cleaning agents.
- Tolerance: Fabrication tolerance ±3–5 mm for mating surfaces and reveal details.
- Mounting: Mechanical anchorage details provided for secure wall fixing and hearth integration.
Procurement & Logistics Terms — fireplace surrounds
- MOQ: MOQ varies by finish and complexity; request current MOQ for project quotations.
- Lead Time: Lead time depends on fabrication and finish; request the current schedule for deliveries.
- Supply Capacity: Coordinated batch production to meet phased installation schedules.
- Packaging: Crated with protective layers and palletization for safe shipping.
- Quality Check: Dimensional and visual inspection performed against approved shop drawings before dispatch.
Classic Name Pedestal for Interior Decor and Project Furnishing
stone name pedestal for interior displays and memorials
Museum installers, interior designers and memorial specialists specify classic stone name pedestals for plinth displays and commemorative installations. The pedestal is produced to fixed dimensional tolerances and a selected finish suited to interior or sheltered exterior locations. Designers often pair pedestals with accent lighting or bronze nameplates for installations.
Technical Specifications & Construction — pedestal details
- Material: Natural stone or engineered stone options with polished or honed finish.
- Dimensions: Custom heights and footprint; fabrication tolerance typically ±3–5 mm.
- Load capacity: Engineered to support typical plinth-mounted exhibits; confirm loads for heavy objects.
- Finish treatment: Sealed surface for spill resistance where required.
Procurement & Logistics Terms — name pedestals
- MOQ: MOQ varies by finish and customization; request current MOQ for project pricing.
- Lead Time: Lead time depends on customization and finish; request current lead time for your order.
- Supply Capacity: Produced in scheduled runs to support multi-unit display programs.
- Packaging: Crated with foam protection and wooden frames for safe transit.
- Quality Check: Dimensional and surface inspection against approved samples before dispatch.
Sculptures for Architectural and Landscaping Use
architectural stone sculptures for public art and landscapes
Landscape architects, developers and cultural institutions specify architectural stone sculptures as focal features in public plazas, gardens and civic projects. Sculptures are produced to project-approved forms and finishes, with anchorage and foundation details integrated into delivery specifications. Weathering characteristics and maintenance regimes are considered during material selection and finish decisions.
Technical Specifications & Fabrication — sculpture items
- Material: Natural stone or cast stone reproductions depending on design and exposure.
- Dimensions: Custom sizes with fabrication tolerances typically ±5 mm depending on scale.
- Finish: Hand-finished or CNC-assisted detailing with optional weather-resistant sealing.
- Anchorage: Structural anchor provisions specified for safe installation and load distribution.
Procurement & Logistics Terms — sculptural elements
- MOQ: MOQ varies by size and finish; request current MOQ for project pricing and production planning.
- Lead Time: Lead time depends on sculpture complexity and scale; request site-specific lead times.
- Supply Capacity: Coordinated production schedules support phased installations for park and civic programs.
- Packaging: Crated with internal bracing for safe international transport.
- Quality Check: Visual and dimensional inspection against approved models before dispatch.
Dining Table Set for Interior Decor and Project Furnishing
stone dining table set for interior furnishing
Stone dining table sets crafted from natural slab material are specified for hotels, restaurants and residential projects requiring durable, easy-to-maintain surfaces. Each set combines a precisely profiled stone top with a structural base engineered for load-bearing stability. Furniture fabricators deliver finished tops with edge profiles and sealing applied to buyer specification. Procurement teams should request sample tops and exact dimensions to confirm fit-out and handling requirements. Request current MOQ and lead time to coordinate delivery with installation phases.
Technical Specifications & Grading — Dining Table Set
- Exact stone variety and top thickness should be specified; typical tops supplied at 30 mm with CNC edge profiling for dining use.
- Mohs hardness for tabletop stone typically 5–7 depending on variety; porosity % provided on COA.
- Tabletop tolerances ±2 mm and flatness tolerance to reduce site leveling work.
- Finish options include polished, honed and sealed surfaces suitable for hospitality cleaning regimes.
Bulk Supply & Logistics Terms — Dining Table Set
- MOQ: MOQ depends on model, finish and quantity per crate — request current MOQ for your volume needs.
- Lead Time: Lead time varies by finish and customization — request current lead time for precise scheduling.
- Supply Capacity: Production scheduled to support project batches and staged deliveries.
- Packaging: Palletized crating with foam protection and top supports for safe transit.
- Quality Check: Each tabletop undergoes dimensional and finish inspection prior to packing to meet buyer specifications.
Wall Water Fountain for Architectural and Landscaping Use
wall water fountain stone for landscaping and architecture
Landscape architects and hospitality designers specify wall water fountain stone elements to create vertical water features for public and private projects. These pre-carved or CNC-finished stone panels support water channels and integrated plumbing while providing a decorative cladding surface. Material selection focuses on slip- and frost-resistance where exposure occurs and on finish durability in wet environments. Buyers should confirm plumbing interface dimensions, anchorage details and finish choice before ordering to ensure compatibility with site conditions. Multi-panel sets can be produced and crate-packed for site installation.
Technical Specifications & Material Details
- Panel thickness options typically 30–50mm with CNC-cut plumbing channels.
- Slip-resistance testable surface or textured finish available per project needs.
- Stone density and porosity managed with sealing to reduce water ingress.
- Panel tolerances typically ±3mm to assist with modular installation coordination.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by panel size and finish — request current MOQ for project sets.
- Lead Time: Lead times depend on carving complexity and integration of plumbing features — request current lead time.
- Supply Capacity: Production scheduled to support phased installation deliveries for projects.
- Packaging: Crated with internal bracing and protective surfacing for safe transit.
- Quality Check: Visual and dimensional inspection performed prior to dispatch to ensure alignment with specifications.
Center Table Set Elegant Design – Durable Build – Export Quality for Interior Decor and Project Furnishing
stone center table set for residential and hospitality interiors
Procurement teams and interior fit-out contractors select this center table set for lounge areas, guest rooms, and lobby seating groups where a cohesive stone aesthetic is desired. The set includes surface tops and matching pedestals finished to designer specifications. Design choices affect weight, transport packaging, and on-site installation needs.
Technical Specifications & Material Grades — center table set
- Material: Natural or engineered stone tops; typical thickness range 18–30 mm per tabletop.
- Edge finish: Bullnose or eased edge with polished surface and sealed coating for spill resistance.
- Assembly tolerance: Fabrication tolerance ±3–5 mm on mating surfaces to allow accurate assembly.
- Weight: Unit weights vary by material; confirm slab density for handling plans.
Procurement & Logistics Terms — center table set
- MOQ: MOQ varies by configuration and finish; request current MOQ for bulk pricing and export runs.
- Lead Time: Lead time depends on finish and quantity; request the current schedule for production and dispatch.
- Supply Capacity: Stocked and produced in scheduled batches to support multi-unit project deliveries.
- Packaging: Palletized crate packing with foam and corner protection for international shipments.
- Quality Check: Surface finish and dimensional inspection performed prior to packing to ensure consistency.
GL Trustmark
