EIE INSTRUMENTS P.LTD

Compliance With Following National / International Standards:

ASTM D882, ASTM D828, ASTM D1938, ASTM D1876, ASTM D638, ASTM F88, ASTM F904, ASTM D2256, ASTM D5034, ASTM D412, ISO 1924, TAPPI T494

Applications:

TO MEASURE DUCTILITY STRENGHT OF BITUMEN - ELONGATION AND STRENGTH

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Slide Warming table is good for cytology, histology, pathology, biology and clinical laboratories which are engaged in paraffin tissue embedding and section mounting.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

ASTM D1856, AASHTO T170, AASHTO R59

Also, known as ABSON Method. Used for recovering the asphalt (bitumen) from a solution of a previous extraction. The asphalt is recovered with properties substantially the same as those it possessed in the bituminous mixture and in quantities sufficient for further testing.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IS 4984 & IS 4985

The dispersion of carbon is as similar to its content. The unbalanced dispersion of carbon causing cracking or crazing in material. The satisfactory dispersion of carbon presenting the best processing techniques of homogenous mixing. EIE - Carbon Black Dispersion Test Apparatus is mainly used for the determination of carbon black dispersion. It finds wide application in the plastic industry.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

The BRE Screed Tester is designed to measure the soundness of a sand and cement floor screed. Available with / without Dial Gauge.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Salient Features

Test sieves 45 cm diameter

Made of G.I. Sheet with joint

Seamless welding

Set consist of different sieves + 1 set of Lid‑Pan, as quoted below

Following Aperture sizes are available

100, 80, 63, 50, 40, 31.5, 25, 20, 16, 12.5, 10, 8, 6.3, 4.75 mm & Lid‑Pan

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

BS 3900, IS 3944

Also Available in various Cup Types such as : B3 Type, B4 Type, B5 Type, and B6 Type

Simple to use cups for the approximate measurement of apparent viscosity in a wide range of materials including paints, varnishes, lacquers, inks and other viscous products.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Seamless Brass frame, set consist of 8 sieves - 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron, 150 micron, 75 micron and a set of Lid‑Pan.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

ASTM D1895

The target of the ASTM family Method B is primarily used to measure the apparent density of larger coarse granular materials, dice or pellets that cannot be poured readily through the method A funnel. The material under test is allowed to flow into a cylindrical cup with a known volume of 400cm3

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Vapour Pressure Moisture Determination Apparatus With Glass Part will be suitable to find out the percentage of moisture determination in the raw and dry chips.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Polariscope is used to identify and evaluate residual Strain in annealed glass containers and similar products. Polariscope is an instrument for analysis of stress in annealed glass containers and similar products.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

As per SAE,BS 4437,1969

The equipments consist of :Fast heating special Furnace with precision temperature control

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

ASTM D2272, ASTM D2112, IS 12958, IP 229

Also available in various types of operation such as : 1) With Pressure Gauge System and 2) Electronic System with PC Aoftware

These methods used to evaluate the oxidation stability of new and in‑service engine, turbine and inhibited mineral insulating oils in the presence of water and a copper catalyst coil at 150°C as per ASTM D2272 and at 140 °C test temperature as per ASTM D211

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

ASTM D2272, ASTM D2112, IP 229

These methods used to evaluate the oxidation stability of new and in‑service engine, turbine and inhibited mineral insulating oils in the presence of water and a copper catalyst coil at 150°C as per ASTM D2272 and at 140 °C test temperature as per ASTM D2112. The method is applicable to determine the oxidation stability of both ‑ steam turbine oil and inhibited mineral insulating oil

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

EIE Instruments offers Solar Cell Testing Equipment OR Solar Module Manufaturing Testing Equipment. For more information please connect with us.

The Price mentioned here are subject to change as per the capacity, specifications and application of the user. 

Double walled, inner chamber S.S.304, Outer CRC powder coated , 65 mm thick glass wool insulation , 80/20 nichrome heating elements placed under ribs at bottom and sides for uniform heat distribution Temp. Range. 50˚C to 250˚C , Auto tune Dual Display Digital, forced air circulation, Working on 230 Volts AC Single Phase.

Further details available on our website.

Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards:

IS 6495: 1984, BIS 6495

Tumbler test provides a measure of the resistance of iron oxides:lump ores, sinter and pellets to breakage or degradation by impact and abrasion.