EIE INSTRUMENTS P.LTD

Compliance With Following National / International Standards: IS:2386 (Part IV), BS 812-110 Further details available on our website. The Price mentioned here are subject to change as per the capacity, specifications and application of the user.

Sieve Shaker Carries upto 7 sieves of 200mm diameter in single adaptor. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance Standards IS 2386 (Part IV) Accelerated Polishing Machine. Specimens are manufactured in accurately machined and matched moulds; they are then removed from the moulds and located on the ‘Road wheel’. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards: IS: 2386 (Part - IV)/ IS 9377 For determining the aggregate impact value of coarse aggregate Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards: IS : 2386 (PART-1) - (1963) Used to determine the percentage of particles in a coarse aggregate material that have a thickness (smallest dimension) of less than one-half of the nominal size. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance with following International Standards IS : 1199, IS : 10079, BS : 1881, ASTM C29, ASTM C138 For measurement of "Unit weights" and voids in aggregate. We also have wide range such as: BULK DENSITY CYLINDERICAL METAL MEASURE (ISI)-10 LTR. BULK DENSITY CYLINDERICAL METAL MEASURE (ISI)-15 LTR. BULK DENSITY CYLINDERICAL METAL MEASURE (ISI)-30 LTR. BULK DENSITY CYLINDERICAL METAL MEASURE (ISI)-20 LTR. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards: IP 34, ASTM D‑93, IS ‑ 1448 and IS ‑ 1209 This is widely used for determination for closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point above 49° C (50° C ‑ 360° C). Also available in various models such as : 1) With Energy Regulator 2) With Voltage Stirrer 3) Digital with Motorised Stirrer 4) Semi Automatic with Heating Facility 5) Semi Automatic with Heating and Cooling Facility and 6) Fully Automatic Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards: ASTM D2041, AASHTO T209, AASHTO T283 Used for determining the theoretical maximum specific gravity of uncompacted bituminous paving mixtures. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

As per ASTM D6926 It consists of three parts: heating pot, stirrer and Lifting mechanism. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

As per ASTM D6926 It consists of three parts: heating pot, stirrer and Lifting mechanism. It consists of three parts: heating pot, stirrer and Lifting mechanism. The temperature of the heating pot can be set arbitrarily from room temperature to 250 ℃, and the temperature can be controlled automatically. The agitator is composed of a mixing head, a motor and a mixing paddle. During operation, the mixing paddle rotates and rotates in the pot to mix the mixture. The mixing time is controlled by timer and can be set arbitrarily in the range of 1-9999 seconds. The lifting mechanism is composed of motor, belt reducer, lead screw and other components, which is used to realize the lifting of agitator. When feeding or discharging, the agitator rises to the highest position, while when mixing, the agitator drops to the lowest position. The Price mentioned here are subject to change as per the capacity, specifications and application of the user.

Compliance With Following National / International Standards: AS PER EN 12697-27, ASTM D 5361 Core drilling Machine to take out core sample from Asphalt, concrete & reinforced structure Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards: IRC-SP-53-2002 and IS 15462-2004 Made of brass /Gunmetal material. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards: AS PER IP 72 AND IS : 1206 & BS : 3235, Part-1 It is used for determining the viscosity of cut back bitumen and road oil. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Consist of 2 orifice cups in a S.S. (Stainless Steel) Water Bath mounted on Stand with leveling feet. Instrument is Fitted with 1000 watts ISI marked heating elements. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards: IS 2386 (Part-III, Method-III), BS 812, BS 1377:2, ASTM D854, IS 2386 Further details available on our website. The Price mentioned here are subject to change as per the capacity, specifications and application of the user.

Compliance With Following National / International Standards: ASTM C‑128; AASHTO T‑84 Sand Absorption Cone and Tamper is used for specific gravity and absorption of fine aggregates. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following International Standards: EN 12390-7, BS 1881:114, IS:2386 (Part III) Useful For Water absorption and specific gravity test of aggregates. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Compliance With Following National / International Standards: IS : 2386 (PART-1) This instrument is used to determine the elongation index of aggregates. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Also Available in 9x4x4", 10x5x5", 12x6x6", 12x8x8", 18x9x9" Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Cooling Incubators are majorly used for Media Preparation & Culture growth at temperatures of 22.5°C (±2.5°C) & 32.5°C (± 2.5°C) in Microbiology or ARD labs across the world. Features: Exterior boy is fabricated from S.S. 304 Material Interior chamber is also fabricated from Mirror polished Stainless Steel S.S. - 304 Material Outer double walled metal door with sponge - type silicon gasket for air-tight sealing as to avoid leakage of chamber uniformity Electrical wiring as per CE Compliances - with individual numbering of each internal circuitry wire for ease of maintenance & Repairing Chamber illumination is accomplished by Fluorescent light with door switch. Cord wire duly tested and inspected with stress factor as per CE standard Electric Motor of blower located at the back side of unit, which is protected with safety cover to avoid accident · Standard motor of reputed companies - such as CG, GODREJ or GE Make User friendly and tactfully designed chamber door and locking mechanism Aesthetic outer appearance and high quality Unit mounted on castor wheels for easy movement. Supplied complete with Stainless Steel Trays for sample placement Supplied complete With 21 CFR Software and IQ, OQ, PQ, DQ Documentation and instruction manual. Air Circulation: Temperature is maintained by a quiet running blower for better air circulation throughout the chamber. Forced air circulated vertically down and re-circulated throughout the chamber for uniform temperature distribution. Heating & Cooling System: Long lasting U-Shaped tubular heaters used as heating element. Hermetically sealed compressor CFC free compressor (134 A gas) coupled with evaporation coil and condenser. Specifications: Overall Dimension(mm): W525*D607*H1100 Temperature Range: -10~+65 Degree(-40~+65 Degree Is Optional) Working Room/ Temperature: 5~35 Degree Inner Dimension(mm): W400*D400*H500 Note : Price will be change as per specification

STABILITY CHAMBER-WITH PLC, HMI TOUCH SCREEN & 21 CFR SOFTWARE-REFRIGERATED-INNER S.S. Also available im different sizes and models. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Also available in incubator sizes and types Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.

Applications EIE - Rotary flask shakers are ideal for mixing and development of cultures, chemicals, solvents, and assays etc. in Microbiological, Cell Culture & Life Science laboratories. These are suitable for shaking in Erlenmeyer flasks. Salient Features Compact bench type table model. Aesthetic exterior appearance Easy to handle and clean design The body is mounted on heavy duty M.S. angle-iron frame, making it rigid and sturdy for smooth operation The top platform is equipped with rubber discs, so as to hold Erlenmeyer Flasks of different capacities To enable orbital circular motion, the platform is mounted on ball bearing crankshafts. The driving mechanism is enclosed in a mild steel sheet cabinet - powder coated. The shaker is fitted with DC Motor & precise electronic speed regulator. DC Motor ensures continuous work and precise speed control. Step-less electronic frequency control ensures gentle start and maintains preset speed. Compact counter balanced drive mechanism ensures high stability and reliability even in continuous operation & uneven load distribution. Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks Entire unit is standing on rubber feet to assure its stationary position while in operation. Automatic restart at preset speed in case of power failure Technical Specifications Shaker Construction : Single wall construction Top Plate : Fabricated from polished stainless steel material S.S. - 304 grade Exterior body : Fabricated from Mild steel material Paint : Powder coating in attractive shades Shaking : Achieved by DC motor with DC Drive Motor RPM : 50 - 200 RPM (Shaking speed) Motor speed display : Digital RPM Indicator (Shaking speed display) Speed control : By electronic Speed Regulator - DC Drive Shaking racks material : Manufactured from polished stainless steel material S.S. - 304 Grade Power consumption : 0.5 KW Operates on : 230 Volts, 50 Hz, Single phase, AC Supply Available in following sizes To hold capacity Platform size Product Code 9 flasks of 250 ml 12” x 12” EIE-113P9 16 flasks of 250 ml 18” x 18” EIE-113P16 20 flasks of 250 ml 24” x 24” EIE-113P20 36 flasks of 250 ml 36” x 36” EIE-113P36 81 flasks of 250 ml 48” x 48” EIE-113P81 Price will be change as per specification.

Compliance With Following National / International Standards: IS 2386 - IV, ASTM C135, IS 10070-1982 This machine is used to find the percentage wear due to relative rubbing action between the aggregates and steel balls used as abrasive charge. Further details available on our website. Price and specifications mentioned here are subject to change as per the application, customer requirements and prevailing market conditions. Please refer to us for the final rates and offer.