Min Order Qty 1 Unit
J. J. manufactures wide variety of valves to suit various applications. Different kind of valvemanufactured are Needle Valve, Ball Valve / Shut off Valve, Flow Control Valve, Non Return Valve / Check valve, Manifold Valve. Ball ValveType : Two way with or without vent, Three way, Four wayEnd Connection : Tube end (Single Ferrule & Double Ferrule), NPT / BSP (M/F)Flange endSize : 6mm to 42mm, 1/4” to 4”Pressure : Ranging from 40Bar to 700Bar depending on type and sizeMaterial : Steel, Stainless Steel, Brass (From extruded bar or forging)Surface Treatment : Steel – Zinc Coated (A3C) or PhospatisedStainless Steel – NaturalBrass – Natural
View DetailsGST Verified
Min Order Qty 1 Piece
J. J. manufactures wide variety of valves to suit various applications. Different kind of valvemanufactured are Needle Valve, Ball Valve / Shut off Valve, Flow Control Valve, Non Return Valve / Check valve, Manifold Valve. Needle ValveType : Straight, Angle Type, Panel MountingEnd Connection : Tube end (Single Ferrule & Double Ferrule), NPT / BSP (M/F)Size : 6mm to 42mm, 1/8” to 1 1/2”Pressure : Ranging from 100Bar to 630Bar depending on type and sizeMaterial : Steel, Stainless Steel, Brass (From extruded bar or forging)Surface Treatment : Steel – Zinc Coated (A3C) or PhospatisedStainless Steel – NaturalBrass – Natural
View DetailsMin Order Qty 1 Piece
J. J. manufactures wide variety of valves to suit various applications. Different kind of valvemanufactured are Needle Valve, Ball Valve / Shut off Valve, Flow Control Valve, Non Return Valve / Check valve, Manifold Valve. Check ValveType : Non Return ValveEnd Connection : Tube end (Single Ferrule & Double Ferrule), NPT / BSP (M/F)Size : 6mm to 42mm, 1/4” to 2”Pressure : Ranging from 100Bar to 630Bar depending on type and sizeMaterial : Steel, Stainless Steel, Brass (From extruded bar or forging)Surface Treatment : Steel – Zinc Coated (A3C) or PhospatisedStainless Steel – NaturalBrass – Natural
View DetailsMin Order Qty 1 Piece
J. J. manufactures wide variety of valves to suit various applications. Different kind of valvemanufactured are Needle Valve, Ball Valve / Shut off Valve, Flow Control Valve, Non Return Valve / Check valve, Manifold Valve. Flow Control ValveType : With & with out check valve (Color Calibration Scale for easy setup)End Connection : BSP / NPT FemaleSize : 1/4” to 2”Pressure : Ranging from 130Bar to 300Bar depending on type and sizeMaterial : Steel, Stainless Steel, BrassSurface Treatment : Steel – Zinc Coated (A3C) or PhospatisedStainless Steel – NaturalBrass – Natural
View DetailsMin Order Qty 1 Piece
J. J. manufactures wide variety of valves to suit various applications. Different kind of valvemanufactured are Needle Valve, Ball Valve / Shut off Valve, Flow Control Valve, Non Return Valve / Check valve, Manifold Valve, Safety Valve Safety Valve used to release the extra pressure which is built in the system. Safety ValveType : Angle TypeEnd Connection : Tube end (Single Ferrule & Double Ferrule), NPT / BSP (M/F)Size : 6mm to 42mm, 1/8” to 1 1/2”Release Pressure : Ranging from 100Bar to 300Bar Material : Steel, Stainless Steel, (From extruded bar or forging)Surface Treatment : Steel – Zinc Coated (A3C) or PhospatisedStainless Steel – Natural
View DetailsMin Order Qty 1 Piece
J. J. Manifold valve are design for separate mounting, connecting system lines & transmitters, havingsimple configuration which allows for easy block, bleed, and calibration of a static pressure transmitteror gauge. Manifold is available in 2, 3 & 5 valve design. These Manifold valve combine the functions of a tee, calibration valve, isolation valve and all tubing and fittings into a single compact unit thus reducing number of fittings and space required for installation. Type : Pipe to Pipe, Pipe to Flange, Flange to Flange, Remote Mount, Direct MountEnd Connection : NPT FemaleSize : 1/4” or 1/2”Pressure : 270 BarMaterial : Steel, Stainless Steel,Surface Treatment : Steel – Zinc Coated (A3C) or PhospatisedStainless Steel – Natural
View DetailsMin Order Qty 1 Set
“JJ-HYD” high pressure steel fittings are manufactured to DIN 2353 specification and ISO 8434 – 1 for ease of Interchangeability. These fittings are available for different pressure rating from 100Bar to 630Bar Type : Flare less Bite Type (Single Ferrule), Weld Nipple Type Standard : DIN 2353 / ISO 8434 - 1 Series : LL (Very Light), L (Light), S (Heavy) Size : 4mm to 42mm,1/8”OD to 2”OD, 1/8”NB to 2”NB Pressure : Ranging from 100Bar to 630Bar depending on type and size Material : Steel, Stainless Steel, Brass (From extruded bar or forging) Surface Treatment : Steel – Zinc Coated (A3C) or Phospatised, Trivalent Stainless Steel – Electro polished, Nut Silver Plated to avoid galling, Brass – Natural
View DetailsMin Order Qty 1 Piece
Mercury designs and manufactures a wide range of pneumatic valves such as direct acting Solenoid valves, Spool and poppet type solenoid valves, Pneumatically and Mechanically actuated Valves, Flow and pressure control valves as well as special Pneumatic valves for OEM’s and High pressure valves for the PET blow moulding industry. Pneumatic valves are available in ranges from 1/8” BSP to 1” BSP port sizes in 3/2, 5/2 and 5/3 configurations.Mercury’s special design ‘T’ ring spool valves introduced in 1980 have stood the test of time and are still the favorite choice of their OEM customers.
View DetailsGST Verified
Min Order Qty 1 Piece
“Mercury “ Direct acting valves are available in 2 series i.e D series and ND series. The same are available in 2WAY and 3WAY configurations in various port sizes . Gang manifold assemblies are also available. These valves are compact and are used for specific applications.
View DetailsGST Verified
Min Order Qty 1 Piece
Mercury” Spool type solenoid valves are available in 2 series i.e MS series and NS series. The same are available in 3 WAY and 4 WAY configurations in various port sizes. Gang manifold assemblies are also available. These valves are compact and versatile .
View DetailsGST Verified
Min Order Qty 1 Piece
“ Mercury” offers a selection of solenoid coils and connectors ranging from 6VDC to 230VAC with Black or illuminated connectors. They come in various sizes i.e M17, M22 and M32 which can be used in conjunction with Mercury solenoid valves. The timer operated solenoid valves come with OFF delay , ON delay and CYCLIC functionalities.
View DetailsGST Verified
Min Order Qty 1 Unit
“Mercury” was the first Indian manufacturer to launch VDMA/ISO type Pneumatic cylinders with a built in magnetic Piston. Today, after various technological advancements, our ISO series cylinders are the choice of many OEM’s . The special seal designs, low weight extrusions and inhouse honing capabilities ensures a quality product in a very short lead time. Due to inhouse manufacturing control, Mercury ISO cylinders are available in a variety of lengths ranging from 20mm to as long as 2000mm . “Mercury” Pneumatic cylinders are categorically divided into 2 series ie “AM” Series for cylinders ranging from 32mm to 100mm Bore and “AT” series ranging from 125mm to 200mm.
View DetailsGST Verified
Min Order Qty 1 Piece
Air preparation units are systems which are used to improve the quality of compressed air being fed into pneumatic products in order to improve their life as well as control the pressure / flow of shop compressed air. They consist mainly of the following, (a) Filters : To remove moisture in the compressed air (b) Regulator: To regulate and control the pressure of air being fed into the pneumatic systems (c) Lubricator : To add oil to the compressed air which in turn lubricates the moving parts / seals in a pneumatic system thus increasing the overall life of the system.
View DetailsGST Verified
Min Order Qty 1 Piece
It is not unusual that, during some applications the thrust generated by a pneumatic system is not sufficient for a specific purpose that it has been designed for. In order to get a higher output pressure , the inlet pressure needs to be increased which in some cases may require to be higher that the shop line pressure. It is in those situations that MERCURY Air Boosters are the ideal solution to generate the desired outcome.
View DetailsGST Verified
Min Order Qty 1 Piece
The product range consists of Pneumatic Cylinders, Hydro-Pneumatic Presses, Hydro-Pneumatic Pump and special products for OEM applications. Our special 'T' rings design Spool Valves, introduced in 1980, have stood the test or time and are competing successfully against products of several multinational firms now operating in India.
View DetailsGST Verified
Min Order Qty 1000 Square Feet
Cockroach exterminators use different types of pesticides for eradicating infestation. These types of insecticdes include baits (in the form of granules, liquid, gel), aerosol sprays, and foggers contain chemicals that pose a threat to the environment and to human health.
View DetailsGST Verified
Min Order Qty 1 Unit
Ralsonics’ table top ultrasonic cleaners are robust and powerful cleaners designed for heavy duty as well as gentle cleaning of all the small components.Ultrasonic cleaners offer the most efficient and uniform cleaning of all techniques. Contaminants like grease, debris, particles and soiling can be removed from your parts with the proper cleaning agent. Ralsonics’ table top cleaners are designed for years of continuous usage.
View DetailsMin Order Qty 1 Unit
Ralsonics’ compact ultrasonic cleaners are designed for small items in small batches. They remove contamination from complicated parts which are hard to access by manual cleaning with damage. They can also be used for degassing solvents and dispersing solid samples. Being relatively inexpensive and compact, they are ideal for professional maintenance cleaning.
View DetailsMin Order Qty 1 Unit
Ralsonics’ chilled ultrasonic cleaners are specially designed for processes that require low temperatures. They consist of an inbuilt chiller unit that helps with hands free control of temperature rise due to ultrasonics. In case solvents having low boiling points are used, the chiller helps reduce evaporation losses to the atmosphere.
View DetailsMin Order Qty 1 Unit
Ralsonics’ tube resonators are the most powerful ultrasonic cleaning tools available in the market. They are specially designed for the most demanding applications requiring high throughput, high efficiency cleaning and extreme environmental conditions.
View DetailsMin Order Qty 1 Unit
Ralsonics’ immersible bricks allow you to convert your existing cleaning tank into a high quality ultrasonic cleaning tank. The transducers are sealed in a leak tight housing which can be mounted anywhere in your tank. Furthermore, these can be customized to the exact sizes you require. They are easily replaceable and movable from tank to tank.
View DetailsMin Order Qty 1 Unit
Over four decades, Ralsonics has made ultrasonic cleaning machines for over a hundred applications. Based on this experience, we have developed our standard product lines. 99% of cleaning applications can be covered by our standard line of equipment. However, there are always special cases like uncommon sizes, extreme high purity requirements, unconventional process flows. In such cases, Ralsonics will build an ultrasonic cleaning equipment completely customized for you.
View DetailsMin Order Qty 1 Unit
Ralsonics’ flagship product, Ralsonics’ multistage all-purpose cleaners are the ultimate solution in the complete cleaning of any part or assembly known to mankind. Ralsonics’ multistage cleaners combine the power of ultrasonic cleaning with pressure washing, rinsing, drying and multiple other thorough cleaning techniques developed over decades of solving unique cleaning problems. Multiple cleaning techniques applied in combination work to complement the strengths of each technique.
View DetailsMin Order Qty 1 Unit
Ralsonics’ vacuum powered multistage cleaners are innovative systems specifically designed for intricate parts with blind holes and other unique features. This method of precision cleaning is significantly more effective than regular ultrasonic cleaning. The entire cleaning process is performed in a vacuum environment.
View DetailsMin Order Qty 1 Unit
Ralsonics’ large ultrasonic cleaners are designed to operate in harsh industrial environments where heavy duty cleaning is a requirement. They are all purpose cleaners which drastically save time, labour and chemical costs. All contaminants can be removed by these cleaners while adhering to strict requirements of different industrial sectors.
View DetailsGST Verified
Min Order Qty 800 Piece
Cutting Wheels OD 100mm ID 16mm Thickness 01.2mm 50 Piece/pack
View DetailsGST Verified
Min Order Qty 1000 Unit
WE MANUFACTURE HIGH TENSILE HOT FORING HEX NUT BOLT
View DetailsGST Verified
Min Order Qty 1500 Unit
1) Material: CRCA (Cold Rolled & Cold Annealed Sheet) 2) Dimension (MM): (A) 455*495*1.50 – Loading Capacity 150 Kg (B) 455*495*2.00 – Loading Capacity 200 Kg (C) 550*455*1.50 – Loading Capacity 200 Kg (D) 600*600*2.00 – Loading Capacity 200 Kg 3) Surface Treatment: Polyester Power Coating with Rust Protection 4) Expansion Screw: Nut Bolt ¾ & 1.25 X 5/16, Spring & Plain Washer 5) Packaging: Corrugated box per unit, 12 Units per Box 6) Features: (A)Light Weight (B)Highly Durable (C) Corrosion Proof (D) Rust Resistance (E)Strong Design (F) Accurate Dimensions
View DetailsGST Verified
Min Order Qty 10 Unit
2HP SINGLE STAGE COMPRESSOR,160LTR AIR RECEIVER WITH STANDARD FITTINGS, WITH AUTO CUT OFF PRESSURE SWITCH, PRESSURE GUAGE, SAFTEY VALVE IF PRESSURE OS OVER LOADING OPTION, PORTABLE TYPE PREMIUM QUALITY.
View DetailsMin Order Qty 10 Unit
3HP SINGLE STAGE AIR COMPRESSOR,160LTR & 200LTR CAPACITY WITH AUTO CUT OFF PRESSURE SWITCH, DOL STARTER,BRANDED MOTOR, PRESSURE GUAGE. ALL ARE PREMIUN QUALITY.
View DetailsMin Order Qty 5 Unit
5HP SINGLE STAGE AIR COMPRESSOR,220 LTR & 250 LTR & 300 LTR AIR RECEIVER,AUTO CUT OFF PRESSURE SWICH WITH PREMIUM QUALITY
View DetailsMin Order Qty 5 Unit
5HP TWO STAGE AIR COMPRESSOR,5HP BRANDED MOTOR,BRANDED DOL STARTER,HEAVY AIR RECEIVER WITH STD ACCESSORIES, MULTI COLOR ALSO AVAILABLE.PREMIUM QUALITY PRODUCTS
View DetailsMin Order Qty 5 Unit
10HP AIR COMPRESSOR 500LTR AIR RECEIVERS AUTO CUT OFF PRESSURE SWITCH, DOL AND STAR DELTA STARTER,BRANDED MOTOR,PREMIUM QUALITY SPARES.
View Details